Efudd Z-Series Fuddware 2.3 -Z11/Z11e/Z11j/Z9/Mini - page 5.

efudd

member

Activity: 504

Merit: 51

Quote from: ValeriB on June 24, 2019, 07:54:22 AM

For two nights in a row did my Z9 mine ZEC for Roskomnadzor? Or did Roskomnadzor block my miner and make him work on your wallet? Uncle is you. And yes, I am from Russia. I have nothing more to do here. Farewell.

For someone who doesn’t want help, you sure are insistent.

Again, cannot guess without any data. This is nothing but conjecture.

-j

ValeriB

newbie

Activity: 8

Merit: 0

For two nights in a row did my Z9 mine ZEC for Roskomnadzor? Or did Roskomnadzor block my miner and make him work on your wallet? Uncle is you. And yes, I am from Russia. I have nothing more to do here. Farewell.

efudd

member

Activity: 504

Merit: 51

Quote from: ValeriB on June 24, 2019, 07:04:45 AM

I did not think that you are cooperating with Roskomnadzor. Why do other firmware work for the owners of the equipment, and not for the uncle?

No clue and I don’t know what “uncle” you mean. You have provided literally 0 information, just conjecture and speculation would be ignorant on my part.

Please move along to another firmware as it is blocked by Roskomnadzor and you are clearly in Russian territories.

-j

ValeriB

newbie

Activity: 8

Merit: 0

I did not think that you are cooperating with Roskomnadzor. Why do other firmware work for the owners of the equipment, and not for the uncle?

efudd

member

Activity: 504

Merit: 51

Quote from: chertoyanov on June 24, 2019, 04:37:06 AM

Quote from: ValeriB on June 24, 2019, 02:45:56 AM

Hello. Read the whole topic. My Z9 also works for many hours on the developer firmware. And it happens mostly at night, when I can not control it. My Z9 works on Flypool. But many people have different pools and everywhere the same problem. This problem is not in the pool and not in the miners, this problem is in the wonderful firmware !!! As soon as I reflashed my z9 on Antminer-Z9-DEFAULT-500-DUAL-MODE-201808280957-unlocked.tar everything worked just perfect! The hashrate curve on the pool has turned into a straight line at the level of 60 K/sol. Good luck to all.

The same for me. I am trying many setting, but the result is the as described above. Restarting the device is the only way to restore its normal operation. Below is the graph of the work of the rig, composed of two Z9 and one Z9 mini. The Z9 working with your firmware, and Z9mini is witn stock firmware. The problem appears incidently in about 24 or 36 hours. The problem occurs regardless of the pool used.
Devices shows that they are working at maximum speed, but the pool shows that they either operate at a slower speed or that there are no shares at all.

Helllo first post! Send your support ID from the status page. Your wording is very similar to the last person. Curious as heck!

I welcome you to use another firmware until you can actually provide the supportID and we can work through your logs.

EVERY one of those types of things that has come up has had an explanation and a resolution. Almost EVERY time it is externally caused.

If you are “trying multiple settings”, each time a setting is tried, cgminer restarts... it sure would not leave a single multi-hour gap that shows 0 hash rate. Wait... you said one was on stock and that graph was combined. So which is it?

What version of my firmware are you using?

The Z9 firmware has been installed and running a long darned time at customer sites and large installations. My oldest users are at almost 9 months with no problems.

If you are in Russia, this will not work with Roskomnadzor and I encourage you to use something else.

Vladivostok - api.fudd.net Not Working in Russia.

-j

chertoyanov

newbie

Activity: 5

Merit: 0

Quote from: ValeriB on June 24, 2019, 02:45:56 AM

Hello. Read the whole topic. My Z9 also works for many hours on the developer firmware. And it happens mostly at night, when I can not control it. My Z9 works on Flypool. But many people have different pools and everywhere the same problem. This problem is not in the pool and not in the miners, this problem is in the wonderful firmware !!! As soon as I reflashed my z9 on Antminer-Z9-DEFAULT-500-DUAL-MODE-201808280957-unlocked.tar everything worked just perfect! The hashrate curve on the pool has turned into a straight line at the level of 60 K/sol. Good luck to all.

The same for me. I am trying many setting, but the result is the as described above. Restarting the device is the only way to restore its normal operation. Below is the graph of the work of the rig, composed of two Z9 and one Z9 mini. The Z9 working with your firmware, and Z9mini is witn stock firmware. The problem appears incidently in about 24 or 36 hours. The problem occurs regardless of the pool used.
Devices shows that they are working at maximum speed, but the pool shows that they either operate at a slower speed or that there are no shares at all.

https://i.imgur.com/F4D0RPU.gif

ValeriB

newbie

Activity: 8

Merit: 0

Frequency 675 Mhz, Temp. 63-67-65. 60 K\sol.

efudd

member

Activity: 504

Merit: 51

Quote from: ValeriB on June 24, 2019, 03:25:43 AM

Sorry if I'm wrong. If your clients are satisfied, then there is no problem. Bat I will stay on the free firmware. Good luck .

I'd welcome feedback on your experiences with that particular firmware. I've had multiple farms switch over to my stuff who ended up running into issues with stability with that one. The instability manifested in a number of ways, some of which might have been environmental. Simultaneously, I know of a few users who do not have any problems with it.

What I can state for certain is my goal is for the firmware to operate exactly as described, and nothing else. I expect users to be happy with their results and encourage feedback and partnership to resolve any inconsistency between their expectation and their experience.

*shrug* -- my firmware provides more than overclock, it also provides good customer service.

-j

ValeriB

newbie

Activity: 8

Merit: 0

Sorry if I'm wrong. If your clients are satisfied, then there is no problem. But I will stay on the free firmware. Good luck .

efudd

member

Activity: 504

Merit: 51

Quote from: ValeriB on June 24, 2019, 03:08:59 AM

#823. #861.

823 - issue was caused by ARRR going offline on the luxor US server. Users were encouraged to move to the EU server while it was resolved and was successful. The core of the problem was when payments were being processed in the ARRR daemon, new work could not be generated resulting in miners going offline. This in turn caused cgminer to fail over to any available pool. This is a long standing bug in the underlying daemon and has been raised to the dev team to be resolved.

861 - Older customer, had been running firmware for many months. Configuration issue specific to user, was resolved.

-j

ValeriB

newbie

Activity: 8

Merit: 0

#823. #861.

efudd

member

Activity: 504

Merit: 51

Quote from: ValeriB on June 24, 2019, 02:58:43 AM

The language barrier does not interfere with understanding the meaning of the messages of other users. I don’t need help anymore, thanks. 3% is not 8 - 10 hours of equipment work per day for another uncle.

If this is happening for your "uncle", I apologize. ~~I have actually just disabled all dev fees to analyze logs and see if the possibility of what you state is true.~~

-j

efudd

member

Activity: 504

Merit: 51

Quote from: ValeriB on June 24, 2019, 02:58:43 AM

The language barrier does not interfere with understanding the meaning of the messages of other users. I don’t need help anymore, thanks.

Good luck!

-j

ValeriB

newbie

Activity: 8

Merit: 0

The language barrier does not interfere with understanding the meaning of the messages of other users. I don’t need help anymore, thanks. 3% is not 8 - 10 hours of equipment work per day for another uncle.

efudd

member

Activity: 504

Merit: 51

Quote from: ValeriB on June 24, 2019, 02:45:56 AM

Hello. Read the whole topic. My Z9 also works for many hours on the developer firmware. And it happens mostly at night, when I can not control it. My Z9 works on Flypool. But many people have different pools and everywhere the same problem. This problem is not in the pool and not in the miners, this problem is in the wonderful firmware !!! As soon as I reflashed my z9 on Antminer-Z9-DEFAULT-500-DUAL-MODE-201808280957-unlocked.tar everything worked just perfect! The hashrate curve on the pool has turned into a straight line at the level of 60 K\sol. Good luck to all.

Um, the firmware has a dev-fee built in, 3% which strongly suggests you didn't read the whole topic or there is a language barrier confusion. I welcome you to point out the "many people.. everywhere same problem" with real data and not conjecture, also.

100% positive that is what you are seeing.

I responded 4 minutes after you posted this, which strongly suggests I'm readily available to work with you on any issues you might be having. Please PM me support ID from status page, otherwise and I'll be happy to help figure out whatever it is you have going on.

-j

ValeriB

newbie

Activity: 8

Merit: 0

Hello. Read the whole topic. My Z9 also works for many hours on the developer firmware. And it happens mostly at night, when I can not control it. My Z9 works on Flypool. But many people have different pools and everywhere the same problem. This problem is not in the pool and not in the miners, this problem is in the wonderful firmware !!! As soon as I reflashed my z9 on Antminer-Z9-DEFAULT-500-DUAL-MODE-201808280957-unlocked.tar everything worked just perfect! The hashrate curve on the pool has turned into a straight line at the level of 60 K/sol. Good luck to all.

efudd

member

Activity: 504

Merit: 51

Quote from: ?? on ??

Quote from: efudd on June 22, 2019, 10:29:37 AM

Quote from: tps_star on June 22, 2019, 10:20:51 AM

thancks for answer
if i use frequency 760 i get how ksol ?
and my chip temp is higher than orginal firmware ?

Join discord to live discuss, easier.

Temps will be higher any time you increase frequency+voltage.

These Z11 need additional voltage in order to increase hashrate, so increased temps are basically a given.

-j

may you share discord channel to join? have some questions about tune z9 mini and z11

https://discord.gg/T5g69zq

-j

efudd

member

Activity: 504

Merit: 51

Quote from: tps_star on June 22, 2019, 10:20:51 AM

thancks for answer
if i use frequency 760 i get how ksol ?
and my chip temp is higher than orginal firmware ?

Join discord to live discuss, easier.

Temps will be higher any time you increase frequency+voltage.

These Z11 need additional voltage in order to increase hashrate, so increased temps are basically a given.

-j

efudd

member

Activity: 504

Merit: 51

Quote from: ExEric3 on June 22, 2019, 07:31:17 AM

Is that fan issue fixed?

No, not at this time. The long and short of it is validation requires needing the ability to actually see/hear the fans during the testing (reading RPMs is not enough for a couple of reasons).

I have what I need to fix it (I think.. goes back to needing to test), just not validate it.

-j

efudd

member

Activity: 504

Merit: 51

Quote from: FFI2013 on June 22, 2019, 07:27:19 AM

Do three over clocked z9 minis compare power and rates to a z9 just wondering because people are asking high amounts for z9s

My *personal* math was 1Z9=4Mini when OC’d. It’s the fact that the Z9s came in and prevented me from getting 60k out of that that created the firmware to begin with.

The power:hash for mini and z9 are comparable as best my memory provides.

-j

Topic: Efudd Z-Series Fuddware 2.3 -Z11/Z11e/Z11j/Z9/Mini - page 5. (Read 45460 times)