Topic: Electroneum FAILS dk2an0 failed -4 (Read 282 times)

castxmr now is working with each speed 720 to 750 h/s  last 1 hour without problem.I hope will work like to so forever.
i am using electroneum.com wallet but look like nothing come out to wallet yet 

i think start working now with castxmr little bit and gone again 


[13:44:21] GPU0 Found Nonce, submitting...
[13:44:22] Share Accepted -> +1
[13:44:22] Shares: 1 Accepted, 0 Errors | Hash Rate Avg: 4964.8 H/s | Avg Search Time: 0.0 sec
[13:44:23] GPU0 | 43°C | Fan 2813 RPM | 720.9 H/s
[13:44:23] GPU6 | 28°C | Fan 2777 RPM | 729.4 H/s
[13:44:23] GPU1 | 44°C | Fan 2618 RPM | 728.0 H/s
[13:44:24] GPU3 | 44°C | Fan 2761 RPM | 752.1 H/s
[13:44:24] GPU2 | 43°C | Fan 2783 RPM | 748.5 H/s
[13:44:25] GPU5 | 46°C | Fan 2830 RPM | 752.6 H/s
[13:44:25] GPU4 | 40°C | Fan 2815 RPM | 750.7 H/s
[13:44:27] GPU6 | 28°C | Fan 2774 RPM | 727.1 H/s
[13:44:27] GPU0 | 43°C | Fan 2814 RPM | 721.0 H/s
[13:44:27] GPU1 | 45°C | Fan 2612 RPM | 726.1 H/s
[13:44:28] GPU3 | 44°C | Fan 2757 RPM | 749.8 H/s
[13:44:28] GPU2 | 43°C | Fan 2787 RPM | 748.0 H/s
[13:44:29] GPU5 | 46°C | Fan 2821 RPM | 750.9 H/s
[13:44:29] GPU4 | 40°C | Fan 2820 RPM | 749.1 H/s
[13:44:31] GPU6 | 28°C | Fan 2775 RPM | 726.9 H/s
[13:44:31] GPU0 | 44°C | Fan 2814 RPM | 719.8 H/s
[13:44:31] GPU1 | 45°C | Fan 2624 RPM | 722.9 H/s
[13:44:32] GPU3 | 45°C | Fan 2757 RPM | 749.4 H/s
[13:44:32] GPU2 | 44°C | Fan 2770 RPM | 749.3 H/s
[13:44:33] GPU5 | 46°C | Fan 2821 RPM | 749.8 H/s
[13:44:33] GPU4 | 40°C | Fan 2820 RPM | 748.0 H/s
[13:44:39] GPU6 | 28°C | Fan 2772 RPM | 725.2 H/s
[13:44:39] GPU1 | 45°C | Fan 2624 RPM | 722.4 H/s
[13:44:39] GPU0 | 44°C | Fan 2813 RPM | 719.5 H/s
[13:44:39] GPU3 | 45°C | Fan 2761 RPM | 748.5 H/s
[13:44:39] GPU2 | 44°C | Fan 2787 RPM | 746.1 H/s
[13:44:39] GPU5 | 47°C | Fan 2826 RPM | 749.3 H/s
[13:44:39] GPU4 | 40°C | Fan 2820 RPM | 747.2 H/s
Caught signal 2
quitting... GPU stopped... done.Terminate batch job (Y/N)?

i have 8gb memory

and virtual memory is min 8192 and max 16384 i setup before.

Hey.

Have you set virtual memory to 16gb atleast in windows?

How to: http://www.tomshardware.co.uk/faq/id-2864547/manage-virtual-memory-pagefile-windows.html


Also try xmr stak  and see if it works.

https://bitcointalksearch.org/topic/xmr-stak-miner-220-with-colorscheme-inline-shares-total-hasrate-0-dev-fee-2783886

PU4, OpenCL error -4 (0) - cannot create DAG on GPU
GPU3, OpenCL error -4 (0) - cannot create DAG on GPU
GPU6, OpenCL error -4 (0) - cannot create DAG on GPU
GPU1, OpenCL error -4 (0) - cannot create DAG on GPU
GPU0, OpenCL error -4 (0) - cannot create DAG on GP

this software giving dk2an0 error on me can u able to share code with me please? i tired with claymore v10

thanks

I had the same problem, now I'm using NsGpuCNMiner. Working good and fast.

12:02:59] Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.
[12:02:59] Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0

now giving this error.

my telegram is : @ismaililgin

Thanks

Hello i am mining with gateless gate miner its better miner give +30 h/s per cards.
Pm me with your telegram and i help you setup your rig

no i am using windows 10 for both rigs.

Also i dont know how to delete opencl 

For castxmr, you have to use win8 and higher...

Just one question. Are you using windows7?

So,
Try to delete opencl. It should by there automatic detection.

Now i did like bellow but same error comes up


cast_xmr-vega --help
cast_xmr-vega -S pool.electroneum.space:7777 -u etnjzNf5525eAmB3sTPgo8ja4MWwLP4ks8K9tVHX76WRXca8HPFq63GjmQmpmpejh4LKTmAAPzEw8UW 755n1hSTY6GpYWbVvXt -p x %* --opencl 0 -G 0,1,2,3,4,5,6 --fastjobswitch

Hi,
the parameter -G must be according to the each gpu.  So it will be (if you have 7gpus) -G 0,1,2,3,4,5,6
And for opencl just leave 0 for the first time.
And write what happend.

i did like that but no luck


cast_xmr-vega --help
cast_xmr-vega -S pool.electroneum.space:7777 -u etnjzNf5525eAmB3sTPgo8ja4MWwLP4ks8K9tVHX76WRXca8HPFq63GjmQmpmpejh4LKTmAAPzEw8UW 755n1hSTY6GpYWbVvXt -p x %* --opencl 1 -G 7 --fastjobswitch

https://s14.postimg.org/6ofsmbb35/error_etn.png

cast_xmr-vega --help
cast_xmr-vega -S pool.electroneum.space:7777 -u yourWallet -p x %* --opencl 0 -G 7 --fastjobswitch


so like that can be work is it? i have 7 gpu its working now.  for opencl where i will find this info from?

Thanks

I am forgot to mention that you can choose pool which one you want, just change this address inside the run file:
pool.electroneum.space:7777

Hi,
Yes, there are only two files. One is a miner itself and other one is your config.
Just put in to the run file something like this:

cast_xmr-vega --help
cast_xmr-vega -S pool.electroneum.space:7777 -u yourWallet -p x %* --opencl 0 -G 0,1,2,3,4,5,6,7 --fastjobswitch

Opencl you have to find which one is it. It could be 0 1 2 3 and so on...
-G parameter and numbers are just GPUs which you want to dedicated for the mining.

i download castxmr this morning but its give me only 2 file inside? didnt use this castxmr before. Any video for how to setup this?

Thanks