Finalising 4000kh/s+ Builds - page 2.

gooseta

newbie

Activity: 28

Merit: 0

Quote from: jlsminingcorp on July 17, 2013, 05:52:37 AM

I don't have too much experience with other GPUs, as the Gigabytes have worked well for us (if it aint broke don't fix it), but I think I've seen vapour-Xs in other people's builds.

Don't crossfire the cards. This can lead to problems and lower hashrates in Windoze and is not needed for mining. Crossfire doesn't seem to have an adverse effect on my linux box for some reason, but it isn't needed so there's no need to take the risk. If you want to use your rig for gaming as well as mining then just hook up the crossfire cables when you switch to gaming mode.

Good to know. Yeah I might hook up the cables when I want to show off benchmark scores or a bit of gaming

Edit: how many kh/s do your gigabytes get?

jlsminingcorp

hero member

Activity: 493

Merit: 500

Hooray for non-equilibrium thermodynamics!

I don't have too much experience with other GPUs, as the Gigabytes have worked well for us (if it aint broke don't fix it), but I think I've seen vapour-Xs in other people's builds.

Don't crossfire the cards. This can lead to problems and lower hashrates in Windoze and is not needed for mining. Crossfire doesn't seem to have an adverse effect on my linux box for some reason, but it isn't needed so there's no need to take the risk. If you want to use your rig for gaming as well as mining then just hook up the crossfire cables when you switch to gaming mode.

gooseta

newbie

Activity: 28

Merit: 0

The sapphire vapor cards seem to be the best for hashing... Agree/disagree?

gooseta

newbie

Activity: 28

Merit: 0

Quote from: mercSuey on July 17, 2013, 03:22:11 AM

Quote from: gooseta on July 17, 2013, 02:19:44 AM

Quote from: PoolMinor on July 17, 2013, 01:25:35 AM

Quote from: gooseta on July 16, 2013, 09:40:39 AM

Hi, guys. I have about £2500 to invest in litecoin rigs. One of the rigs is a replacement for my Sandy bridge rig and will be a gamer/miner, I will use it to game maybe 4 hours per month. The other rig is a cheap AMD platform. The haswell rig will run with my 7970, a 7950, and a 6950 I will purchase. The AMD build will run 4 7950s and a 6670 or super-budget card for displaying the screen w/o compromising the stability of the cards that are mining. Is it possible in cg miner or guiminer to only mine with four of the five Gpus I will have connected?

Here are the two builds, can they be improved?

Gamer/miner
I5-2500K
Gigabyte GA-Z68X-UD5
XFX 7970 (owned)
Sapphire vapor-x 7950
HIS or Sapphire 6950
Corsair HX1050 (owned)
Lian li T60
Optical drive, win7 h

Edit : updated build

The 7970 gives around 600kh/s, the 7950 should give around 600 too and the 6950 will get 400-450
Total hash rate : ~1600kh/s

AMD
Athlon ii x2 270
Gigabyte 990FXA-UD3
4gb ram
4x sapphire vapor-x 7950
6670 (to power display)
OCZ 1250W psu (might get a 1475w to be safe)
Optical drive, win7 hp
7950s will give around 600 each so 2500kh/s should be achievable. 6670 will give around 50kh/s should I decide to mine with it too.
Total hash rate : ~2500kh/s

Combined hash rate: ~ 4100kh/s

Thanks for your time!

You may want to rethink the Gigabyte 990FXA-UD3. I have one and it is difficult to mine with unless you are planning on using extenders, also the passive cooling on the board leaves virtually no space between the heat-sink on the board and one of the GPUs.

Why is it difficult to mine with? Also what am3/ am3+ board would you recommend for use with risers?

I'm glad someone mentioned mobo issue. I hate that mobo. I have about 10mh, about to be expanded to 15mh in a few weeks once I settle into my new home. You can't go wrong with MSI Z77G60. Except you'll have to change your processor to an Intel 1650, preferably an Ivy Bridge proc if you want that last PCIx16 to be active.

Will any ivb CPU work? I will check out the msi board and G2010

Edit : Can I crossfire the 5 Gpus? Edit : build updated

mercSuey

sr. member

Activity: 364

Merit: 250

Quote from: gooseta on July 17, 2013, 02:19:44 AM

Quote from: PoolMinor on July 17, 2013, 01:25:35 AM

Quote from: gooseta on July 16, 2013, 09:40:39 AM

Hi, guys. I have about £2500 to invest in litecoin rigs. One of the rigs is a replacement for my Sandy bridge rig and will be a gamer/miner, I will use it to game maybe 4 hours per month. The other rig is a cheap AMD platform. The haswell rig will run with my 7970, a 7950, and a 6950 I will purchase. The AMD build will run 4 7950s and a 6670 or super-budget card for displaying the screen w/o compromising the stability of the cards that are mining. Is it possible in cg miner or guiminer to only mine with four of the five Gpus I will have connected?

Here are the two builds, can they be improved?

Gamer/miner
I5-2500K
Gigabyte GA-Z68X-UD5
XFX 7970 (owned)
Sapphire vapor-x 7950
HIS or Sapphire 6950
Corsair HX1050 (owned)
Lian li T60
Optical drive, win7 h

Edit : updated build

The 7970 gives around 600kh/s, the 7950 should give around 600 too and the 6950 will get 400-450
Total hash rate : ~1600kh/s

AMD
Athlon ii x2 270
Gigabyte 990FXA-UD3
4gb ram
4x sapphire vapor-x 7950
6670 (to power display)
OCZ 1250W psu (might get a 1475w to be safe)
Optical drive, win7 hp
7950s will give around 600 each so 2500kh/s should be achievable. 6670 will give around 50kh/s should I decide to mine with it too.
Total hash rate : ~2500kh/s

Combined hash rate: ~ 4100kh/s

Thanks for your time!

You may want to rethink the Gigabyte 990FXA-UD3. I have one and it is difficult to mine with unless you are planning on using extenders, also the passive cooling on the board leaves virtually no space between the heat-sink on the board and one of the GPUs.

Why is it difficult to mine with? Also what am3/ am3+ board would you recommend for use with risers?

I'm glad someone mentioned mobo issue. I hate that mobo. I have about 10mh, about to be expanded to 15mh in a few weeks once I settle into my new home. You can't go wrong with MSI Z77G60. Except you'll have to change your processor to an Intel 1650, preferably an Ivy Bridge proc if you want that last PCIx16 to be active.

gooseta

newbie

Activity: 28

Merit: 0

Quote from: PoolMinor on July 17, 2013, 01:25:35 AM

Quote from: gooseta on July 16, 2013, 09:40:39 AM

Hi, guys. I have about £2500 to invest in litecoin rigs. One of the rigs is a replacement for my Sandy bridge rig and will be a gamer/miner, I will use it to game maybe 4 hours per month. The other rig is a cheap AMD platform. The haswell rig will run with my 7970, a 7950, and a 6950 I will purchase. The AMD build will run 4 7950s and a 6670 or super-budget card for displaying the screen w/o compromising the stability of the cards that are mining. Is it possible in cg miner or guiminer to only mine with four of the five Gpus I will have connected?

Here are the two builds, can they be improved?

Gamer/miner
I5-2500K
Gigabyte GA-Z68X-UD5
XFX 7970 (owned)
Sapphire vapor-x 7950
HIS or Sapphire 6950
Corsair HX1050 (owned)
Lian li T60
Optical drive, win7 h

Edit : updated build

The 7970 gives around 600kh/s, the 7950 should give around 600 too and the 6950 will get 400-450
Total hash rate : ~1600kh/s

AMD
Athlon ii x2 270
Gigabyte 990FXA-UD3
4gb ram
4x sapphire vapor-x 7950
6670 (to power display)
OCZ 1250W psu (might get a 1475w to be safe)
Optical drive, win7 hp
7950s will give around 600 each so 2500kh/s should be achievable. 6670 will give around 50kh/s should I decide to mine with it too.
Total hash rate : ~2500kh/s

Combined hash rate: ~ 4100kh/s

Thanks for your time!

You may want to rethink the Gigabyte 990FXA-UD3. I have one and it is difficult to mine with unless you are planning on using extenders, also the passive cooling on the board leaves virtually no space between the heat-sink on the board and one of the GPUs.

Why is it difficult to mine with? Also what am3/ am3+ board would you recommend for use with risers?

PoolMinor

legendary

Activity: 1843

Merit: 1338

XXXVII Fnord is toast without bread

Quote from: gooseta on July 16, 2013, 09:40:39 AM

Hi, guys. I have about £2500 to invest in litecoin rigs. One of the rigs is a replacement for my Sandy bridge rig and will be a gamer/miner, I will use it to game maybe 4 hours per month. The other rig is a cheap AMD platform. The haswell rig will run with my 7970, a 7950, and a 6950 I will purchase. The AMD build will run 4 7950s and a 6670 or super-budget card for displaying the screen w/o compromising the stability of the cards that are mining. Is it possible in cg miner or guiminer to only mine with four of the five Gpus I will have connected?

Here are the two builds, can they be improved?

Gamer/miner
I5-2500K
Gigabyte GA-Z68X-UD5
XFX 7970 (owned)
Sapphire vapor-x 7950
HIS or Sapphire 6950
Corsair HX1050 (owned)
Lian li T60
Optical drive, win7 h

Edit : updated build

The 7970 gives around 600kh/s, the 7950 should give around 600 too and the 6950 will get 400-450
Total hash rate : ~1600kh/s

AMD
Athlon ii x2 270
Gigabyte 990FXA-UD3
4gb ram
4x sapphire vapor-x 7950
6670 (to power display)
OCZ 1250W psu (might get a 1475w to be safe)
Optical drive, win7 hp
7950s will give around 600 each so 2500kh/s should be achievable. 6670 will give around 50kh/s should I decide to mine with it too.
Total hash rate : ~2500kh/s

Combined hash rate: ~ 4100kh/s

Thanks for your time!

You may want to rethink the Gigabyte 990FXA-UD3. I have one and it is difficult to mine with unless you are planning on using extenders, also the passive cooling on the board leaves virtually no space between the heat-sink on the board and one of the GPUs.

gooseta

newbie

Activity: 28

Merit: 0

Ok, Which brand of 7950s should I get

Builds updated

jlsminingcorp

hero member

Activity: 493

Merit: 500

Hooray for non-equilibrium thermodynamics!

Agreed, 7950s offer good MH/s/$ and run fairly cool. Some manufacturers' cards seem to run better than others. Gigabyte HD7950 Windforce 3 OCs are running nicely for us.

crazyates

legendary

Activity: 952

Merit: 1000

I have a hard time recommending 6xxx cards for anything. Those 7xxx cards use way less power for the same KH/s, and are even better when undervolted.

gooseta

newbie

Activity: 28

Merit: 0

Quote from: malevolent on July 16, 2013, 10:27:24 AM

Quote from: gooseta on July 16, 2013, 09:40:39 AM

Is it possible in cg miner or guiminer to only mine with four of the five Gpus I will have connected?

Yes.

As for the builds you can make it cheaper by running some live usb linux flavor (e.g. Debian) as the OS, so no need for the drive and win7.

You can also save by using a dual core and a cheaper mobo (different socket), if you're gaming for only 4h a month do you really need a good cpu?

No need to buy a case too, more money saved.

I've never used Linux but maybe I'll try it. Maybe I will keep my 2500k, and get a gigabyte z68x ud5, I could add another 6950 with the money...

malevolent

legendary

Activity: 3472

Merit: 1724

Quote from: gooseta on July 16, 2013, 09:40:39 AM

Is it possible in cg miner or guiminer to only mine with four of the five Gpus I will have connected?

Yes.

As for the builds you can make it cheaper by running some live usb linux flavor (e.g. Debian) as the OS, so no need for the drive and win7.

You can also save by using a dual core and a cheaper mobo (different socket), if you're gaming for only 4h a month do you really need a good cpu?

No need to buy a case too, more money saved.

gooseta

newbie

Activity: 28

Merit: 0

Hi, guys. I have about £2500 to invest in litecoin rigs. One of the rigs is a replacement for my Sandy bridge rig and will be a gamer/miner, I will use it to game maybe 4 hours per month. The other rig is a cheap AMD platform. The haswell rig will run with my 7970, a 7950, and a 6950 I will purchase. The AMD build will run 4 7950s and a 6670 or super-budget card for displaying the screen w/o compromising the stability of the cards that are mining. Is it possible in cg miner or guiminer to only mine with four of the five Gpus I will have connected?

Here are the two builds, can they be improved?

Gamer/miner
I5-2500K
Gigabyte G1.Sniper2 (owned)
XFX 7970 (owned)
HIS or Sapphire 6950
Corsair HX1050 (owned)
Lian li T60
Optical drive, win7 h

Edit : updated build

The 7970 gives around 600kh/s, and the 6950 will get 400-450
Total hash rate : ~1000kh/s

AMD
Pentium G2010
Msi z77g65
4gb ram
5x sapphire vapor-x 7950
6670 (to power display)
Thermaltake 1475w psu
Optical drive, win7 hp
7950s will give around 600 each so 3000kh/s should be achievable. 6670 will give around 50kh/s should I decide to mine with it too.
Total hash rate : ~3000kh/s

Combined hash rate: ~ 4000kh/s

Thanks for your time!

Edit :builds updated

Topic: Finalising 4000kh/s+ Builds - page 2. (Read 2741 times)