no replies from cryptx 
...
...Same here, and I've had no luck sourcing the part I need
Topic: FAST AUCTION BITMINE COINCRAFT DESKS - page 2. (Read 4117 times)
Same here, and I've had no luck sourcing the part I need
no replies from cryptx ...
... I think squall1066 might know a thing or two about fixing this:
https://bitcointalksearch.org/topic/wtb-horiz-pcb-mount-hdr-connector-643120
Awesome, thanks very much
My local electronics shop managed to fix one of my two broken blades as it only required the connector soldering back on.
Sadly the last broken blade is toast, the connector is completely missing (it's not even loose in the case or the box)
snip
Sadly the last broken blade is toast, the connector is completely missing (it's not even loose in the case or the box)
snip
I think squall1066 might know a thing or two about fixing this:
https://bitcointalksearch.org/topic/wtb-horiz-pcb-mount-hdr-connector-643120
My local electronics shop managed to fix one of my two broken blades as it only required the connector soldering back on.
Sadly the last broken blade is toast, the connector is completely missing (it's not even loose in the case or the box)
Sadly the last broken blade is toast, the connector is completely missing (it's not even loose in the case or the box)
What is the hell! How could the damn power cable be so badly mangled?! Were these shipped through the gates of hell or something?
No kidding. Really don't see how rough shipping alone could've caused that kind of damage. Hope you guys are able to get something worked out with cryptx soon.
What is the hell! How could the damn power cable be so badly mangled?! Were these shipped through the gates of hell or something?
also one of the modules seam to be cracked out of the board, it was tumbling inside the case
will have to dismantle the miner to get into the details...
fu.. fedex!
my coindesk also arrived in a very bad condition!
the plug of the power cord was smashed. Still have to look inside the miner...
my coindesk also arrived in a very bad condition!
the plug of the power cord was smashed. Still have to look inside the miner...
Well Fed-Ex finally delivered the last of the 3 miners (1 per day over 3 days).
Although the packaging is intact and it's the only that had no heatsinks loose, 2 of the blades have broken connectors, one is completely missing and the other has the top row disconnected, so currently only working with 3 blades.
I have PM'd cryptx with several options to hopefully rectify this issue
Although the packaging is intact and it's the only that had no heatsinks loose, 2 of the blades have broken connectors, one is completely missing and the other has the top row disconnected, so currently only working with 3 blades.
I have PM'd cryptx with several options to hopefully rectify this issue
bought 2 from the week before's auction. poorly packaged. bashed up by fedex. cryptx not bothered. similar power supply issues.
Hopefully you got lucky and got at least one unit with one of those Super Flower 1200 Platinum PSUs, but I would still recommend taking out the PSU from the case.
bought 2 from the week before's auction. poorly packaged. bashed up by fedex. cryptx not bothered. similar power supply issues.
Hmm, indeed the packaging job could've been better. Out of 5 that I bought from him which were shipped 2 were totally destroyed. I'm waiting for another unit which I bought from a separate auction. I hope that one arrives in one piece.
I'm also hoping cryptx would either refund me or replace the damaged units. We shall see. He must be a busy man as it usually takes a while to get a response to PMs.
I bought 2 units from him only 1 arrived, i´m requesting refund for 3 days and no answer from him
bought 2 from the week before's auction. poorly packaged. bashed up by fedex. cryptx not bothered. similar power supply issues.
lol, another public service announcement. If your unit comes with a Silverstone 1200 watt PSU please remove it from the case and mount it externally. It cannot stand operating inside the case - hotbox. It will overheat and shutdown. I had this happen to be a few hours ago. The other PSU I have is some sparkle power one and it seems to be surviving operating inside the case, but I for one will be moving it outside the case just to be safe - hopefully the PSU's cables are long enough.
Those of you more enterprising would want to drill a 120mm hole where the PSU sits and reverse the PSU so it's intake fan is facing the hole - ie do what the designer of this miner should've done in the first place.
Those of you more enterprising would want to drill a 120mm hole where the PSU sits and reverse the PSU so it's intake fan is facing the hole - ie do what the designer of this miner should've done in the first place.
thx for the info ! my miner also arrived with the pins bent on the backplane , little rattling on the hashing boards but they did were attached, just some loosen screws on the bottom. the display ribbon cable 1 of the wire was broken, attached it back but only a red background lcd display showing blanks. besides that it is working fine with FW 1907. I got the 1200W SF plat psu.
lol, another public service announcement. If your unit comes with a Silverstone 1200 watt PSU please remove it from the case and mount it externally. It cannot stand operating inside the case - hotbox. It will overheat and shutdown. I had this happen to be a few hours ago. The other PSU I have is some sparkle power one and it seems to be surviving operating inside the case, but I for one will be moving it outside the case just to be safe - hopefully the PSU's cables are long enough.
Those of you more enterprising would want to drill a 120mm hole where the PSU sits and reverse the PSU so it's intake fan is facing the hole - ie do what the designer of this miner should've done in the first place.
Those of you more enterprising would want to drill a 120mm hole where the PSU sits and reverse the PSU so it's intake fan is facing the hole - ie do what the designer of this miner should've done in the first place.
Rattling secondary heatsinks.... Check
No idea where they go and machine is in an air conditioned server room with good temps so not too fussed atm
Biggest problem was only 1 of the blades was working. Backplane was a bit loose so pushed it down tighter, 0 blades working
Removed the backplane completely and most of the pins were bent, took ages to straighten them all up, but once done it's running fine now
No idea where they go and machine is in an air conditioned server room with good temps so not too fussed atm
Biggest problem was only 1 of the blades was working. Backplane was a bit loose so pushed it down tighter, 0 blades working
Removed the backplane completely and most of the pins were bent, took ages to straighten them all up, but once done it's running fine now
I think cryptx needs to use a thicker box with more foam padding. FedEx is not too kind to heavy boxes.
Rattling secondary heatsinks.... Check
No idea where they go and machine is in an air conditioned server room with good temps so not too fussed atm
Biggest problem was only 1 of the blades was working. Backplane was a bit loose so pushed it down tighter, 0 blades working
Removed the backplane completely and most of the pins were bent, took ages to straighten them all up, but once done it's running fine now
No idea where they go and machine is in an air conditioned server room with good temps so not too fussed atm
Biggest problem was only 1 of the blades was working. Backplane was a bit loose so pushed it down tighter, 0 blades working
Removed the backplane completely and most of the pins were bent, took ages to straighten them all up, but once done it's running fine now
Have any of these shipped....I've yet to hear from cryptx with tracking info.
Mine have shipped so I presume yours have as well.
1 of the 3 arrived today, the other 2 have only got as far as france, stupid fed-ex.
Ah ok, so likely mine has shipped but I just don't have a tracking number. Maybe I'll have a surprise at my doorstep sometime this week.
Public service annnoucement: make sure you open the miner and check for shipping damage. 2 of the miners I bought previously from cryptx arrived with all the secondary heatsinks detached and rattling in the case. Also one capacitor is missing from one of the blades. Hope you all have some thermal adhesive handy to reattach the heatsinks.
Have any of these shipped....I've yet to hear from cryptx with tracking info.
Mine have shipped so I presume yours have as well.
1 of the 3 arrived today, the other 2 have only got as far as france, stupid fed-ex.
Jump to: