Topic: Email and sms sender using Claymore's remote manager (Read 2176 times)
pm me, i'll check prices and if it's possible to send it abroad from russia
only if you use hardware watchdog, like http://open-dev.ru/watchdog
wow thats a nice site , is there a USA based vendor for those ?
only if you use hardware watchdog, like http://open-dev.ru/watchdog
Code:
- Support for some hardware watchdog timers to automatically restart the computer when the computer freezes or fails, a video card
oh the fermtools dev has got a thread here already but no one has interested in it...
https://bitcointalksearch.org/topic/fermtools-for-easy-video-card-output-parameters-monitoring-and-alerting-1442723
https://bitcointalksearch.org/topic/fermtools-for-easy-video-card-output-parameters-monitoring-and-alerting-1442723
i hope so 
didn't try to emulate a problem
also the author will work on usb watchdogs support, for example like this one http://open-dev.ru/watchdog (in russian, i didn't find an english page)
didn't try to emulate a problemalso the author will work on usb watchdogs support, for example like this one http://open-dev.ru/watchdog (in russian, i didn't find an english page)
1. create a new telegram bot by using @BotFather bot and sending it /start. follow botfather's steps and get your bot token
2. input your token, bot name, your telegram nick and rig name in fermtools settings
3. add your bot to contact list and send /start. then send for example /all to get all info from your rig
in case of any error will you notified automaticaly? 2. input your token, bot name, your telegram nick and rig name in fermtools settings
3. add your bot to contact list and send /start. then send for example /all to get all info from your rig
1. create a new telegram bot by using @BotFather bot and sending it /start. follow botfather's steps and get your bot token
2. input your token, bot name, your telegram nick and rig name in fermtools settings
3. add your bot to contact list and send /start. then send for example /all to get all info from your rig
commands are /fgpu, /fmem, /lgpu, /lmem, /tgpu, /fanr, /fanp, /all
/resetoff - turns rig reset mode off (also turns automatic monitoring messages off, manual commands like /fgpu work)
/reseton - turns rig reset mode on
/resetget - get reset mode status
enable monitoring - tick a specific parameter in settings (first tab)
2. input your token, bot name, your telegram nick and rig name in fermtools settings
3. add your bot to contact list and send /start. then send for example /all to get all info from your rig
commands are /fgpu, /fmem, /lgpu, /lmem, /tgpu, /fanr, /fanp, /all
/resetoff - turns rig reset mode off (also turns automatic monitoring messages off, manual commands like /fgpu work)
/reseton - turns rig reset mode on
/resetget - get reset mode status
enable monitoring - tick a specific parameter in settings (first tab)
windows binaries can be downloaded from github https://github.com/Dimasin/fermtools/releases
yes i tested it, it can reset rigs remotely via telegram command, it can show all or some specific parameters like temps by sending commands manually or i can receive statuses if monitoring is enabled
the problem is that there is no complete manual for this tool, only the dev can explain some options
and that slot number info is veeeery cool!
that's exactly what I liked most in this, if there would be some nice and clean tutorial I'd be glad to test it, but building from scratch will take huge time I think... the problem is that there is no complete manual for this tool, only the dev can explain some options
and that slot number info is veeeery cool!
yes i tested it, it can reset rigs remotely via telegram command, it can show all or some specific parameters like temps by sending commands manually or i can receive statuses if monitoring is enabled
the problem is that there is no complete manual for this tool, only the dev can explain some options
and that slot number info is veeeery cool!
the problem is that there is no complete manual for this tool, only the dev can explain some options
and that slot number info is veeeery cool!
there is a free rig/gpu monitoring tool called fermtools https://github.com/Dimasin/fermtools
it monitors gpus (fans, temps etc), it can reset rigs and it can send emails or messages via telegram bot
if someone could upgrade this tool to monitor miners (like claymore or ccminer or whatever with api) directly, not only gpus
it monitors gpus (fans, temps etc), it can reset rigs and it can send emails or messages via telegram bot
if someone could upgrade this tool to monitor miners (like claymore or ccminer or whatever with api) directly, not only gpus
I think this is made for miners at the first place since guy who made it accepting ETH donations. What you mentioned, it can't be standalone tool that can connect to any miner (well it can but it's hard to make, if someone do make this it wont be free) but it can be connected to claymore miner same way remote manager is for example.
there is a free rig/gpu monitoring tool called fermtools https://github.com/Dimasin/fermtools
it monitors gpus (fans, temps etc), it can reset rigs and it can send emails or messages via telegram bot
if someone could upgrade this tool to monitor miners (like claymore or ccminer or whatever with api) directly, not only gpus
have you tested it ?it monitors gpus (fans, temps etc), it can reset rigs and it can send emails or messages via telegram bot
if someone could upgrade this tool to monitor miners (like claymore or ccminer or whatever with api) directly, not only gpus
It seems very interesting and I'm willing try as soon as I get to my farm, I'll post news after trying this out.
Especially I liked the part were it is possible to see on what slot is GPU connected
there is a free rig/gpu monitoring tool called fermtools https://github.com/Dimasin/fermtools
it monitors gpus (fans, temps etc), it can reset rigs and it can send emails or messages via telegram bot
if someone could upgrade this tool to monitor miners (like claymore or ccminer or whatever with api) directly, not only gpus
it monitors gpus (fans, temps etc), it can reset rigs and it can send emails or messages via telegram bot
if someone could upgrade this tool to monitor miners (like claymore or ccminer or whatever with api) directly, not only gpus
Have you done it already ?
can you share how one can do this ?
some kind of tutorial maybe ?
or you are just aware that telegram bot exists and that's it ?
share more info not links
can you share how one can do this ?
some kind of tutorial maybe ?
or you are just aware that telegram bot exists and that's it ?
share more info not links
a telegram bot could be a better solution
I'm sorry what ? You can share detailed info instead of posting meaningless posts like this!
a telegram bot could be a better solution
Perfect solution, was working this out earlier tonight with mettalmag.
Thanks for sharing mate!
Thanks for your response Thanks for sharing mate!
I hope this will make things easyer
Perfect solution, was working this out earlier tonight with mettalmag.
Thanks for sharing mate!
Thanks for sharing mate!
Jump to: