@bmxakias
the BitcoinZ algo 144_5
thank you for the update EWBF_
now i'm getting on a 1080ti with 100% PL, +100 Core, +400 Mem about 58-60 Sol/s
for now no rejected shares, have to test it for stability over night
Topic: EWBF's Cuda Equihash Miner 0.6 - page 46. (Read 85776 times)
tested today the new miner on a 1080ti, I'm getting ~50 Sol/s with following settings:
80% PL, +100 Core, -500 Mem
tried with +400 Mem -> doesn't change anything.
at more than +100 MHz Core Clock my card gets unstable, i think others can overclock their cards even more
and finaly the Powerlimit is "automaticaly" set, if i set it to 100% GPU-Z shows that the card uses only about 80% TDP
@EWBF_
would be nice if you could look at the intensity settings. (for those who mine on their desktops
)
on the new miner intensity does nothing (or to little)
with the 0.3.4b version i can watch videos with intensity 8 (GPU Load 97%)
edit: yeah some people mentioned intensity
80% PL, +100 Core, -500 Mem
tried with +400 Mem -> doesn't change anything.
at more than +100 MHz Core Clock my card gets unstable, i think others can overclock their cards even more
and finaly the Powerlimit is "automaticaly" set, if i set it to 100% GPU-Z shows that the card uses only about 80% TDP
@EWBF_
would be nice if you could look at the intensity settings. (for those who mine on their desktops
)on the new miner intensity does nothing (or to little)
with the 0.3.4b version i can watch videos with intensity 8 (GPU Load 97%)
edit: yeah some people mentioned intensity
50Sol/s? In which algo?
I wish you continued success.
many positive comments from those who try to make you proud
many positive comments from those who try to make you proud
Version 0.2 is released, i call it "HotFix", not so much new, but the problem with rejected shares should be fixed, or at least reduced.
Version for cuda 8 will be ready later.
Version for cuda 8 will be ready later.
For all of those with high load and/or confusing Sol/s issues:
The changes to your CoinX K,N values creates a significantly more difficult and demanding algorithm to solve. Don't blame the mining software for putting a greater strain on your system when you're choosing to mine something that requires a greater strain on your system. Your CoinX devs should have made this stuff known to you!
You can thank all of the Bitmain haters for your issues (the ones that decided these changes without even knowing thing one about the software in the ASICs that Bitmain did/could/would/will produce).
The changes to your CoinX K,N values creates a significantly more difficult and demanding algorithm to solve. Don't blame the mining software for putting a greater strain on your system when you're choosing to mine something that requires a greater strain on your system. Your CoinX devs should have made this stuff known to you!
You can thank all of the Bitmain haters for your issues (the ones that decided these changes without even knowing thing one about the software in the ASICs that Bitmain did/could/would/will produce).
tested today the new miner on a 1080ti, I'm getting ~50 Sol/s with following settings:
80% PL, +100 Core, -500 Mem
tried with +400 Mem -> doesn't change anything.
at more than +100 MHz Core Clock my card gets unstable, i think others can overclock their cards even more
and finaly the Powerlimit is "automaticaly" set, if i set it to 100% GPU-Z shows that the card uses only about 80% TDP
@EWBF_
would be nice if you could look at the intensity settings. (for those who mine on their desktops )
on the new miner intensity does nothing (or to little)
with the 0.3.4b version i can watch videos with intensity 8 (GPU Load 97%)
edit: yeah some people mentioned intensity
80% PL, +100 Core, -500 Mem
tried with +400 Mem -> doesn't change anything.
at more than +100 MHz Core Clock my card gets unstable, i think others can overclock their cards even more
and finaly the Powerlimit is "automaticaly" set, if i set it to 100% GPU-Z shows that the card uses only about 80% TDP
@EWBF_
would be nice if you could look at the intensity settings. (for those who mine on their desktops
)on the new miner intensity does nothing (or to little)
with the 0.3.4b version i can watch videos with intensity 8 (GPU Load 97%)
edit: yeah some people mentioned intensity
current problems:
'intensity 0' now feels like 'intensity 10' with 0.3.4 version - cant play/watch videos while mining
hope you optimize it
'intensity 0' now feels like 'intensity 10' with 0.3.4 version - cant play/watch videos while mining
hope you optimize it
Ya please look at the intensity.. previously on intensity 2 i could still watch a video with no hesitation or lag and now it seems no matter what setting i have it on the intensity is too much to run smoothly.
Thanks
everythign is working BUT mu sols/s per gtx 1070ti is 32 nwm thats how it should be good job
nwm thats how it should be good job
current problems:
high CPU load on 'system' process (about 3% for each card running on [email protected]),
'intensity 0' now feels like 'intensity 10' with 0.3.4 version - cant play/watch videos while mining
hope you optimize it
high CPU load on 'system' process (about 3% for each card running on [email protected]),
'intensity 0' now feels like 'intensity 10' with 0.3.4 version - cant play/watch videos while mining
hope you optimize it
instead ZERO Pow - need to write BitcoinZ
Any help, I keep getting rejected shares 
Edit same here now! After a while working normally... only rejected shares!
P106-100 and p104-100 mining edition cards are not supported because of older drivers. Devs are you going to make a fix for it or is there a newer version of driver that can be used with mining cards. Im using 382.53 driver and it was the only one working for mining anything ?
Can you please help me my gtx 980ti 6gb is only getting 13 sols n the new equihash miner 144_5 and gtx 970 4 gb is getting11 sols but my gtx 1060 3gb is getting 20sols. my gtx 980ti gets 525 sols on the regular equihash which is better that my gtx 1070. please help.
Same here!
Any help, I keep getting rejected shares
instead ZERO Pow - need to write BitcoinZ
What im doing wrong? both parameters - reject
https://yadi.sk/i/jZjaLAy_3Xzjgc
https://yadi.sk/i/QuIyoBK43Xzjh3
https://yadi.sk/i/jZjaLAy_3Xzjgc
https://yadi.sk/i/QuIyoBK43Xzjh3
Can you please help me my gtx 980ti 6gb is only getting 13 sols n the new equihash miner 144_5 and gtx 970 4 gb is getting11 sols but my gtx 1060 3gb is getting 20sols. my gtx 980ti gets 525 sols on the regular equihash which is better that my gtx 1070. please help.
In the same boat with my gtx 970 and 980's seem to have taken a pretty big hit.
I noticed the MCU load on the 980ti was only 19-20% on 144_5 but on normal equihash its at 72-75%. hopefully someone can help.
192_7 and 144_5 are more memory intensive, not calculation intensive, so they will produce substantially lower hash rates. Perfectly normal.
BTW, EWBF, please don't compile with CUDA 9.1. It has serious bugs and has been superseded by 9.2.
Can you please help me my gtx 980ti 6gb is only getting 13 sols n the new equihash miner 144_5 and gtx 970 4 gb is getting11 sols but my gtx 1060 3gb is getting 20sols. my gtx 980ti gets 525 sols on the regular equihash which is better that my gtx 1070. please help.
In the same boat with my gtx 970 and 980's seem to have taken a pretty big hit.
I noticed the MCU load on the 980ti was only 19-20% on 144_5 but on normal equihash its at 72-75%. hopefully someone can help.
192_7 and 144_5 are more memory intensive, not calculation intensive, so they will produce substantially lower hash rates. Perfectly normal.
Please add equihash 210,9
Jump to: