DRILLBIT SYSTEM Miners - Avalon range available - Now $104.99! - page 23.

Unacceptable

legendary

Activity: 2212

Merit: 1001

Quote from: erk on December 09, 2013, 05:41:17 PM

Quote from: lajz99 on December 09, 2013, 04:14:43 PM

Barntech / bobsag, can you please confirm or deny this?

Quote from: Bicknellski on December 09, 2013, 08:18:31 AM

Drillbit / Bobsag3 they both had production runs through BlackArrow for their relative boards correct?

Blackarrow is a competitor of Bitfury, think aboout it!

Maybe they are,but they have made units with Avalon chips & recently with Bitfury chips Wink

As far as them making Drillbits boards,haven't heard anything about that,cept in another tread in custom hardware section where it is just speculation....as of now:

https://bitcointalksearch.org/topic/m.3890570

erk

hero member

Activity: 826

Merit: 500

Quote from: lajz99 on December 09, 2013, 04:14:43 PM

Barntech / bobsag, can you please confirm or deny this?

Quote from: Bicknellski on December 09, 2013, 08:18:31 AM

Drillbit / Bobsag3 they both had production runs through BlackArrow for their relative boards correct?

Blackarrow is a competitor of Bitfury, think aboout it!

lajz99

hero member

Activity: 756

Merit: 500

Barntech / bobsag, can you please confirm or deny this?

Quote from: Bicknellski on December 09, 2013, 08:18:31 AM

Drillbit / Bobsag3 they both had production runs through BlackArrow for their relative boards correct?

bronan

hero member

Activity: 774

Merit: 500

Lazy Lurker Reads Alot

Quote from: DutchyGn on December 09, 2013, 10:20:18 AM

Quote from: bronan on December 09, 2013, 09:33:25 AM

Quote from: kabopar on December 07, 2013, 09:51:03 PM

Quote from: bronan on December 07, 2013, 08:42:11 PM

As i already expected nothing has been arrived and no answers from barntech where my order is.
There is no trackable info found anywhere with the given code.
I see other people in europe got their items a few days ago, the usa people are already hashing.... here nothing and diff going up soon again

Where are you Bronan?
I think that in Australia Barntech held off board shipping until the fix is applied.

Cheers

I am in the netherlands and barntech said it has been send
However i can not find any packages with the given track code or have received anything as of yet
But i see people who live near me already asnwered the repair board on the drillbit forum who live near me
I am not sure if they received anythin but i sure as hell did not.

Barntech has not answered on my email for more then 2 weeks but has posted on the forum ...
So yes i am worried
Especially since i spend a small fortune on this which probably never gonna repay what i put into this

All usa people seem to hashing fine and making coins but i have nothing but worries

I feel being screwed here pretty hard

Especially since i paid 95 usa dollar for express postage which should be able to be tracked

Have you tried entering you trackingcode here: http://auspost.com.au/track/track.html ?
I've entered my code here and could follow my package.

nope nothing to track the code says not trackable or is not a proper code on other track sites:

This is showed by the aussie mail link:

Product not trackable

What does 'Product not trackable' mean?

jedimstr

hero member

Activity: 798

Merit: 1000

Quote from: bronan on December 09, 2013, 09:58:19 AM

Quote from: WinterParker on December 09, 2013, 09:37:14 AM

I can't get my "eights" to work, i have tried everything!!! I suppose thats what you guys are speaking of?? What was the whole batch not working? Geeezzz.....

you have to send them for repairs because they have issues with some element on them is all i know

Check out the info on the Drillbit Forums: http://drillbitsystem.com/forum/index.php?board=1.0
Especially the Repair sticky and the various regional Repair Queue threads.

DutchyGn

newbie

Activity: 42

Merit: 0

Quote from: bronan on December 09, 2013, 09:33:25 AM

Quote from: kabopar on December 07, 2013, 09:51:03 PM

Quote from: bronan on December 07, 2013, 08:42:11 PM

As i already expected nothing has been arrived and no answers from barntech where my order is.
There is no trackable info found anywhere with the given code.
I see other people in europe got their items a few days ago, the usa people are already hashing.... here nothing and diff going up soon again

Where are you Bronan?
I think that in Australia Barntech held off board shipping until the fix is applied.

Cheers

I am in the netherlands and barntech said it has been send
However i can not find any packages with the given track code or have received anything as of yet
But i see people who live near me already asnwered the repair board on the drillbit forum who live near me
I am not sure if they received anythin but i sure as hell did not.

Barntech has not answered on my email for more then 2 weeks but has posted on the forum ...
So yes i am worried
Especially since i spend a small fortune on this which probably never gonna repay what i put into this

All usa people seem to hashing fine and making coins but i have nothing but worries

I feel being screwed here pretty hard

Especially since i paid 95 usa dollar for express postage which should be able to be tracked

Have you tried entering you trackingcode here: http://auspost.com.au/track/track.html ?
I've entered my code here and could follow my package.

bronan

hero member

Activity: 774

Merit: 500

Lazy Lurker Reads Alot

Quote from: WinterParker on December 09, 2013, 09:37:14 AM

I can't get my "eights" to work, i have tried everything!!! I suppose thats what you guys are speaking of?? What was the whole batch not working? Geeezzz.....

you have to send them for repairs because they have issues with some element on them is all i know

WinterParker

sr. member

Activity: 356

Merit: 250

Dock.io

I can't get my "eights" to work, i have tried everything!!! I suppose thats what you guys are speaking of?? What was the whole batch not working? Geeezzz.....

bronan

hero member

Activity: 774

Merit: 500

Lazy Lurker Reads Alot

Quote from: kabopar on December 07, 2013, 09:51:03 PM

Quote from: bronan on December 07, 2013, 08:42:11 PM

As i already expected nothing has been arrived and no answers from barntech where my order is.
There is no trackable info found anywhere with the given code.
I see other people in europe got their items a few days ago, the usa people are already hashing.... here nothing and diff going up soon again

Where are you Bronan?
I think that in Australia Barntech held off board shipping until the fix is applied.

Cheers

I am in the netherlands and barntech said it has been send
However i can not find any packages with the given track code or have received anything as of yet
But i see people who live near me already asnwered the repair board on the drillbit forum who live near me
I am not sure if they received anythin but i sure as hell did not.

Barntech has not answered on my email for more then 2 weeks but has posted on the forum ...
So yes i am worried
Especially since i spend a small fortune on this which probably never gonna repay what i put into this

All usa people seem to hashing fine and making coins but i have nothing but worries

I feel being screwed here pretty hard

Especially since i paid 95 usa dollar for express postage which should be able to be tracked

JBT

full member

Activity: 165

Merit: 100

well i think all the hard work is appreciated , i only have this week and next then my company closes for Dec....i'll wager 0.01 BTC i wont be this year.

jedimstr

hero member

Activity: 798

Merit: 1000

Quote from: Zeek_W on December 07, 2013, 09:17:19 AM

It's a saying here, not actually going to bet money on something we already wagered money on. Now we just have to sit and wait for the fix, the n the shipping, then AusPost during Xmas time.

It's a saying here too Wink

kabopar

hero member

Activity: 616

Merit: 500

Quote from: bronan on December 07, 2013, 08:42:11 PM

As i already expected nothing has been arrived and no answers from barntech where my order is.
There is no trackable info found anywhere with the given code.
I see other people in europe got their items a few days ago, the usa people are already hashing.... here nothing and diff going up soon again

Where are you Bronan?
I think that in Australia Barntech held off board shipping until the fix is applied.

Cheers

bronan

hero member

Activity: 774

Merit: 500

Lazy Lurker Reads Alot

As i already expected nothing has been arrived and no answers from barntech where my order is.
There is no trackable info found anywhere with the given code.
I see other people in europe got their items a few days ago, the usa people are already hashing.... here nothing and diff going up soon again

Its About Sharing

legendary

Activity: 1442

Merit: 1000

Antifragile

Quote from: erk on December 07, 2013, 10:55:06 AM

Quote from: Its About Sharing on December 07, 2013, 09:55:55 AM

Quote from: jedimstr on December 07, 2013, 09:07:28 AM

Quote from: Zeek_W on December 07, 2013, 08:27:09 AM

Quote from: erk on December 07, 2013, 04:05:43 AM

Quote from: jedimstr on December 07, 2013, 04:02:03 AM

You guys really should checkout the other forum. It's been great to keep up to date and have direct contact with the rest of the Drillbit team (not just Barn) especially when BitcoinTalk went down. As Barn mentioned here the other day, all the updates and ongoing discussion with the engineers and the repair guys is happening over there.

To summarize, they think they have a solution bypassing the issue using an added linear regulator and are doing extensive tests now. We're all just waiting to hear back from the AU team.

So it's still not sorted out.
Oh well, hopefully it wont be too many more days.

I'm wagering next year.

They already have them running for a day or two with the linear regulators. Repair teams in EU and US are ready for the say-so from AU... So how much you want to wager? Wink

Any idea on a part number? I'd like to source this.

Also, does this mean we no longer need the inductors replaced? (And I guess I can cancel the regulator order)

I don't understand why you ordered parts before they had solved the problem?

I guess they are not expensive.

The parts - inductors and regulators cost 20 and 30 Euro shipping. I will lose 20 Euros for shipping if I return them (here and back).
If those parts work and it takes 3 days for shipping for those parts and I have 4 boards, that is around .3 BTC. So, for a 20 Euro insurance policy, I can protect about .3 BTC of "wealth".
But it looks like I merely lost on this insurance policy. So, I'd like to source the serial regulators as they seem like they are working so far.

Now do you understand? Grin

erk

hero member

Activity: 826

Merit: 500

Quote from: Its About Sharing on December 07, 2013, 09:55:55 AM

Quote from: jedimstr on December 07, 2013, 09:07:28 AM

Quote from: Zeek_W on December 07, 2013, 08:27:09 AM

Quote from: erk on December 07, 2013, 04:05:43 AM

Quote from: jedimstr on December 07, 2013, 04:02:03 AM

You guys really should checkout the other forum. It's been great to keep up to date and have direct contact with the rest of the Drillbit team (not just Barn) especially when BitcoinTalk went down. As Barn mentioned here the other day, all the updates and ongoing discussion with the engineers and the repair guys is happening over there.

To summarize, they think they have a solution bypassing the issue using an added linear regulator and are doing extensive tests now. We're all just waiting to hear back from the AU team.

So it's still not sorted out.
Oh well, hopefully it wont be too many more days.

I'm wagering next year.

They already have them running for a day or two with the linear regulators. Repair teams in EU and US are ready for the say-so from AU... So how much you want to wager? Wink

Any idea on a part number? I'd like to source this.

Also, does this mean we no longer need the inductors replaced? (And I guess I can cancel the regulator order)

I don't understand why you ordered parts before they had solved the problem?

I guess they are not expensive.

Its About Sharing

legendary

Activity: 1442

Merit: 1000

Antifragile

Quote from: jedimstr on December 07, 2013, 09:07:28 AM

Quote from: Zeek_W on December 07, 2013, 08:27:09 AM

Quote from: erk on December 07, 2013, 04:05:43 AM

Quote from: jedimstr on December 07, 2013, 04:02:03 AM

You guys really should checkout the other forum. It's been great to keep up to date and have direct contact with the rest of the Drillbit team (not just Barn) especially when BitcoinTalk went down. As Barn mentioned here the other day, all the updates and ongoing discussion with the engineers and the repair guys is happening over there.

To summarize, they think they have a solution bypassing the issue using an added linear regulator and are doing extensive tests now. We're all just waiting to hear back from the AU team.

So it's still not sorted out.
Oh well, hopefully it wont be too many more days.

I'm wagering next year.

They already have them running for a day or two with the linear regulators. Repair teams in EU and US are ready for the say-so from AU... So how much you want to wager? Wink

Any idea on a part number? I'd like to source this.

Also, does this mean we no longer need the inductors replaced? (And I guess I can cancel the regulator order)

Zeek_W

sr. member

Activity: 336

Merit: 250

It's a saying here, not actually going to bet money on something we already wagered money on. Now we just have to sit and wait for the fix, the n the shipping, then AusPost during Xmas time.

jedimstr

hero member

Activity: 798

Merit: 1000

Quote from: Zeek_W on December 07, 2013, 08:27:09 AM

Quote from: erk on December 07, 2013, 04:05:43 AM

Quote from: jedimstr on December 07, 2013, 04:02:03 AM

You guys really should checkout the other forum. It's been great to keep up to date and have direct contact with the rest of the Drillbit team (not just Barn) especially when BitcoinTalk went down. As Barn mentioned here the other day, all the updates and ongoing discussion with the engineers and the repair guys is happening over there.

To summarize, they think they have a solution bypassing the issue using an added linear regulator and are doing extensive tests now. We're all just waiting to hear back from the AU team.

So it's still not sorted out.
Oh well, hopefully it wont be too many more days.

I'm wagering next year.

They already have them running for a day or two with the linear regulators. Repair teams in EU and US are ready for the say-so from AU... So how much you want to wager? Wink

Zeek_W

sr. member

Activity: 336

Merit: 250

Quote from: erk on December 07, 2013, 04:05:43 AM

Quote from: jedimstr on December 07, 2013, 04:02:03 AM

You guys really should checkout the other forum. It's been great to keep up to date and have direct contact with the rest of the Drillbit team (not just Barn) especially when BitcoinTalk went down. As Barn mentioned here the other day, all the updates and ongoing discussion with the engineers and the repair guys is happening over there.

To summarize, they think they have a solution bypassing the issue using an added linear regulator and are doing extensive tests now. We're all just waiting to hear back from the AU team.

So it's still not sorted out.
Oh well, hopefully it wont be too many more days.

I'm wagering next year.

erk

hero member

Activity: 826

Merit: 500

Quote from: jedimstr on December 07, 2013, 04:02:03 AM

You guys really should checkout the other forum. It's been great to keep up to date and have direct contact with the rest of the Drillbit team (not just Barn) especially when BitcoinTalk went down. As Barn mentioned here the other day, all the updates and ongoing discussion with the engineers and the repair guys is happening over there.

To summarize, they think they have a solution bypassing the issue using an added linear regulator and are doing extensive tests now. We're all just waiting to hear back from the AU team.

So it's still not sorted out.
Oh well, hopefully it wont be too many more days.

Topic: DRILLBIT SYSTEM Miners - Avalon range available - Now $104.99! - page 23. (Read 273879 times)