Pages:
Author

Topic: [ETH] Claymore Miner Crashes on Startup - page 2. (Read 490 times)

full member
Activity: 602
Merit: 106
March 24, 2018, 03:44:09 PM
#15
What GPUs are you using?
newbie
Activity: 17
Merit: 0
March 24, 2018, 03:40:16 PM
#14
I'm currently in the setup phase of a 6 card rig, but since things haven't been working I've just been trying to get Claymore to run with only one card, so power shouldn't be an issue. That aside, my psu is 1500w. I'm only doing ETH mining, and it does the same for dual mining mode.

Sorry didn't see clearly your log file. It's clear when you describe it more. Look like you need to re-download claymore (seems you need fresh one), and turn-off you windows defender or anti-virus (if you have it), just to make sure all of Claymore file safe (not moved anywhere).

I did everything you said, including fully disabling windows defender and reinstalling Claymore but I still have the problem. Am I missing something?
newbie
Activity: 17
Merit: 0
March 24, 2018, 03:31:21 PM
#13
Which antivirus are you running?
Default Windows Defender. It doesn't seem to think Claymore is a threat though.
sr. member
Activity: 580
Merit: 253
Atheios.org
March 24, 2018, 03:11:55 PM
#12
Which antivirus are you running?
sr. member
Activity: 588
Merit: 272
⭐⭐⭐⭐⭐
March 24, 2018, 03:06:46 PM
#11
I'm currently in the setup phase of a 6 card rig, but since things haven't been working I've just been trying to get Claymore to run with only one card, so power shouldn't be an issue. That aside, my psu is 1500w. I'm only doing ETH mining, and it does the same for dual mining mode.

Sorry didn't see clearly your log file. It's clear when you describe it more. Look like you need to re-download claymore (seems you need fresh one), and turn-off you windows defender or anti-virus (if you have it), just to make sure all of Claymore file safe (not moved anywhere).
newbie
Activity: 17
Merit: 0
March 24, 2018, 02:59:13 PM
#10
First things first... Are you dual mining Dec with Eth, or Eth by itself?  If Eth by itself, add the command -mode 1 to your start file.
I'm mining ETH only, and I added the command. Nothing changed.
newbie
Activity: 17
Merit: 0
March 24, 2018, 02:47:42 PM
#9
Increase virtual memory (Pagefile) at least to 16GB, greater would be better (adjust to your storage capacity).
It is currently 16gb
-Snip-

I've checked defender and nothing is listed there. I've reinstalled my drivers. I reset my GPUs back to stock bios and oc settings.  None of them worked. At this point I'm thinking it might be a problem with the card unless there is something that I am missing.

How much your card by the way? And tell me about your PSU wattage. I suspect it's a power issue. Does this trouble just happen when you do dual mining?

I'm currently in the setup phase of a 6 card rig, but since things haven't been working I've just been trying to get Claymore to run with only one card, so power shouldn't be an issue. That aside, my psu is 1500w. I'm only doing ETH mining, and it does the same for dual mining mode.
sr. member
Activity: 588
Merit: 272
⭐⭐⭐⭐⭐
March 24, 2018, 02:36:32 PM
#8
Increase virtual memory (Pagefile) at least to 16GB, greater would be better (adjust to your storage capacity).
It is currently 16gb
-Snip-

I've checked defender and nothing is listed there. I've reinstalled my drivers. I reset my GPUs back to stock bios and oc settings.  None of them worked. At this point I'm thinking it might be a problem with the card unless there is something that I am missing.

How much your card by the way? And tell me about your PSU wattage. I suspect it's a power issue. Does this trouble just happen when you do dual mining?
newbie
Activity: 17
Merit: 0
March 24, 2018, 02:30:25 PM
#7
Increase virtual memory (Pagefile) at least to 16GB, greater would be better (adjust to your storage capacity).
It is currently 16gb

Then you can be tried what suggested by @sindikat above. Or may you can try to run your GPUs on stock setting.

I've checked defender and nothing is listed there. I've reinstalled my drivers. I reset my GPUs back to stock bios and oc settings.  None of them worked. At this point I'm thinking it might be a problem with the card unless there is something that I am missing.
sr. member
Activity: 588
Merit: 272
⭐⭐⭐⭐⭐
March 24, 2018, 02:22:51 PM
#6
Increase virtual memory (Pagefile) at least to 16GB, greater would be better (adjust to your storage capacity).
It is currently 16gb

Then you can be tried what suggested by @sindikat above. Or may you can try to run your GPUs on stock setting.
newbie
Activity: 17
Merit: 0
March 24, 2018, 02:11:39 PM
#5
Increase virtual memory (Pagefile) at least to 16GB, greater would be better (adjust to your storage capacity).
It is currently 16gb
jr. member
Activity: 269
Merit: 4
March 24, 2018, 02:06:37 PM
#4
First things first... Are you dual mining Dec with Eth, or Eth by itself?  If Eth by itself, add the command -mode 1 to your start file.
full member
Activity: 364
Merit: 106
March 24, 2018, 12:55:48 PM
#3
You need to check the settings of Windows defender. Perhaps Claymore is blocked as a suspicious application. Try disabling Windows defender and if the app is running, add the Claymore to the exclusion list. I don't see whether the GPU is being tested or not. Perhaps the problem with the drivers of the GPU. Check in the hardware properties.
sr. member
Activity: 588
Merit: 272
⭐⭐⭐⭐⭐
March 24, 2018, 12:43:55 PM
#2
Increase virtual memory (Pagefile) at least to 16GB, greater would be better (adjust to your storage capacity).
newbie
Activity: 17
Merit: 0
March 24, 2018, 11:24:23 AM
#1
Claymore crashes right after setup as soon as the DCR pool check comes up. Here is the log:
11:20:23:565   1bb0   args: -epool us1.ethermine.org:4444 -ewal 0x0C631014cEf643D5AB274aF449a0F2317d879D99.bigrig -epsw x
11:20:23:565   1bb0   
11:20:23:565   1bb0   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
11:20:23:581   1bb0   º                Claymore's Dual GPU Miner - v11.5               º
11:20:23:581   1bb0   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
11:20:23:596   1bb0   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
11:20:23:596   1bb0   
11:20:23:596   1bb0   b541
11:20:23:815   1bb0   ETH: 1 pool is specified
11:20:23:831   1bb0   Main Ethereum pool is us1.ethermine.org:4444
11:20:23:831   1bb0   DCR: 0 pool is specified

It crashes right after that. I've tried everything I can find and it hasn't helped.
After a bunch of extensive googling I haven't come up with any answers so I was hoping y'all could help. Thanks in Advance for any help Cheesy
Pages:
Jump to: