Pages:
Author

Topic: Ebit e9 miner with 6.8Th/s from Ebang company a new rival for existing producers - page 31. (Read 80738 times)

legendary
Activity: 1498
Merit: 1030
Only 205 watts per connector - well within the connector specs, doesn't push them anywhere near as hard as the SP20 (which was NOT known for melting connectors as a widespread thing, unlike a couple of the KNC models that wanted to push 300+ watts through them).

legendary
Activity: 1050
Merit: 1000
This is their webpage http://miner.ebang.com.cn/en/index.html

These are the specs.
Ebit E9 Miner Parameters

Ideal hash rate:  6.3TH/S(-2%~+10%)
Power consumption ratio on wall:140W/T(-10%~+15%,AC/DC 93%efficiency,25℃ ambient temperature)
Rated voltage:   11.8V~13.0V
Chip Info.:   DW1227 96pcs(14nm LPP process)      
Power interface:   4*6PIN port
Dimensions:   290mm*126mm*155mm
Weight:   4.2KG
Network connection:   Ethernet
Operating temperature:   -10℃~40℃
Working humidity:   5%RH~95%RH (non condensing)


Yah, dunno seen a lot of vaporware scams popping up.
This has been discussed I believe the power draw over the number of plugs screams fake or fire hazard.
newbie
Activity: 15
Merit: 0
This is their webpage http://miner.ebang.com.cn/en/index.html

These are the specs.
Ebit E9 Miner Parameters

Ideal hash rate:  6.3TH/S(-2%~+10%)
Power consumption ratio on wall:140W/T(-10%~+15%,AC/DC 93%efficiency,25℃ ambient temperature)
Rated voltage:   11.8V~13.0V
Chip Info.:   DW1227 96pcs(14nm LPP process)     
Power interface:   4*6PIN port
Dimensions:   290mm*126mm*155mm
Weight:   4.2KG
Network connection:   Ethernet
Operating temperature:   -10℃~40℃
Working humidity:   5%RH~95%RH (non condensing)
Pages:
Jump to: