Feathercoin [FTC] - page 170. | Bitcointalksearch.org

klenker

member

Activity: 80

Merit: 10

Prospecting on the net, in a rundown old shack..

Quote from: jdebunt on April 19, 2013, 06:31:43 AM

Quote from: klenker on April 19, 2013, 05:50:23 AM

I'm not having much luck with the pools.

Seems connecting is very erratic, and then I'm getting rejected errors, and I've even rebooted to ensure it's not something to do with the miner.

It wont connect and then it does, but fails.

hrmm... is the server capable of holding this much info or is it flaking out??

Seems to be happening to pretty much any server with any currency on it, probably DDoS or something else.

BBQcoin server is throwing me out every 2 min aswell, reconnects, 2 min later, again,...

could be the miner too tho but it happens with cudaminer, guiminer, minerd,....

Ahh yeah, I was hoping it wasn't something like that, I'm getting it with cgminer and minerd which were both flying earlier today. Now neither can connect, or if it does, invalid data kills it.

Hopefully they tire in time.. Sad

jdebunt

legendary

Activity: 1596

Merit: 1010

EDIT : nevermind, works again

Woshie

newbie

Activity: 36

Merit: 0

Quote from: Benny1985 on April 19, 2013, 07:15:12 AM

Did AltPool go down? I can't get to their website, and I have been paid for 4hrs.

https://bitcointalksearch.org/topic/m.1884015

blastbob

hero member

Activity: 602

Merit: 500

Just add -o host -u user -p password then add a new around with the same
etc.

-o host1 -u user -p password -o host2 -u user -p password

Benny1985

sr. member

Activity: 391

Merit: 250

Did AltPool go down? I can't get to their website, and I have been paid for 4hrs.

fundamentals

newbie

Activity: 22

Merit: 0

Quote from: blastbob on April 19, 2013, 06:44:29 AM

I switched to the pushpool version now. Seems good.

You can use the command below to make cgminer switch automatic between pushpool and p2pool. You can even add a third if needed

Quote

cgminer --scrypt -o http://fpool1.zapto.org:28339 -u username.1 -p x -o stratum+tcp://fpool1.zapto.org:19327 -u YourFcAddress -p x -s 1 --expiry 1 --queue 0 -I 13

The pushpool version is giving me lots of connection errors the last 12 hours. The p2pool version seems ok for me.

Ilocans

member

Activity: 77

Merit: 10

Thanks but when I tried the other one yesterday it did not work.
Question abour your cgminer command: what's making it switch between both?

blastbob

hero member

Activity: 602

Merit: 500

I switched to the pushpool version now. Seems good.

You can use the command below to make cgminer switch automatic between pushpool and p2pool. You can even add a third if needed

Quote

cgminer --scrypt -o http://fpool1.zapto.org:28339 -u username.1 -p x -o stratum+tcp://fpool1.zapto.org:19327 -u YourFcAddress -p x -s 1 --expiry 1 --queue 0 -I 13

Ilocans

member

Activity: 77

Merit: 10

Quote from: MarKusRomanus on April 19, 2013, 12:33:37 AM

Quote from: MarKusRomanus on April 19, 2013, 12:22:37 AM

Quote from: klenker on April 19, 2013, 12:08:16 AM

Hmm, I keep seeing

Pool 0 communication failure, caching submissions

in my cgminer window, for http://fpool1.zapto.org:28339 ?

Seems to have just started appearing within the last 30 mins or so..

is that normal? I am seeing with this : Pool 0 share became stale while retrying submit, discarding

Huh

Yea there seems to be issues now... it was smooth a few hours ago.. rough now.. i get the same thing.

Running smoothly again

I have a lot of stale (30%) and I keep seeing Pool 0 stale share detected, submitting as user requested

Am I the only one ?

jdebunt

legendary

Activity: 1596

Merit: 1010

Quote from: klenker on April 19, 2013, 05:50:23 AM

I'm not having much luck with the pools.

Seems connecting is very erratic, and then I'm getting rejected errors, and I've even rebooted to ensure it's not something to do with the miner.

It wont connect and then it does, but fails.

hrmm... is the server capable of holding this much info or is it flaking out??

Seems to be happening to pretty much any server with any currency on it, probably DDoS or something else.

BBQcoin server is throwing me out every 2 min aswell, reconnects, 2 min later, again,...

could be the miner too tho but it happens with cudaminer, guiminer, minerd,....

klenker

member

Activity: 80

Merit: 10

Prospecting on the net, in a rundown old shack..

I'm not having much luck with the pools.

Seems connecting is very erratic, and then I'm getting rejected errors, and I've even rebooted to ensure it's not something to do with the miner.

It wont connect and then it does, but fails.

hrmm... is the server capable of holding this much info or is it flaking out??

perhan007

sr. member

Activity: 518

Merit: 250

Quote from: Fernandez on April 19, 2013, 05:25:32 AM

Relying on my rusty CPU and a couple of giveaways; I have collected a few coins. Will buy that Porsche once the value becomes 1000 USd each Cool

keep up the good work!!

PS: Noob question - is it significantly faster than Litecoin?

Once the value becomes 1000 $ each, ill buy you 10 Porsches of your choice ;-)

Yea, it is 4 x faster than Litecoin

Fernandez

legendary

Activity: 1008

Merit: 1000

Relying on my rusty CPU and a couple of giveaways; I have collected a few coins. Will buy that Porsche once the value becomes 1000 USd each Cool

keep up the good work!!

PS: Noob question - is it significantly faster than Litecoin?

jdebunt

legendary

Activity: 1596

Merit: 1010

Quote from: riku2015 on April 19, 2013, 04:35:43 AM

Can i ask something what should we call this coin? ppl using 2 terms

FC and FTC ??
withone is correct one? pools wallets all places has mixed up coin marks, what is the propitiate one to use?

FC = FeatherCoin

riku2015

member

Activity: 112

Merit: 10

Can i ask something what should we call this coin? ppl using 2 terms

FC and FTC ??
withone is correct one? pools wallets all places has mixed up coin marks, what is the propitiate one to use?

tralala33

member

Activity: 71

Merit: 10

I would definitely be interested in developing the website or a faucet etc. Please contact me if you want to work on something.

jdebunt

legendary

Activity: 1596

Merit: 1010

Quote from: mtbitcoin on April 19, 2013, 02:06:23 AM

Quote from: jdebunt on April 19, 2013, 01:55:03 AM

Quote from: perhan007 on April 19, 2013, 01:13:11 AM

Some "big players" joined the game...the times you received 100 FT per day for CPU-mining are already over....

that's also because the difficulty increases big time

and it'll keep increasing big time

this is rather a sign of the popularity of the coin, not necessarily big players joining

One more diff. jump and solo mining is out ...

that's why we have 2 pools up already

EDIT : got the domain feathercoinforum.org for 1 year for free, doing some tweaking on getting a forum up as we speak

mtbitcoin

legendary

Activity: 876

Merit: 1000

Etherscan.io

Quote from: jdebunt on April 19, 2013, 01:55:03 AM

Quote from: perhan007 on April 19, 2013, 01:13:11 AM

Some "big players" joined the game...the times you received 100 FT per day for CPU-mining are already over....

that's also because the difficulty increases big time

and it'll keep increasing big time

this is rather a sign of the popularity of the coin, not necessarily big players joining

One more diff. jump and solo mining is out ...

jdebunt

legendary

Activity: 1596

Merit: 1010

Quote from: perhan007 on April 19, 2013, 01:13:11 AM

Some "big players" joined the game...the times you received 100 FT per day for CPU-mining are already over....

that's also because the difficulty increases big time

and it'll keep increasing big time

this is rather a sign of the popularity of the coin, not necessarily big players joining

MarKusRomanus

legendary

Activity: 910

Merit: 1000

Quote from: richgene on April 19, 2013, 01:06:08 AM

I'm running two 7970's with CGMiner to mine FC.

When I'm at I=12 I average around 230k/s

As soon as I up the Intensity, I get a ton of hardware errors.

here's what I'm starting CGMiner with:

cgminer --crypt -o stratum+tcp://mine.altpool.com:3333/ -s 1 --expiry 1 --queue 0 -u user -p x --shaders 2048 --intensity 13 --fix-protocol --thread-concurrency 4800

Any help/advice would be appreciated. Still getting the hang of tweaking my settings.

~richgene

if you are running on windows, close you miner and open up a cmd window and run this "setx GPU_MAX_ALLOC_PERCENT 100"
It'll say success.. then close that window. Now open up and run cgminer. try setting your thread-concurrency to 4X the shaders. You still may have some trouble going above I13.. but it'll help. I trying to improve mine too and thats what i've come accross so far.

Topic: Feathercoin [FTC] - page 170. (Read 460641 times)