Topic: Dual mining ETH + (Read 468 times)
Is it possible to mine ETH+ZIL with Phoenix miner but on Ethermine? I don't want to change pool or miner, I want to stay on Ethermine and for miner to connect to any zil pool for that minute.
I see that in eth mining the most popular offer for dual mining is eth + zil, i don't think that adding a second coin subtracts hashrate from mining the first (eth) but it's just a bonus, an addition, i also see that some pools offer added mew profits (miner extractable value) which is not bad at all
Mining Ethereum + Zilliqa on Ezil pool is still very profitable and now that we are in bull season I believe that merge mining will make a come back for a while, the reason why merge mining isn't that great anymore is because of low value of the coins
Hi I mined few dcr back in 2018. I didnt open the wallet since then. I dont remember the actual balance but it was not zero for sure Now I have installed the new wallet and restored using the seed but my balance is 0. I used wallet v 1.1.3 back then. (current version is 1.6.1) Please can you tell what can be done to restore the balance?
Thanks
Thanks
dual mining will drive your gpus hotter than usual, and many fpga and asic hitting the 2nd coin, and turn to unprofitable in times
but yeah cheap electricity and mining eth only focused on memory and there is room for other compute algo to join the mining
to maximize the profit for while it lasted
but yeah cheap electricity and mining eth only focused on memory and there is room for other compute algo to join the mining
to maximize the profit for while it lasted
no mate i have no free electricity but i hope that zill will go to the moon 
i mined a sia coin in the past...
and now what coin you advise with eth?
I don't see anything that works better with Ethereum right now than ZIL, but the profit isn't that interesting, something I would consider a waste of electricity energy, but makes sense if you have free electricity in your country and now what coin you advise with eth?
yup thats what i am mining now, eth + zill,
and it made me 1$ in a day
and it made me 1$ in a day
in lolminer i couldnot mine, dont know why couldnt make a good config file that worked
yup thats what i am mining now, eth + zill,
and it made me 1$ in a day
and it made me 1$ in a day
thanks for your reply..
now i am using phoenix miner and ethermine for eth..
can you show me how to mine dcr and eth? thanks
now i am using phoenix miner and ethermine for eth..
can you show me how to mine dcr and eth? thanks
Dude, do you do something by yourself or you ask for all things? Read in the miner threads and learn how to mine.
https://bitcointalksearch.org/topic/phoenixminer-62c-fastest-ethereumethash-miner-with-lowest-devfee-winlinux-2647654
everything you must know, you can find it on the first page!!!!!!
i am asking because dont know and who knows they help me. and you if you are such a clever you dont have to be in my topic so leave.. and if you want something then send me a personal message and there we will discuss
dont off topic please.
if you kbow something then explain and write dont copy paste
Why you don't try ETH+ZIL with lolminer 1.20...
thanks for your reply..
now i am using phoenix miner and ethermine for eth..
can you show me how to mine dcr and eth? thanks
now i am using phoenix miner and ethermine for eth..
can you show me how to mine dcr and eth? thanks
Dude, do you do something by yourself or you ask for all things? Read in the miner threads and learn how to mine.
https://bitcointalksearch.org/topic/phoenixminer-62c-fastest-ethereumethash-miner-with-lowest-devfee-winlinux-2647654
everything you must know, you can find it on the first page!!!!!!
i am asking because dont know and who knows they help me. and you if you are such a clever you dont have to be in my topic so leave.. and if you want something then send me a personal message and there we will discuss
dont off topic please.
if you kbow something then explain and write dont copy paste
thanks for your reply..
now i am using phoenix miner and ethermine for eth..
can you show me how to mine dcr and eth? thanks
now i am using phoenix miner and ethermine for eth..
can you show me how to mine dcr and eth? thanks
Dude, do you do something by yourself or you ask for all things? Read in the miner threads and learn how to mine.
https://bitcointalksearch.org/topic/phoenixminer-62c-fastest-ethereumethash-miner-with-lowest-devfee-winlinux-2647654
everything you must know, you can find it on the first page!!!!!!
Dudeeee you are genious
To OP..DCR is mined now only with Asics....
Take a look at minerstat page showing what different gpu will earn per day on DCR.
https://minerstat.com/hardware/gpus?algo=Blake%20(14r)
Change your power cost to 0...and you still earn 0 per day...because even the best GPUS only get like 6ghs.....(and that is only mining DCR...it goes down when dual mining). Even whattomine.com shows 6ghs earns 0 dcr....
A single Asic for DCR does over 50THS on DCR. 50THS is 50,000GHS...and your gpu will not even compete...like trying to mine BTC with GPU...somethings just dont work.
Take a look at minerstat page showing what different gpu will earn per day on DCR.
https://minerstat.com/hardware/gpus?algo=Blake%20(14r)
Change your power cost to 0...and you still earn 0 per day...because even the best GPUS only get like 6ghs.....(and that is only mining DCR...it goes down when dual mining). Even whattomine.com shows 6ghs earns 0 dcr....
A single Asic for DCR does over 50THS on DCR. 50THS is 50,000GHS...and your gpu will not even compete...like trying to mine BTC with GPU...somethings just dont work.
thanks for your reply..
now i am using phoenix miner and ethermine for eth..
can you show me how to mine dcr and eth? thanks
now i am using phoenix miner and ethermine for eth..
can you show me how to mine dcr and eth? thanks
Dude, do you do something by yourself or you ask for all things? Read in the miner threads and learn how to mine.
https://bitcointalksearch.org/topic/phoenixminer-62c-fastest-ethereumethash-miner-with-lowest-devfee-winlinux-2647654
everything you must know, you can find it on the first page!!!!!!
thanks for your reply..
now i am using phoenix miner and ethermine for eth..
can you show me how to mine dcr and eth? thanks
now i am using phoenix miner and ethermine for eth..
can you show me how to mine dcr and eth? thanks
i mined a sia coin in the past...
and now what coin you advise with eth?
and now what coin you advise with eth?
Based on my mining experience during the last 3 years and the electricity price costs where I live, we have stopped 'dual mining' long time ago. We were mining decred + eth but it was not profitable on any cases. I suppose that for these people who has no electricity costs associated, it is a very nice option because the eth mh/s are quite similar when you are doing 'dual mining' comparing with 'only eth mining'.
In case you have no electrocoty costs and it is profitable for you, I recommend you move forward with eth+ DCR. Good luck!
Zilliqa and decred still allows dual mining but it's been long since I see this working and after looking into popular crypto calculators I see that dual mining isn't Profitable for now, mining Ethereum only will do you right than dual mining with other coins, mining ETH with ZIL will hurt the ETH ROI
I don't dual mine anymore because its not worth it anymore unlike few years back, you will be wasting electricity for nothing, but if you can find good mining calculator sometimes dual mining will be profitable and sometimes it won't, in 2017 it's more stable to do dual mining
Its becuase zil isnt mined at all time the rig is running. Zil is only being mined for a minute ever hour or two.
Based on my calculations it costs ETH profits to mie Zil.
Based on my calculations it costs ETH profits to mie Zil.
everything is ok,
i have confugered on 3 rig
1) rx580 3x - eth hash (80mhs)
2) asus 1070 6x - eth hash (180mhs)
3) asus 1070 6x - eth hash (180mhs)
i am mining eth on ethermine and zilla on ruspool..
on rustpool it says that i have a 400mhs and all 3 workers are making 15, 17, 17 shares
i have a question why there is no difference between my (80mhs) rig and (180mhs) rig? why are they making almost same shares.. do i have to add something to my bat file in config?
i have a same bat file on 3 rigs and i think that i have to add or change some command to my 180mhs rigs to get more shares for zilla.. here is my config file:
Phoenixminer.exe -epool eu-zill.rustpool.xyz:8008 -ewal (myethadress) -epsw (myzilladress)@eu1.ethermine.org:4444@4g -eworker (myusername) -allpools 1 -allcoins 1
and here is the creens of my 180mhs rigs and there is said maximum eth difficulty are differents
https://ibb.co/0QW6Dbq
https://ibb.co/W3d8StN
i have confugered on 3 rig
1) rx580 3x - eth hash (80mhs)
2) asus 1070 6x - eth hash (180mhs)
3) asus 1070 6x - eth hash (180mhs)
i am mining eth on ethermine and zilla on ruspool..
on rustpool it says that i have a 400mhs and all 3 workers are making 15, 17, 17 shares
i have a question why there is no difference between my (80mhs) rig and (180mhs) rig? why are they making almost same shares.. do i have to add something to my bat file in config?
i have a same bat file on 3 rigs and i think that i have to add or change some command to my 180mhs rigs to get more shares for zilla.. here is my config file:
Phoenixminer.exe -epool eu-zill.rustpool.xyz:8008 -ewal (myethadress) -epsw (myzilladress)@eu1.ethermine.org:4444@4g -eworker (myusername) -allpools 1 -allcoins 1
and here is the creens of my 180mhs rigs and there is said maximum eth difficulty are differents
https://ibb.co/0QW6Dbq
https://ibb.co/W3d8StN
Jump to: