How would I go about doing some of these cool tricks for Linux based system?
Which one in particular ? 
Topic: Discussion Thread For Computer Tips, Tricks and Facts (Read 2264 times)
How would I go about doing some of these cool tricks for Linux based system?
Trick for the day
Easy Steps to Change your IP in less than a minute.
Here is the 10 most easy quick step method to change the IP address by changing the properties in LAN (Local Area Netwok).
Step 1:
Click on "Start"---> "Run"
Then Type in "command" or "cmd" and hit OK or press ENTER.
Step 2:
In the Command Prompt also known as "MS-DOS" prompt just type "ipconfig /release" & Hit Enter.
Type "exit" and leave the
prompt
Step 3:
Right-click on "Network Places" or "My Network Places" ---> Click on "properties" .Then Right click on "Local Area Connection"--->Click
"properties"
Step 4:
Now click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
Step 5: Click on "Use the following IP address" under the "General" tab
BINGOOO,,,,!!! Now you can type in your own IP address .
Step 6:
Now Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
Step 7:
Hit the "Ok" button twice and you are now back to the "Local Area
Connection" screen.
Step 8:
Now Right-click back on "Local Area Connection" and go to properties again.
Step 9:
Go back to the "TCP/IP" settings
Now , Select "Obtain an IP address automatically"
Step 10:
Hit "Ok" twice again
NOTE: You now have a new IP address However it only changes your
dynamic IP address and not not your ISP/IP address.
Hope you enjoyed this post,,,!!! Cheers,,,!!!
NOTE:If you have queries or any related post to this topic I request you to pls Post them on link below: All other Posts will be deleted
Discussion Thread for Computer Tips, Tricks and Facts
Easy Steps to Change your IP in less than a minute.
Here is the 10 most easy quick step method to change the IP address by changing the properties in LAN (Local Area Netwok).
Step 1:
Click on "Start"---> "Run"
Then Type in "command" or "cmd" and hit OK or press ENTER.
Step 2:
In the Command Prompt also known as "MS-DOS" prompt just type "ipconfig /release" & Hit Enter.
Type "exit" and leave the
prompt
Step 3:
Right-click on "Network Places" or "My Network Places" ---> Click on "properties" .Then Right click on "Local Area Connection"--->Click
"properties"
Step 4:
Now click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
Step 5: Click on "Use the following IP address" under the "General" tab
BINGOOO,,,,!!! Now you can type in your own IP address .
Step 6:
Now Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
Step 7:
Hit the "Ok" button twice and you are now back to the "Local Area
Connection" screen.
Step 8:
Now Right-click back on "Local Area Connection" and go to properties again.
Step 9:
Go back to the "TCP/IP" settings
Now , Select "Obtain an IP address automatically"
Step 10:
Hit "Ok" twice again
NOTE: You now have a new IP address However it only changes your
dynamic IP address and not not your ISP/IP address.
Hope you enjoyed this post,,,!!! Cheers,,,!!!
NOTE:If you have queries or any related post to this topic I request you to pls Post them on link below: All other Posts will be deleted
Discussion Thread for Computer Tips, Tricks and Facts
Absolutely wrong on so many levels.
Step 1 and 2 are totally unneeded.
Step 3 could be shortened to just running ncpa.cpl as a command. Also, they might be using wireless rather than hardwared.
Step 4 should specify that you're modifying IPv4.
Step 5:
Step 6: Wrong on so many levels. There's a thing called "subnetting" and a subnet mask is actually useful. Say I had a 10.1.10.0/24 network, right? Well, default subnet mask is 255.0.0.0. The correct subnet mask for that network is 255.255.255.0. What does this mean? It means if a webserver is on another internal network that's not behind your router, you'll never be able to reach it as the subnet mask says the address is local.
Step 7: Yay! You configured a static IP address. Please tell me that's ALL this tutorial was? Cause if so, you literally can do it in like 5 seconds via CMD / powershell.
Step 8: Wait what? Why!?
Step 9: Are you fucking kidding me? You're setting it back to a dynamic IP address? Are you retarded. If so, you could have done step 1, typed "ipconfig /release && ipconfig /renew" and you're fucking done.
Step 10: No, just no.
Tip of the Day
Easiest Way to Download videos from YOUTUBE without any software or addon. Just Follow the following steps
Step 1: Open any video on YouTube that you want to download. Every youtube video has an unique link [that you must know already] This is YouTube video link:
Step 2:Delete www. and paste ss like this:
delete http: and everything ahead of youtube.com and paste ss and Press Enter
Step 3: Now it will take you to a new website named "Save From"
Just click the Format of video you want and thats it.
NOTE:If you have queries or any related post to this topic I request you to pls Post them on link below: All other Posts will be deleted
Discussion Thread for Computer Tips, Tricks and Facts
Easiest Way to Download videos from YOUTUBE without any software or addon. Just Follow the following steps
Step 1: Open any video on YouTube that you want to download. Every youtube video has an unique link [that you must know already] This is YouTube video link:
Step 2:Delete www. and paste ss like this:
delete http: and everything ahead of youtube.com and paste ss and Press Enter
Step 3: Now it will take you to a new website named "Save From"
Just click the Format of video you want and thats it.
NOTE:If you have queries or any related post to this topic I request you to pls Post them on link below: All other Posts will be deleted
Discussion Thread for Computer Tips, Tricks and Facts
That's a third party site. Therefore, you are technically opening yourself to a lot of vulnerabilities by using some random site on the internet to download files.
So far the tips, tricks, and facts thread has been rather useless in giving any sort of knowledge.
Do You Understand Flowcharts ..? if No. This might help..
how about a virus that will mine cryptos for us? 
good idea, lol... but when the cryptos turn out to be a scam then it's useless unless we can control which cryptos to mine
Firefox has all kinds of about: pages.
about:config
about:support
about:mozilla
about:robots
and others...
Also there is about:memory about:config
about:support
about:mozilla
about:robots
and others...
Bro, you replaced LED script with CD rom ejecting script >.<
Led one is here.
http://freshadda.com/tricks_adda/Keyboard_Dancing_LED_Light_Trick.php
Sorry Messed up..! I had two in mind..! one with led and other Cdrom messed it up Led one is here.
http://freshadda.com/tricks_adda/Keyboard_Dancing_LED_Light_Trick.php
Fixed now 
Quoted from Computer Tricks Thread
Most of the how to's and tricks that I came across and built them into PDF's.
Shared folder.
https://www.dropbox.com/sh/55rg52f8b6pc4hq/AACAybPQ2gEAj47sLvljqTARa
Great collection you have there..! I have a good collection of useful and howto on my blog ..! Shared folder.
https://www.dropbox.com/sh/55rg52f8b6pc4hq/AACAybPQ2gEAj47sLvljqTARa
Bro, you replaced LED script with CD rom ejecting script >.<
Led one is here.
http://freshadda.com/tricks_adda/Keyboard_Dancing_LED_Light_Trick.php
Led one is here.
http://freshadda.com/tricks_adda/Keyboard_Dancing_LED_Light_Trick.php
it is not working in Google chrome . there is no such option as add a keyword for search when i right click on the search bar .
And this is why mate I prefer Mozilla Firefox over Google Chrome..! This works flawlessly on Firefox don't know about Google chrome..! will update the post. Use address bar of your browser to search for any Bitcoin address , SHA hash , Tr id etc
Follow These Steps:
1st:
Go to the webpage on the site where the search box is visible In this case Visit BlockChain . Right Click on Search box and Select " Add a keyword for this search.. "
2nd:
Fill in the bookmark creation dialog box with an appropriate bookmark name and keyword. Try to keep the keyword easy and short.
3rd:
Now you can just go to address bar [ctrl+l or F6] type in your bookmark keyword followed by Space then search string
4th:
Hit ENTER and you will get all the necessary required details.
NOTE:If you have any queries or wanna say thank you I request you to pls Post them on link below:
Discussion Thread for Computer Tips, Tricks and Facts
Follow These Steps:
1st:
Go to the webpage on the site where the search box is visible In this case Visit BlockChain . Right Click on Search box and Select " Add a keyword for this search.. "
2nd:
Fill in the bookmark creation dialog box with an appropriate bookmark name and keyword. Try to keep the keyword easy and short.
3rd:
Now you can just go to address bar [ctrl+l or F6] type in your bookmark keyword followed by Space then search string
4th:
Hit ENTER and you will get all the necessary required details.
NOTE:If you have any queries or wanna say thank you I request you to pls Post them on link below:
Discussion Thread for Computer Tips, Tricks and Facts
it is not working in Google chrome . there is no such option as add a keyword for search when i right click on the search bar .
Firefox has all kinds of about: pages.
about:config
about:support
about:mozilla
about:robots
and others...
about:config
about:support
about:mozilla
about:robots
and others...
my fav trick for win 7&8
ctrl + tab
or
start + tab
ctrl + tab
or
start + tab
shift+tab
FTFY
In this case ctrl+tab while using on a browser will take you to the next tab on right while hitting ctrl+shift+tab will take you to the tab on the left.
my fav trick for win 7&8
ctrl + tab
or
start + tab
ctrl + tab
or
start + tab
shift+tab
FTFY
my fav trick for win 7&8
ctrl + tab
or
start + tab
ctrl + tab
or
start + tab
shift+tab
FTFY
Also if some virus or toolbar broke Firefox's settings you can you about:support to reset Firefox's settings completely.
my fav trick for win 7&8
ctrl + tab
or
start + tab
ctrl + tab
or
start + tab
Also CTRL + Shift + P opens a secret windows in Firefox.
If you missed it I already posted it before in previous posthttps://bitcointalksearch.org/topic/discussion-thread-for-computer-tips-tricks-and-facts-644628
Think beyond shortcut keys :p
Also CTRL + Shift + P opens a secret windows in Firefox.
If you missed it I already posted it before in previous posthttps://bitcointalksearch.org/topic/discussion-thread-for-computer-tips-tricks-and-facts-644628
Think beyond shortcut keys :p
Wow the ctrl L shortcut saved my life lol
One can also use alt+d or F6 to goto the add-bar . works well with Firefox don't know about others.Ctrl+N in Firefox opens a new window.
F6 is a great shortcut
Jump to: