Topic: DTC-Guide to Pool Mine Datacoins.Earn 0.5-2 or more $ per day with your cpu! (Read 5927 times)

On gpool, How would I check MY INDIVIDUAL stats?

heya i tried the above guide on a 32-bit windows machine and the batch file starts executing fine... i see primeminer.exe start off fine but after 2 mins it crashes...i see the below output on my command prompt.
i also tried removing the pause command at the end of the bat file... cna someone help me out here to get the mining setup properly ?

E:\datacoin-qt-i386-solo-mining-gui-131225\primeminer_v08_rc1>primeminer_x32.exe
 -poolip=dtc.xpool.xram.co -poolport=1335 -pooluser=
9RNpas -genproclimit=2 -poolshare=6
********************************************
*** Xolominer - Primecoin Pool Miner v0.8 RC1
*** by xolokram/TB - www.beeeeer.org - glhf
***
*** thx to Sunny King & mikaelh
*** press CTRL+C to exit
********************************************

GeneratePrimeTable() : setting nSieveExtensions = 9, nSievePercentage = 10, nSie
veSize = 1000000
GeneratePrimeTable() : prime table [1, 1000000] generated with 78498 primes
spawning 2 worker thread(s)
[WORKER0] Hello, World!
[WORKER0] GoGoGo!
[WORKER1] Hello, World!
[WORKER1] GoGoGo!
connecting to 162.243.241.151:1335
[MASTER] work received
PrimecoinMiner started
PrimecoinMiner started

@Greek:  Jeez, I wish I had 10 000 workers  

BTW, what setup do you have?  VPS or real computers?  Or a botnet?   

Gpool workers fluctuating wildly from 4000 workers to 22000 workers.  Not sure what is going on.

Xpool steady at about 200 workers.

Getting 1 DTC per day at Xpool (6 cores, 1 chain/d in total).

Also pools wait i think until DTC are mature.

First of all find everything about Datacoin here: https://bitcointalksearch.org/topic/ann-dtc-promo-thread-information-is-money-datacoin-implements-these-words-358592

Now first of all you have to download your Datacoin wallet if you dont have one. You can also use a web-based wallet like bter.com or coins-e.com but web-based wallets are not as secure as the wallets on your computer.
For windows you can download from here: http://sourceforge.net/projects/datacoin/files/
For Linux checck here: http://datacoin.info/index.php?id=datacoind-build-instructions-linux

After you donwload it it should take some time to synchronize and download by itself all the blocks. It takes some time to connect. You may also need to add in the help/debug window/console a few addnodes from here if it doesnt connect fast: http://datacoin.info/addnodes . You just copy paste a few of those.

After you set up a wallet make a new address. I call my address "Mining" for example. It looks like this: DQsoZjorSHBXDUhVkYn7VuSfzG2RfYLpuy


Currently there are two pools. First one is out for a day now and second one for a week. 1st one has only 30 workers while second one  30k. I prefer the first one because 1 pool must not have all the power. So i am trying to help the first one although i get less frequent payouts! But fee is also less.
1) http://dtc.xpool.xram.co/          1% Fee  
2) http://dtc.gpool.net/                2% Fee

For windows: Choose a pool. Now all you have to do in order to mine is to download this and unzip it: http://www.mediafire.com/download/473rshiav08074t/primeminer_v08_rc1.zip
In the folder there would be 4 files. Right click and edit primeminer_x64_edit-me.bat file.
If you chose the first pool delete everything in the .bat file and paste this one:

primeminer_x64.exe -pooluser=DQsoZjorSHBXDUhVkYn7VuSfzG2RfYLpuy -poolpassword=PASSWORD -poolip=dtc.xpool.xram.co -poolport=1335 -poolshare=6 -genproclimit=4

If you chose the second pool use this one

primeminer_x64.exe -pooluser=DQsoZjorSHBXDUhVkYn7VuSfzG2RfYLpuy -poolpassword=PASSWORD -poolip=162.243.41.59 -poolport=8336 -poolshare=6 -genproclimit=4

*DQsoZjorSHBXDUhVkYn7VuSfzG2RfYLpuy is my address. You have to change this to your wallet address
*4 is the number of threads that you want your computer to run. In my i3 laptop i have a total of 4 threads. If i use 4 of them i cant use my computer for anything else as it is too laggy but this way i mine the most of it. If i use 2 threads then i dont have a problem and i mine as i use my computer. Your computer may have more threads. Put the number of your threads according to your CPU
*You dont need a PASSWORD for those pools. Let it as is and it should work.
Now all you need to do is to save this .bat file you made and close it. Then just run it buy double clicking it and you have started mining!

For Linux: (I have tried it on Ubuntu 13.10 and 13.04 and Debian 7) On the terminal put the following:

sudo apt-get update  
sudo apt-get install yasm -y git make g++ build-essential libminiupnpc-dev    (and press enter)
sudo apt-get install -y libboost-all-dev libdb++-dev libgmp-dev libssl-dev dos2unix (and press enter)
git clone https://github.com/thbaumbach/primecoin (and press enter)
cd primecoin/src (and press enter)
make -f makefile.unix and enter (this will take a few minutes)

And then you only have to write this and enter and you are already mining!:
For first pool:

./primeminer -pooluser=DQsoZjorSHBXDUhVkYn7VuSfzG2RfYLpuy -poolpassword=PASSWORD -poolip=dtc.xpool.xram.co -poolport=1335 -poolshare=6 -genproclimit=4

For second pool:

./primeminer -pooluser=DQsoZjorSHBXDUhVkYn7VuSfzG2RfYLpuy -poolpassword=PASSWORD -poolip=162.243.41.59 -poolport=8336 -poolshare=6 -genproclimit=4


*See above in the Windows section what you have to change for the red colors


I hope this guide will help you with mining Datacoins. I will try to make this guide even better as it may have mistakes as of now. Feel free to ask anything! I will try to help you as much as i can.

And one more thing. Dont sell you Datacoins fast! Right now price is undervalued. 1 Datacoin will sure be above 1 dollar at least. Gather some Datacoins first, see how market works and then exchange

Donations accepted: DCwREZSt175ec2fkZn5ucrJ7s4fx1ki6z7

Thanks a ton for posting this!  I feel kinda spiffy, set up yesterday and have finally earned my first shiny new Datacoin.   The joys of traveling for business and free hotel electricity.

I see it as a problem that only few people know how to do it. Is there any idea behind this secrecy? Why its not like that for scrypt based coins?

I dont think it is as easy as you think and it is clearly not as easy as pools for all the scrypt coins. The reason is that as a primecoin fork only a few people right now know how  to make a pool. Its totally different algorithm. But i am not really familiar with how pools work anyway to help

As soon as I saw your address in there, I knew it was going to happen.

Thank you for your quick reply.
Yes, I know its slightly offtopic I would like to know how to set up a pool for datacoin, like pushpool or alike. Is there any ready to use software/source code?

o.O ? What do you mean? A guide for making a pool? You are either confused or i dont understand the question.

Someone was mining for my address. You have to change the address to yours!