Topic: [EDU] EDUCOIN - Learning is Earning - page 14. (Read 19558 times)
Any bounty program?
What will be done with the unclaimed coins from the swap?
This is laid out in detail in the white paper, however the quick and dirty version is as follows 50% will be used for internal matters Development (15%) / Airdrops (15%) / paid marketing (10%) / bounties (10%)
The other 50% of the unclaimed coins will distributed throughout the community at the end of each year at a rate of 10% per airdrop until there is nothing left of the unclaimed coins.
Nice algorithm, for the time being I will happily mining this coin. The project is really interesting and has a future. I'm waiting for news and good luck to the team.
Thank you! We had considered releasing an ERC20 token however with the mass influx of ICO's and our passion for good home grown mining. We felt this was a better decision.
Also mining is still, as of now, an integral part of crypto!
I think it's better not to rush. The first thing we need to do is make sure the network is stable.
And fast exchange rarely leads to something good. Everything has its time
This is 100% something we are thinking about. Obviously we could easily just throw a coin up on YoBit and get things moving however we are constantly thinking about what our actions convey to the community. We are trying to create something that is MORE than just a coin.
Nice algorithm, for the time being I will happily mining this coin. The project is really interesting and has a future. I'm waiting for news and good luck to the team.
Thank you! We had considered releasing an ERC20 token however with the mass influx of ICO's and our passion for good home grown mining. We felt this was a better decision.
Also mining is still, as of now, an integral part of crypto!
I think it's better not to rush. The first thing we need to do is make sure the network is stable.
And fast exchange rarely leads to something good. Everything has its time
What will be done with the unclaimed coins from the swap?
Nice algorithm, for the time being I will happily mining this coin. The project is really interesting and has a future. I'm waiting for news and good luck to the team.
Thank you! We had considered releasing an ERC20 token however with the mass influx of ICO's and our passion for good home grown mining. We felt this was a better decision.
Also mining is still, as of now, an integral part of crypto!
Nice algorithm, for the time being I will happily mining this coin. The project is really interesting and has a future. I'm waiting for news and good luck to the team.
Thank you! We had considered releasing an ERC20 token however with the mass influx of ICO's and our passion for good home grown mining. We felt this was a better decision.
Also mining is still, as of now, an integral part of crypto!
8% annual return
you must be kidding me...
without product, infrastructure, customer..
another weird project
you must be kidding me...
without product, infrastructure, customer..
another weird project
Our product line is currently in development! Check back soon. There will be updates.
sure please let me know if there is any new update
We have partnered with a nationally known educational firm to help write some crypto based educational materials. They know education we (the community) know crypto. Together we hope to be able to make something that is tangible! Updates soon!
Nice algorithm, for the time being I will happily mining this coin. The project is really interesting and has a future. I'm waiting for news and good luck to the team.
8% annual return
you must be kidding me...
without product, infrastructure, customer..
another weird project
you must be kidding me...
without product, infrastructure, customer..
another weird project
Our product line is currently in development! Check back soon. There will be updates.
sure please let me know if there is any new update
ex: my ip is: 192.168.1.10 , so it's rpcallowip=192.168.1.*
Try it.
I've updated the ANN thread, try this :
Solo Mining Details:
create file EduCoin.conf in C:\Users\%USERNAME%\AppData\Roaming\EduCoin
rpcuser=YOURUSERNAME
rpcpassword=YOURPASSWORD
rpcallowip=127.0.0.1
rpcport=17388
port=17389
daemon=1
server=1
listen=1
Configure your bat using the following:
-o http://127.0.0.1:17388 -u YOURUSERNAME -p YOURPASSWORD
Then with your wallet running, run your Miner.bat
ccminer-x64 -k keccak -o http://127.0.0.1:17389 -u aa -p bb
conf:
rpcuser=aa
rpcpassword=bb
rpcallowip=127.0.0.1
rpcport=17388
port=17389
daemon=1
server=1
listen=1
and now it show
NVML GPU monitoring enabled
NVAPI GPU monitoring enabled
1 miner thread started ,using 'auto' algorithm
auto block 1790,diff 514.82,net 50.25GH/s
and still now nothing happen .
it works?or ,
You're using the wrong port on your miner bat file.
Change the 127.0.0.1:17389 to 127.0.0.1:17388.
i change the port
now it show
NVML GPU monitoring enabled
NVAPI GPU monitoring enabled
1 miner thread started ,using 'auto' algorithm
auto block 2128,diff 542.66,net 46.61GH/s
i want to know ,donot need to put the wallet address to bat ? just strat the wallet ? and do not need to ope. anything in wallet ?
8% annual return
you must be kidding me...
without product, infrastructure, customer..
another weird project
you must be kidding me...
without product, infrastructure, customer..
another weird project
Our product line is currently in development! Check back soon. There will be updates.
ex: my ip is: 192.168.1.10 , so it's rpcallowip=192.168.1.*
Try it.
I've updated the ANN thread, try this :
Solo Mining Details:
create file EduCoin.conf in C:\Users\%USERNAME%\AppData\Roaming\EduCoin
rpcuser=YOURUSERNAME
rpcpassword=YOURPASSWORD
rpcallowip=127.0.0.1
rpcport=17388
port=17389
daemon=1
server=1
listen=1
Configure your bat using the following:
-o http://127.0.0.1:17388 -u YOURUSERNAME -p YOURPASSWORD
Then with your wallet running, run your Miner.bat
ccminer-x64 -k keccak -o http://127.0.0.1:17389 -u aa -p bb
conf:
rpcuser=aa
rpcpassword=bb
rpcallowip=127.0.0.1
rpcport=17388
port=17389
daemon=1
server=1
listen=1
and now it show
NVML GPU monitoring enabled
NVAPI GPU monitoring enabled
1 miner thread started ,using 'auto' algorithm
auto block 1790,diff 514.82,net 50.25GH/s
and still now nothing happen .
it works?or ,
You're using the wrong port on your miner bat file.
Change the 127.0.0.1:17389 to 127.0.0.1:17388.
solo mining is difficult with this nethash. When will be a pool ready for mining?
maybe it has some mistakes in code, pool don't count blocks although client found blocks, some reports above and devs ignore it with their silent. 
let them have some time and comeback later ex: my ip is: 192.168.1.10 , so it's rpcallowip=192.168.1.*
Try it.
I've updated the ANN thread, try this :
Solo Mining Details:
create file EduCoin.conf in C:\Users\%USERNAME%\AppData\Roaming\EduCoin
rpcuser=YOURUSERNAME
rpcpassword=YOURPASSWORD
rpcallowip=127.0.0.1
rpcport=17388
port=17389
daemon=1
server=1
listen=1
Configure your bat using the following:
-o http://127.0.0.1:17388 -u YOURUSERNAME -p YOURPASSWORD
Then with your wallet running, run your Miner.bat
ccminer-x64 -k keccak -o http://127.0.0.1:17389 -u aa -p bb
conf:
rpcuser=aa
rpcpassword=bb
rpcallowip=127.0.0.1
rpcport=17388
port=17389
daemon=1
server=1
listen=1
and now it show
NVML GPU monitoring enabled
NVAPI GPU monitoring enabled
1 miner thread started ,using 'auto' algorithm
auto block 1790,diff 514.82,net 50.25GH/s
and still now nothing happen .
it works?or ,
8% annual return
you must be kidding me...
without product, infrastructure, customer..
another weird project
you must be kidding me...
without product, infrastructure, customer..
another weird project
ex: my ip is: 192.168.1.10 , so it's rpcallowip=192.168.1.*
Try it.
I've updated the ANN thread, try this :
Solo Mining Details:
create file EduCoin.conf in C:\Users\%USERNAME%\AppData\Roaming\EduCoin
rpcuser=YOURUSERNAME
rpcpassword=YOURPASSWORD
rpcallowip=127.0.0.1
rpcport=17388
port=17389
daemon=1
server=1
listen=1
Miner.bat:
-o http://127.0.0.1:17388 -u YOURUSERNAME -p YOURPASSWORD
Then with your wallet running, run your Miner.bat
hello dev, could you please teach me how can i delete the blank transactions, it's very uncomfortable to see.
solo mining is difficult with this nethash. When will be a pool ready for mining?
maybe it has some mistakes in code, pool don't count blocks although client found blocks, some reports above and devs ignore it with their silent. The Keccak from Maxcoin appears to need a specific configuration in order or work properly.
ex: my ip is: 192.168.1.10 , so it's rpcallowip=192.168.1.*
Try it.
I've updated the ANN thread, try this :
Solo Mining Details:
create file EduCoin.conf in C:\Users\%USERNAME%\AppData\Roaming\EduCoin
rpcuser=YOURUSERNAME
rpcpassword=YOURPASSWORD
rpcallowip=127.0.0.1
rpcport=17388
port=17389
daemon=1
server=1
listen=1
Configure your bat using the following:
-o http://127.0.0.1:17388 -u YOURUSERNAME -p YOURPASSWORD
Then with your wallet running, run your Miner.bat
attached my *bat
ccminer-x64 -k keccak -o
http://127.0.0.1_ERGt5JUZhNoamEQMnj3ufK1sins8Eu8v1S_opend:17389 -u
aa -p bb
and
listen=1
server=1
daemon=1
setgenerate=true
maxconnections=250
rpcuser=aa
rpcpassword=bb
port=17388
rpcport=17389
rpcconnect=127.0.0.1
rpcallowip=127.0.0.1
rpcallowip=192.168.2.138
why can not sole , it show
http request failed : could not resolve host:127.0.0.1
can you show me how to sole , your bat . because i really want this coin
have a nice day .
rpcallowip=192.168.2.138 must be 192.168.2.*ccminer-x64 -k keccak -o
http://127.0.0.1_ERGt5JUZhNoamEQMnj3ufK1sins8Eu8v1S_opend:17389 -u
aa -p bb
and
listen=1
server=1
daemon=1
setgenerate=true
maxconnections=250
rpcuser=aa
rpcpassword=bb
port=17388
rpcport=17389
rpcconnect=127.0.0.1
rpcallowip=127.0.0.1
rpcallowip=192.168.2.138
why can not sole , it show
http request failed : could not resolve host:127.0.0.1
can you show me how to sole , your bat . because i really want this coin
have a nice day .
ex: my ip is: 192.168.1.10 , so it's rpcallowip=192.168.1.*
Try it.
Jump to: