Topic: [EXPIRED] Help me setup Reaper v13 to mine LTC with my 6950s (Read 21316 times)
Looking at how unstable LTC is lately, I'm throwing in the towel on this one. I'm gonna try a few thing listed above, and then I'm out.
host 67.210.248.11
port 9332
user Graet.6
pass p
protocol litecoin
worksize 256
aggression 18
threads_per_gpu 1
sharethreads 20
is my litecoin.conf file from reaper, i had real issues connecting with url with and without http:// but found this to work for lc.ozco.in on my Gigabyte 6950's. I have 1 x 3 card rig running and a single card machine, the only diff in the conf files is worker number
Hope thats a help
port 9332
user Graet.6
pass p
protocol litecoin
worksize 256
aggression 18
threads_per_gpu 1
sharethreads 20
is my litecoin.conf file from reaper, i had real issues connecting with url with and without http:// but found this to work for lc.ozco.in on my Gigabyte 6950's. I have 1 x 3 card rig running and a single card machine, the only diff in the conf files is worker number
Hope thats a help
Getting reaperdemo solo mining on TwinFrozr 6950 fine but it is a real hog on video card, slowing down the rest of the machine.
(QUad Core P4 with Win7 64bit).
Anyone know how to downrate the program? I tried different number of threads and different aggression to no obvious effect?
aggression 14 or less will make desktop usable.
host 67.210.248.11
port 9332
user Graet.6
pass p
protocol litecoin
worksize 256
aggression 18
threads_per_gpu 1
sharethreads 20
is my litecoin.conf file from reaper, i had real issues connecting with url with and without http:// but found this to work for lc.ozco.in on my Gigabyte 6950's. I have 1 x 3 card rig running and a single card machine, the only diff in the conf files is worker number
Hope thats a help
port 9332
user Graet.6
pass p
protocol litecoin
worksize 256
aggression 18
threads_per_gpu 1
sharethreads 20
is my litecoin.conf file from reaper, i had real issues connecting with url with and without http:// but found this to work for lc.ozco.in on my Gigabyte 6950's. I have 1 x 3 card rig running and a single card machine, the only diff in the conf files is worker number
Hope thats a help
Getting reaperdemo solo mining on TwinFrozr 6950 fine but it is a real hog on video card, slowing down the rest of the machine.
(QUad Core P4 with Win7 64bit).
Anyone know how to downrate the program? I tried different number of threads and different aggression to no obvious effect?
Changing worksize to 128 didn't help me in a positive way, but my miner still worked (mining LTC on a 5970 btw)
The first time i tried, i used a 5770, which obviously didn't work. Trying again on my 5970 straight after did NOT work. I had to delete the folder and unpack the folder again before it would work.
Current configs are :
host mine.pool-x.eu
port 8337
user *username*
pass *password*
protocol litecoin
worksize 256
aggression 16
threads_per_gpu 2
sharethreads 20
So try deleting the reaperv13_demo folder and unpack it again, that's my only tips
The first time i tried, i used a 5770, which obviously didn't work. Trying again on my 5970 straight after did NOT work. I had to delete the folder and unpack the folder again before it would work.
Current configs are :
host mine.pool-x.eu
port 8337
user *username*
pass *password*
protocol litecoin
worksize 256
aggression 16
threads_per_gpu 2
sharethreads 20
So try deleting the reaperv13_demo folder and unpack it again, that's my only tips
I would suggest you to uninstall your Current OpenCL driver(it is in the directory for instance :11-8_vista64_win7_64_dd\Packages\Apps\OpenCL64) and trying this one from 11.8, it worked on mine 6950
http://depositfiles.com/files/fs6odb0rk
Work size didnt mater(almost all setting was set to default), thread cores set to 22 from 20,this is the number of cores OpenCL reports about.
Plus try to install http://www.microsoft.com/download/en/details.aspx?id=14632
http://depositfiles.com/files/fs6odb0rk
Work size didnt mater(almost all setting was set to default), thread cores set to 22 from 20,this is the number of cores OpenCL reports about.
Plus try to install http://www.microsoft.com/download/en/details.aspx?id=14632
https://i.imgur.com/SKsRt.png
You still getting this get work error?
How are you advanced so far.
I mean from cmd prompt closing instantly to lib error ........
Check firewall & router, it may be blocking ports..
I also see a strange behavior with reaperv13
I put in startup a shortcut to mine from start up & it mines at 226 kH/s....
If i close it or exit it, then if run again, my speed drops to less than 10 kH/s, like mining at 4 kH/s, then it increases slowly to reach maximum speed of 226 kH/s, which takes more than 30 minutes.
This strange thing also happens if i remove from start up folder & running manually.
So for me it works FIRST TIME after system restart at full hash rate & if closed & open again then it goes to very low hash then increases slowly to reach max hash rate.
1-10 kH/s to 226 kH/s.
You still getting this get work error?
How are you advanced so far.
I mean from cmd prompt closing instantly to lib error ........
Check firewall & router, it may be blocking ports..
I also see a strange behavior with reaperv13
I put in startup a shortcut to mine from start up & it mines at 226 kH/s....
If i close it or exit it, then if run again, my speed drops to less than 10 kH/s, like mining at 4 kH/s, then it increases slowly to reach maximum speed of 226 kH/s, which takes more than 30 minutes.
This strange thing also happens if i remove from start up folder & running manually.
So for me it works FIRST TIME after system restart at full hash rate & if closed & open again then it goes to very low hash then increases slowly to reach max hash rate.
1-10 kH/s to 226 kH/s.
if you hop on freenode and join #litecoin and ask for me there so we can have live communication ill be more than happy to try
im there as d34th ill be there tomorrow from 3-8 est feel free to ask me then 
You said my solo mining instructions did not work; did you try running litecoin daemon as an administrator from the command prompt (type cmd into the start menu, right click, run as administrator)? If it's running correctly it should at least give you some kind of error in reaper that it's downloading the block chain or something. The command prompt will also tell you if the daemon gets some kind of error (it will kill itself and return an error if your configuration is messed up).
Interested and want to figure this out myself as I can't seem to get it to run either.
Cayman: 69xx
Barts: 68xx
Cypress: 58xx
Juniper: 57xx
Tahiti: 79xx
Trying to use the kernel for Barts from Cayman doesn't seem to work... (connects to pool, but only gives stales)
Barts: 68xx
Cypress: 58xx
Juniper: 57xx
Tahiti: 79xx
Trying to use the kernel for Barts from Cayman doesn't seem to work... (connects to pool, but only gives stales)
I'm pretty sure my 6950 is a Cayman. That's what GUIminer sees my cards as, and that's what Reaper seems to use/build if I remove the cayman.bin file
Keep in mind this is a nearly fresh install of Win7, only Catalyst, and MSI Afterburner installed. I'm guessing there's some sort of distributable .Net or C+ that Reaper needs...
Also increasing this to 2 BTC, I gotta figure this out...
Cayman: 69xx
Barts: 68xx
Cypress: 58xx
Juniper: 57xx
Tahiti: 79xx
Trying to use the kernel for Barts from Cayman doesn't seem to work... (connects to pool, but only gives stales)
Barts: 68xx
Cypress: 58xx
Juniper: 57xx
Tahiti: 79xx
Trying to use the kernel for Barts from Cayman doesn't seem to work... (connects to pool, but only gives stales)
I get the same problem when i edit the file to work with my Juniper Card ,, Only stale shares
Cayman: 69xx
Barts: 68xx
Cypress: 58xx
Juniper: 57xx
Tahiti: 79xx
Trying to use the kernel for Barts from Cayman doesn't seem to work... (connects to pool, but only gives stales)
Barts: 68xx
Cypress: 58xx
Juniper: 57xx
Tahiti: 79xx
Trying to use the kernel for Barts from Cayman doesn't seem to work... (connects to pool, but only gives stales)
Quote
6. Run reaperDEMO.exe. If it throws a kernel error, go into the directory. There should be a litecoin-reaperv13.XXXXX.bin file where XXXXX is your architecture. Rename litecoin-reaperv13.Cayman.bin to litecoin-reaperv13.XXXXX.bin. Reaper should work fine now.
https://bitcointalksearch.org/topic/m.775590
I may be way off here, but I remember seeing somewhere of changing the name from Cayman to Bruno or something if you have 59xx boards. Aren't Caymans the 58xx and 68xx ? Can't remember the exact facts, but hadn't seen this suggested yet as you try to get reaper 13 going.
I tried with worksize 128 & hash reduced to 45 from 226 & also not submitting shares.
changing worksize to 256 started mining.
changing worksize to 256 started mining.
Does your 5870 have 1 or 2 GB or memory?
1024MB Asus 5870
if you hop on freenode and join #litecoin and ask for me there so we can have live communication ill be more than happy to try
make sure you have latest amd drivers ,you may have to lower aggression some
host litecoinpool.org
port 9332
user abbeytim.1
pass 1
protocol litecoin
worksize 256
aggression 18
threads_per_gpu 1
sharethreads 20
if this helps 1HJMCnLnNHRK2ZRnpp3UwHeLVqgprQCbVC
host litecoinpool.org
port 9332
user abbeytim.1
pass 1
protocol litecoin
worksize 256
aggression 18
threads_per_gpu 1
sharethreads 20
if this helps 1HJMCnLnNHRK2ZRnpp3UwHeLVqgprQCbVC
edit: nvm, you already saw that.
host 67.210.248.11
port 9332
user Graet.6
pass p
protocol litecoin
worksize 256
aggression 18
threads_per_gpu 1
sharethreads 20
is my litecoin.conf file from reaper, i had real issues connecting with url with and without http:// but found this to work for lc.ozco.in on my Gigabyte 6950's. I have 1 x 3 card rig running and a single card machine, the only diff in the conf files is worker number
Hope thats a help
port 9332
user Graet.6
pass p
protocol litecoin
worksize 256
aggression 18
threads_per_gpu 1
sharethreads 20
is my litecoin.conf file from reaper, i had real issues connecting with url with and without http:// but found this to work for lc.ozco.in on my Gigabyte 6950's. I have 1 x 3 card rig running and a single card machine, the only diff in the conf files is worker number
Hope thats a help
I tried with worksize 128 & hash reduced to 45 from 226 & also not submitting shares.
changing worksize to 256 started mining.
changing worksize to 256 started mining.
Does your 5870 have 1 or 2 GB or memory?
I think it's safe to assume that only worksize 256 actually works.
So the problem is now getting the program to start with "worksize 256" without crashing...
Jump to: