Topic: EWBF's CUDA Zcash miner - page 187. (Read 2164327 times)
Hello, tell me how to get the API data? Use the --api and in the browser trying to go to ip:port, but in return get nothing.
Version 0.3.3b released.
Thankyou once again EWBF FTW now you have the fastest equihash miner and with nofee option
You are a Legend Sir
Regards
#Nemo
Could you please explain the --fee option EBWF_?
You can set size of devfee in percentages --fee 0 no devfee --fee 2 - 2% --fee 1.5 - 1.5% etc. By default fee is 2%.
Could you please explain the --fee option EBWF_?
Awesome, thank you! How do we set the dev fee?
Thanks for the new release !
Version 0.3.3b released.
What speed are people getting with a 1080 gtx ?
getting 493 to 634 just depends on how much $$ on power I want to spend and how hot I want to run them
currently doing 551 running at 68c
question
how much do you do at minimum target power limit? the lowest that you can go ??
thanks!
indkt
What speed are people getting with a 1080 gtx ?
getting 493 to 634 just depends on how much $$ on power I want to spend and how hot I want to run them
currently doing 551 running at 68c
How do you get 634? the highest I could get was 560! I have asus rog 1080
@m1n1ngP4d4w4n:
In a 2 PSU system like you have what happens if the secondary PSU fails or
someone switch it off Inadvertently?
In a 2 PSU system like you have what happens if the secondary PSU fails or
someone switch it off Inadvertently?
Then you would lose what ever is powering it... if its just gpu's some or all then you lose them, if its the mobo then you lose it all
Ok but wont the Mobo catch on fire if a gpu is not powered?
It might.
depends on the riser, and how did you connected it.
in a multi PSU scenario, the worst think that can happen is when the secondary power supply turn off, while the primary keeps working, you have to avoid that at all costs.
I did a power Y cable to connect two PSU to 1 socket, to prevent accidentally unpluggin one of the two psus.
also all the risers powered by the same psu that powers the motherboard, the secondary motherboard only powers Rear GPU connectors (6/8 pin) this is the best config for max safety.
still avoid secondary PSU shutdown.
using a ADD2PSU like gadget and powering both PSU from the same power plug with a homemade Y power cable, is quite safe.
have been done that for 3 years on about 20 rigs, so.... not 1 PSU died, not 1 mother/GPU had issues (except for GPU fan issues which are common)
can anyone tell me please
what speed on gtx 970 and 980ti with 100% tdp,default sets and latest (0.3.2) version of miner?
thanks a lot.
what speed on gtx 970 and 980ti with 100% tdp,default sets and latest (0.3.2) version of miner?
thanks a lot.
@EWBF_: hi, updated yesterday my NVidia GeForce Game Ready Driver to Ver. 378.92. Mining with 0.3.2 now brings only 245 sols against 290-300 sols before the update. The good thing is temperature is steady betwenn 50-55 degree, much healthier for the hardware. Tested mining also with other coins, e.g. XRE with ccminer. 8500 kH/s before update, now 6800 kH/s. Maybe some others here make the same experience and it can be considered in further versions.
Hello I write through the translator so don't be offended help solve the problem 
That isn't a flypool address, I don't see a twallet address and why do you have pause in your config?
Input full email, for example:
miner --server zec.pool.minergate.com --user [email protected] --pass x --port 3357
Yes. 0.3.3b almost ready to release. I think tuesday or wednesday, because i need properly test it.
More speed?
Unfortunately not. Maybe you next
on this way.I am making money thanks to you, and you are making money thanks to guys like me, so...perfect symbiosis
what features are you making for next version?
i am still using 030b because i noticed (at least in the pool i use) that version 032b says more hash locally but less on the pool
i use minimum TPL on my cards.
plz comment on that when you can
thanks!
indkt.
I test miner on different pools flypool, nanopool on time frame >24 hours and speed are correct. So i think it depends on how the pool calculate hashrate.
About features i promised to add option --fee and this is main reason for release this version, in addition i was add power efficiency calculator which will show performance per watt.
@m1n1ngP4d4w4n:
In a 2 PSU system like you have what happens if the secondary PSU fails or
someone switch it off Inadvertently?
In a 2 PSU system like you have what happens if the secondary PSU fails or
someone switch it off Inadvertently?
Then you would lose what ever is powering it... if its just gpu's some or all then you lose them, if its the mobo then you lose it all
Ok but wont the Mobo catch on fire if a gpu is not powered?
Hello I write through the translator so don't be offended help solve the problem http://i042.radikal.ru/1703/25/ed81d290e7f3t.jpg
That isn't a flypool address, I don't see a twallet address and why do you have pause in your config?
@m1n1ngP4d4w4n:
In a 2 PSU system like you have what happens if the secondary PSU fails or
someone switch it off Inadvertently?
In a 2 PSU system like you have what happens if the secondary PSU fails or
someone switch it off Inadvertently?
Then you would lose what ever is powering it... if its just gpu's some or all then you lose them, if its the mobo then you lose it all
@m1n1ngP4d4w4n:
In a 2 PSU system like you have what happens if the secondary PSU fails or
someone switch it off Inadvertently?
In a 2 PSU system like you have what happens if the secondary PSU fails or
someone switch it off Inadvertently?
What speed are people getting with a 1080 gtx ?
getting 493 to 634 just depends on how much $$ on power I want to spend and how hot I want to run them
currently doing 551 running at 68c
Hello I write through the translator so don't be offended help solve the problem http://i042.radikal.ru/1703/25/ed81d290e7f3t.jpg
That isn't a flypool address, I don't see a twallet address and why do you have pause in your config?
Jump to: