Topic: DiY ArduLonMiner - page 6. (Read 19323 times)
Have you considered using a Beaglebone Black?
Check how you are going to power them.
4 avalon chips that is at least 6.6W of power consumption so your ramp would have to be powered externally.
Are you going to reuse their controller?, add more...
4 avalon chips that is at least 6.6W of power consumption so your ramp would have to be powered externally.
Are you going to reuse their controller?, add more...
Nice, are you building it like a bitcoin mining shield that anyone could buy and hook up to their arduino?
Hi, yes this is main idea.
Check how you are going to power them.
4 avalon chips that is at least 6.6W of power consumption so your ramp would have to be powered externally.
Are you going to reuse their controller?, add more..
4 avalon chips that is at least 6.6W of power consumption so your ramp would have to be powered externally.
Are you going to reuse their controller?, add more..
Hi, arudino DUE has only 5V and 3,3V power bus, Avalon logic can be powered from 3,3V arduino regulator. shield will contain 1,2 V power supply for Avalon IP Cores (DC-DC converter 12V to 1,2V so only one 12V arduino power plug will be used).
UPDATE:
Yesterday night I programmed routines for communication with Avalon.
I still have to resolve these parts:
- Hash precalculations for Avalon
- Building data block for Avalon
- Communication with cgminer
Used and programmed a DUE before. Will be watching.
good idea!
Definitely interested.
Nice, are you building it like a bitcoin mining shield that anyone could buy and hook up to their arduino?
registering interest...
Personally I love the pi, be interesting to see what this can do
Personally I love the pi, be interesting to see what this can do
I love arduino, but I'm not very experienced with it.
But anyway, I'm interested in this project and wish you much success.
But anyway, I'm interested in this project and wish you much success.
Greetings.
Why don't you try it with the Raspberry Pi?
Good luck with your project.
Why don't you try it with the Raspberry Pi?
Good luck with your project.
Hi, thanks for interrest.
Because for communication with avalon chip is necessary to guarantee low latency and
precisely timing and it is not possible to achieve with classic OS. Only RTOS is useful but its very complicated for many users.
Arduino platform is easy to install, upgradable and code work native without OS.
Why do you post this in the german subforum?
Greetings.
Why don't you try it with the Raspberry Pi?
Good luck with your project.
Why don't you try it with the Raspberry Pi?
Good luck with your project.
Project: DiY ArduLonMiner
This HW will be based on Arduino DUE control unit with plugged Avalon rig board & ethernet shield. This miner is regular device whitch support direct connection to bitcoin pool !
http://i39.tinypic.com/o06viw.png
http://arduino.cc/en/uploads/Main/ArduinoDue_Front.jpg
Features:
-Fully opensourced HW and SW
-Direct USB connection
-Direct Bitcoin POOL connection (via ethernet shiled)
-Easy software update via Arduino Studio
-32Bit Arm Cortex M3 CPU Atmel SAM3
-3,3v operating voltage for direct chip to chip communication without Logic Level conversion
-84Mhz operation frequency
-Hashing power max. 9Gh/s - 3 Avalon modules
-Arduino shiled:
http://i39.tinypic.com/dgjqdj.png
Web configuration:
http://i44.tinypic.com/2vwzp6u.png
Videos:
http://www.youtube.com/watch?v=yZJHI0_Yi5A
Please note, this is my free-time project so if someone wants to support this project may send me some coins. Thanks.
Donation Address BTC:1Ft43RmmPN52A48GM6gnNYPKwztiHcKV3
This HW will be based on Arduino DUE control unit with plugged Avalon rig board & ethernet shield. This miner is regular device whitch support direct connection to bitcoin pool !
http://i39.tinypic.com/o06viw.png
http://arduino.cc/en/uploads/Main/ArduinoDue_Front.jpg
Features:
-Fully opensourced HW and SW
-Direct USB connection
-Direct Bitcoin POOL connection (via ethernet shiled)
-Easy software update via Arduino Studio
-32Bit Arm Cortex M3 CPU Atmel SAM3
-3,3v operating voltage for direct chip to chip communication without Logic Level conversion
-84Mhz operation frequency
-Hashing power max. 9Gh/s - 3 Avalon modules
-Arduino shiled:
http://i39.tinypic.com/dgjqdj.png
Web configuration:
http://i44.tinypic.com/2vwzp6u.png
Videos:
http://www.youtube.com/watch?v=yZJHI0_Yi5A
Please note, this is my free-time project so if someone wants to support this project may send me some coins. Thanks.
Donation Address BTC:1Ft43RmmPN52A48GM6gnNYPKwztiHcKV3
Jump to: