, Will keep a very close eye on this.Has a couple issues so far but heading in a good direction...
Topic: ▓ EqualCoin - EQUAL - X13 - ▓ AIRDROP COMING ▓ - page 6. (Read 10681 times)
Cool Coin , Will keep a very close eye on this.
Has a couple issues so far but heading in a good direction...
, Will keep a very close eye on this.Has a couple issues so far but heading in a good direction...
Premine ?
version" : "v1.0.0.0: Experimental",
"protocolversion" : 60013,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 295,
"timeoffset" : 0,
"moneysupply" : 100088200.00000000,
"connections" : 1,
"proxy" : "",
version" : "v1.0.0.0: Experimental",
"protocolversion" : 60013,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 295,
"timeoffset" : 0,
"moneysupply" : 100088200.00000000,
"connections" : 1,
"proxy" : "",
10% premine as stated, will be used for airdrop etc
Weird code here:
https://github.com/equalcoinproject/equalcoin/blob/master/src/main.cpp#L2272-L2298
Care to explain a bit ?
https://github.com/equalcoinproject/equalcoin/blob/master/src/main.cpp#L2272-L2298
Care to explain a bit ?
Yes sure. This part of the code is to check the true random bonus block.
The true random bonus block is calculated by the random number generated from certain bytes in the current hash. The problem is that the current hash is not known before the block is generated (thus payout determined), so the current block payout is always the standard, but if the current hack hits the bonus, then the difference between the bonus block and normal block will be paid out in the next block to the same address that got the current block. This is to avoid the big mining power from determining the bonus block and grab it (before the previous block hash is used to calculate bonus - so if you have big mining power, after a block generated, you can pre-calculate if the next one will be a bonus).
The current mechanism makes it a complete random process for bonus blocks, so no one can cheat.
Premine ?
version" : "v1.0.0.0: Experimental",
"protocolversion" : 60013,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 295,
"timeoffset" : 0,
"moneysupply" : 100088200.00000000,
"connections" : 1,
"proxy" : "",
version" : "v1.0.0.0: Experimental",
"protocolversion" : 60013,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 295,
"timeoffset" : 0,
"moneysupply" : 100088200.00000000,
"connections" : 1,
"proxy" : "",
Sorry guys, a wrong version of windows client was uploaded. Here's the right one:
https://drive.google.com/file/d/0B39tky7c1ELeRWRHbUwyZnVsRzg/view?usp=sharing
the source is correct, if you build from source it should be fine.
If you use windows client, please download the new one here, client up the config dir which is typical at C:\Users\(yourname)\AppData\Roaming\EqualCoin before starting the new client.
addnode=216.31.12.99
addnode=45.42.140.51
https://drive.google.com/file/d/0B39tky7c1ELeRWRHbUwyZnVsRzg/view?usp=sharing
the source is correct, if you build from source it should be fine.
If you use windows client, please download the new one here, client up the config dir which is typical at C:\Users\(yourname)\AppData\Roaming\EqualCoin before starting the new client.
addnode=216.31.12.99
addnode=45.42.140.51
Weird code here:
https://github.com/equalcoinproject/equalcoin/blob/master/src/main.cpp#L2272-L2298
Care to explain a bit ?
https://github.com/equalcoinproject/equalcoin/blob/master/src/main.cpp#L2272-L2298
Care to explain a bit ?
building wallet... pool up in 5min
Please contact the operators of some pools, we need one for this coin. When airdropa details will be published?
Stuck
Quote
Init nodes:
45.42.189.24
216.31.12.99
45.42.189.24
216.31.12.99
Nodes not work dev.
works for me.... try
addnode=45.42.140.51
?
Still does not work
Stuck after 10 block for me
Quote
Init nodes:
45.42.189.24
216.31.12.99
45.42.189.24
216.31.12.99
Nodes not work dev.
works for me.... try
addnode=45.42.140.51
?
Still does not work
ERROR: AcceptBlock() : missing bonus block reward tx
ERROR: ProcessBlock() : AcceptBlock FAILED
Misbehaving: 45.42.140.51:13787 (0 -> 100) DISCONNECTING
Apparently my wallet gets stuck because of the first bonus block. I presume you mined the first bonus block which is not getting through the network? I'm not sure.
ERROR: ProcessBlock() : AcceptBlock FAILED
Misbehaving: 45.42.140.51:13787 (0 -> 100) DISCONNECTING
Apparently my wallet gets stuck because of the first bonus block. I presume you mined the first bonus block which is not getting through the network? I'm not sure.
Quote
Init nodes:
45.42.189.24
216.31.12.99
45.42.189.24
216.31.12.99
Nodes not work dev.
works for me.... try
addnode=45.42.140.51
?
Sync. now
Doesn't work for me for some reason. Syncs until block #10 then disconnects.
hmmm weird...
Quote
Init nodes:
45.42.189.24
216.31.12.99
45.42.189.24
216.31.12.99
Nodes not work dev.
works for me.... try
addnode=45.42.140.51
?
Sync. now
Doesn't work for me for some reason. Syncs until block #10 then disconnects.
Quote
Init nodes:
45.42.189.24
216.31.12.99
45.42.189.24
216.31.12.99
Nodes not work dev.
works for me.... try
addnode=45.42.140.51
?
Sync. now
Quote
Init nodes:
45.42.189.24
216.31.12.99
45.42.189.24
216.31.12.99
Nodes not work dev.
works for me.... try
addnode=45.42.140.51
?
Quote
Init nodes:
45.42.189.24
216.31.12.99
45.42.189.24
216.31.12.99
Nodes not work dev.
solo mining...
dev we need pool
dev we need pool
Any pool?
Code:
___ _ ___ _ _
/ __\___ (_)_ __ / __\ |__ ___ ___| | _____ _ __
/ / / _ \| | '_ \ / / | '_ \ / _ \/ __| |/ / _ \ '__|
/ /__| (_) | | | | / /___| | | | __/ (__| < __/ |
\____/\___/|_|_| |_\____/|_| |_|\___|\___|_|\_\___|_|
v0.0.4 October 2016 | http://www.fuzzbawls.pw
-= Repository Information =-
============================================================
Number of commits: 1
Last commit date: Tue Oct 18 13:47:20 PDT 2016
Days since last commit: .01 Days
-= Build System Information =-
============================================================
Build Type: QMAKE/Makefile
Build Version: 2.0.0.2
Qt Bin: EqualCoin-qt
Daemon Bin: EqualCoind
-= Coin Specifications =-
============================================================
Coin Name: EqualCoin-
Client Version: 1.0.0.0
Client Name: /EqualCoin:1.0.0.0/
Default P2P Port: 13787
Default PRC Port: 13788
Message Start String: 0xc3 0xda 0xf1 0xfb
-= Coin Information Checks =-
============================================================
Matching P2PPORT in init documentation: [OK]
Matching RPCPORT in init documentation: [OK]
Build & Client Version Match: [!!]
-= Library Version Compliance Checks =-
============================================================
Miniupnpc v1.9 (API 14): [!!]
OpenSSL v1.0.1k+ (Strict DER Signatures): [!!]
Boost v1.58+ (boost::get): [OK]
-= Security Standards Checks =-
============================================================
Free of IRC related files: [!!]
IRC based peer fetching: [!!]
Contains signature malleability patch (PPCoin): [!!]
-= Connectivity Checks =-
============================================================
Contains unique ClientName: [OK]
Contains DNS seeder addresses: [**]
Contains Hex-Encoded seeder addresses: [!!]
Has at least ONE default connection method: [**]
Number of DNS Seeds: 2
Listing DNS Seed addresses...
* 216.31.12.38 [OK]
* 216.31.12.99 [OK]
-= OS Specific Checks =-
============================================================
Mac OS X Native Notification Support: [!!]
Mac OS X Deployment Script: [OK]
Mac OS X Application Icon: [!!]
Mac OS X Dock Icon Menu (Qt5): [!!]
Windows Installer Script: [**]
Windows Installer Header Image: [!!]
Windows Installer Logo Image: [!!]
Windows Installer Icon: [!!]
============================================================
* At least one DNS seeder addresses is improperly formatted.
* DNS Seeders should be full hostnames and not IP addresses.
* IRC based peer fetching has long since been depreciated!
* Developer should remove it and use DNS Seeding instead.
* Windows deployment script is using an incorrect name!
* Deployment build won't have the correct metadata!
* Windows deployment sript is using an incorrect version!
* Deployment build won't have the correct metadata!
Results should be manually verified and you should NOT rely
on any automated scripts (including this one) before running
or compiling any crypto wallet.
============================================================
Jump to: