Topic: [Feeler / Poll] NaTTyMiNd - Viacoin Edition - page 3. (Read 3377 times)
Super idea! Very appealing design Natty
Three 1oz silver with precious metal plating on 2 of 3.
That’s the plan. Actually pulling it off will be a challenge. Its really important to me amd the brand to get these designs on something other than a 5 oz, 63.5mm diameter. I just hope my judgement doesn’t get too clouded.
✊
That’s the plan. Actually pulling it off will be a challenge. Its really important to me amd the brand to get these designs on something other than a 5 oz, 63.5mm diameter. I just hope my judgement doesn’t get too clouded.
✊
Sweet, thanks! Are you going for antiqued or shiny silver finish?
The plater is excited to play around with a few different processes. I’m hoping to be put into a situation where both proof-like and antiqued examples will be struck and be used for comparison purposes. If this is the case, I’ll put up a poll and get community feedback for what the production set will be.
Three 1oz silver with precious metal plating on 2 of 3.
That’s the plan. Actually pulling it off will be a challenge. Its really important to me amd the brand to get these designs on something other than a 5 oz, 63.5mm diameter. I just hope my judgement doesn’t get too clouded.
✊
That’s the plan. Actually pulling it off will be a challenge. Its really important to me amd the brand to get these designs on something other than a 5 oz, 63.5mm diameter. I just hope my judgement doesn’t get too clouded.
✊
NLC, the design looks incredible!
3 x 1 oz silver rounds sounds fantastic. I would love to see the face of the sculptor when you show them the sketch - as you mention it will be a challenge to get that much detail in 39mm. I am very much looking forward to the progress.
Three 1oz silver with precious metal plating on 2 of 3.
That’s the plan. Actually pulling it off will be a challenge. Its really important to me amd the brand to get these designs on something other than a 5 oz, 63.5mm diameter. I just hope my judgement doesn’t get too clouded.
✊
That’s the plan. Actually pulling it off will be a challenge. Its really important to me amd the brand to get these designs on something other than a 5 oz, 63.5mm diameter. I just hope my judgement doesn’t get too clouded.
✊
Sweet, thanks! Are you going for antiqued or shiny silver finish?
Three 1oz silver with precious metal plating on 2 of 3.
That’s the plan. Actually pulling it off will be a challenge. Its really important to me amd the brand to get these designs on something other than a 5 oz, 63.5mm diameter. I just hope my judgement doesn’t get too clouded.
✊
That’s the plan. Actually pulling it off will be a challenge. Its really important to me amd the brand to get these designs on something other than a 5 oz, 63.5mm diameter. I just hope my judgement doesn’t get too clouded.
✊
legendary
Activity: 2520
Merit: 3238
The Stone the masons rejected was the cornerstone.
Is this gonna be a 5oz too? 
Love the design already!
Love the design already!
It’s with graphics right now. There’s an internal argument as to whether it can be pulled off on a 39mm footprint. I’m really going to push for it to accomplish the 3 coin 39mm set. The sculptor gets back from vacation in 2 weeks and he’s really the final say.
Once the sculpt is done, I’ll be getting a handful plated and take a poll on the best two plating schemes.
Once the sculpt is done, I’ll be getting a handful plated and take a poll on the best two plating schemes.
Can you enlighten us with a progress update on this? 
I want a pair of sets when they are available. 
NaTTyMiNd holograms never fail to impress.
The name of the coin design is “Day Break”. The serials will be on the glittered bar for production, but I got a few random ones 😉
Hoping to get a production timeline firned up soon, but looking to get the design shared and begin reservations in june👍
Hoping to get a production timeline firned up soon, but looking to get the design shared and begin reservations in june👍
Looking forward to these!!
The name of the coin design is “Day Break”. The serials will be on the glittered bar for production, but I got a few random ones 😉
Hoping to get a production timeline firned up soon, but looking to get the design shared and begin reservations in june👍
Hoping to get a production timeline firned up soon, but looking to get the design shared and begin reservations in june👍
Absolutely stunning design!
I am so impressed that how exquisitely it designed & printed!
Please keep us updated for the upcoming products!
I am so impressed that how exquisitely it designed & printed!
Please keep us updated for the upcoming products!
Not taking reservations at this time
Hehe J/K. But I can't wait until you have more details to share
Not taking reservations at this time
Does this mean you are not planning a third coin in the Eleutheria series after Silver Goddess and Samsara?
The short story is that I was planning to do the viacoin experiment with a professional coin artist that felt that her skill set would coalesce with my style. However, when I pitched the viacoin concept to Michelle (Eleutheria) she was very excited about it, had the time, and she’s a friend. So the viacoin will be a Eleutheria as well. This viacoin thing is somewhat of a test case- we’ll see where it goes.
There are plans for one more 5 oz in spring 2019- but truth be told, this project already puts it behind schedule. But we’re planning on establishing a more formal relationship.
Thanks for the details bud - Q: Are the viacoins going to be shiny silver or antiqued? I prefer shiny, you should try and give smoothie a run for his money at least! I see a big opportunity here for you myself!
Honestly catz I haven't begun discussing what my production limitations are with the mint yet. I've seen some attractive options on both finishing styles that they've done. I think Smoothie's silver set is what you'd call Proof Like - and think its probably my preferred approach - but I'm going to go with what's best for the overall feel for the theme.
What I can say, is that I have high expectations for this design. Anything less than getting Romano in a bidding war with one of you jackals is a fucking failure.
Since its been asked over PM I am plan to produce 150 Sets
The serial numbers 001-150 are being applied to the glittered diagonal of the hologram if I didn't already mention it.
I'll take set #4 & #10 please.
Does this mean you are not planning a third coin in the Eleutheria series after Silver Goddess and Samsara?
The short story is that I was planning to do the viacoin experiment with a professional coin artist that felt that her skill set would coalesce with my style. However, when I pitched the viacoin concept to Michelle (Eleutheria) she was very excited about it, had the time, and she’s a friend. So the viacoin will be a Eleutheria as well. This viacoin thing is somewhat of a test case- we’ll see where it goes.
There are plans for one more 5 oz in spring 2019- but truth be told, this project already puts it behind schedule. But we’re planning on establishing a more formal relationship.
Thanks for the details bud - Q: Are the viacoins going to be shiny silver or antiqued? I prefer shiny, you should try and give smoothie a run for his money at least! I see a big opportunity here for you myself!
Honestly catz I haven't begun discussing what my production limitations are with the mint yet. I've seen some attractive options on both finishing styles that they've done. I think Smoothie's silver set is what you'd call Proof Like - and think its probably my preferred approach - but I'm going to go with what's best for the overall feel for the theme.
What I can say, is that I have high expectations for this design. Anything less than getting Romano in a bidding war with one of you jackals is a fucking failure.
Since its been asked over PM I am plan to produce 150 Sets
The serial numbers 001-150 are being applied to the glittered diagonal of the hologram if I didn't already mention it.
Does this mean you are not planning a third coin in the Eleutheria series after Silver Goddess and Samsara?
The short story is that I was planning to do the viacoin experiment with a professional coin artist that felt that her skill set would coalesce with my style. However, when I pitched the viacoin concept to Michelle (Eleutheria) she was very excited about it, had the time, and she’s a friend. So the viacoin will be a Eleutheria as well. This viacoin thing is somewhat of a test case- we’ll see where it goes.
There are plans for one more 5 oz in spring 2019- but truth be told, this project already puts it behind schedule. But we’re planning on establishing a more formal relationship.
Thanks for the details bud - Q: Are the viacoins going to be shiny silver or antiqued? I prefer shiny, you should try and give smoothie a run for his money at least! I see a big opportunity here for you myself!
Does this mean you are not planning a third coin in the Eleutheria series after Silver Goddess and Samsara?
The short story is that I was planning to do the viacoin experiment with a professional coin artist that felt that her skill set would coalesce with my style. However, when I pitched the viacoin concept to Michelle (Eleutheria) she was very excited about it, had the time, and she’s a friend. So the viacoin will be a Eleutheria as well. This viacoin thing is somewhat of a test case- we’ll see where it goes.
There are plans for one more 5 oz in spring 2019- but truth be told, this project already puts it behind schedule. But we’re planning on establishing a more formal relationship.
A set of 3 is an instabuy for me. I known plenty of people who will be interested.
i will be up for like 2 to 3 sets for a 100/50/25 VIA coin set
Can only agree with the above! Please make it so Natty
Jump to: