this monday or next monday?
This Monday. As in today.
Topic: [FINISHED] #15 ASICMiner Erupter USB - .55 btc 2000+ shipping - page 4. (Read 10608 times)
This Monday. As in today.
philipma1957 ; 6; 3.30 btc 1Fo2K52Rz7LZw9fcF5BDdDBjfNaViQ8J3x
brings me to 12 for 6.60 btc
note the transfer is hung up.
coin base sent the coins I transferred to my wallet and they have given me a pending notice .
see below:
Why is my bitcoin transfer "Pending"?
Last Updated: May 15, 2013 07:04PM PDT
Bitcoin transactions show up in your account almost instantly (just a few seconds) but stay "Pending" for about one hour until they are verified by the network. Once a transaction is verified, it will show "Complete" in green. This lets you know that the transaction cannot be reversed and that the funds can be withdrawn.
Due to a certain degree of randomness, sometimes pending transactions aren't picked up by the bitcoin blockchain as quickly as usual. The transaction should go through eventually - if it doesn't for 24 hours it will be automatically cancelled and you can re-initiate it.
If you're wondering about a pending bitcoin purchase, you can read more here.
Never had this from them until today. Has Any body ever had this happen?
brings me to 12 for 6.60 btc
note the transfer is hung up.
coin base sent the coins I transferred to my wallet and they have given me a pending notice .
see below:
Why is my bitcoin transfer "Pending"?
Last Updated: May 15, 2013 07:04PM PDT
Bitcoin transactions show up in your account almost instantly (just a few seconds) but stay "Pending" for about one hour until they are verified by the network. Once a transaction is verified, it will show "Complete" in green. This lets you know that the transaction cannot be reversed and that the funds can be withdrawn.
Due to a certain degree of randomness, sometimes pending transactions aren't picked up by the bitcoin blockchain as quickly as usual. The transaction should go through eventually - if it doesn't for 24 hours it will be automatically cancelled and you can re-initiate it.
If you're wondering about a pending bitcoin purchase, you can read more here.
Never had this from them until today. Has Any body ever had this happen?
Yes, I've had a coinbase transaction pending between them and my wallet for 8 hours before, despite the "instant purchase". No clue what happens, but eventually the tx shows up on the blockchain.
this monday or next monday?
philipma1957 ; 6; 3.30 btc 1Fo2K52Rz7LZw9fcF5BDdDBjfNaViQ8J3x
brings me to 12 for 6.60 btc
tax id
https://blockchain.info/tx/9cf1e4bf7f0c726e86bc909ee9e66ad484c91a9abc6ab1252b1c33724ffab8f7
transferred from coinbase came in!
note the transfer is hung up.
coin base sent the coins I transferred to my wallet and they have given me a pending notice .
see below:
Why is my bitcoin transfer "Pending"?
Last Updated: May 15, 2013 07:04PM PDT
Bitcoin transactions show up in your account almost instantly (just a few seconds) but stay "Pending" for about one hour until they are verified by the network. Once a transaction is verified, it will show "Complete" in green. This lets you know that the transaction cannot be reversed and that the funds can be withdrawn.
Due to a certain degree of randomness, sometimes pending transactions aren't picked up by the bitcoin blockchain as quickly as usual. The transaction should go through eventually - if it doesn't for 24 hours it will be automatically cancelled and you can re-initiate it.
If you're wondering about a pending bitcoin purchase, you can read more here.
Never had this from them until today. Has Any body ever had this happen?
brings me to 12 for 6.60 btc
tax id
https://blockchain.info/tx/9cf1e4bf7f0c726e86bc909ee9e66ad484c91a9abc6ab1252b1c33724ffab8f7
transferred from coinbase came in!
note the transfer is hung up.
coin base sent the coins I transferred to my wallet and they have given me a pending notice .
see below:
Why is my bitcoin transfer "Pending"?
Last Updated: May 15, 2013 07:04PM PDT
Bitcoin transactions show up in your account almost instantly (just a few seconds) but stay "Pending" for about one hour until they are verified by the network. Once a transaction is verified, it will show "Complete" in green. This lets you know that the transaction cannot be reversed and that the funds can be withdrawn.
Due to a certain degree of randomness, sometimes pending transactions aren't picked up by the bitcoin blockchain as quickly as usual. The transaction should go through eventually - if it doesn't for 24 hours it will be automatically cancelled and you can re-initiate it.
If you're wondering about a pending bitcoin purchase, you can read more here.
Never had this from them until today. Has Any body ever had this happen?
can i run cgminer command for gpu at first and then run bfgminer for usb eruptors using -g command?
ryanb; 18; 9.9 ; 193Zy9brTzoNRuSX2Hdvd9XTAaUYYwE2xQ
Message H50TO6wlm0LyiEh6w8eSsiYNRtLDoM5+5X5Fi4QxIoFC9I4T2Y5WvQk82XySyJ1Eh4cQQBZxTvUxRd/m4uAkzis=
added 18 to my first order of 25 please ship together if possible on monday
Message H50TO6wlm0LyiEh6w8eSsiYNRtLDoM5+5X5Fi4QxIoFC9I4T2Y5WvQk82XySyJ1Eh4cQQBZxTvUxRd/m4uAkzis=
added 18 to my first order of 25 please ship together if possible on monday
lorp; 1; .55; 1K2Qqjr5WU8phJVEqUXacsh84zxmaG5TzC
And an AiTech 10port, with 4A power supply:
http://www.amazon.com/gp/product/B009NESU4M
Feedback from anyone that's tried any of these is appreciated!
AiTech 10 port case looks similar/identical to Juiced hub, different name only (branding)?http://www.amazon.com/gp/product/B009NESU4M
Feedback from anyone that's tried any of these is appreciated!
once you get AiTech going, please post a review on the USB HUB thread!
I have the silver version of the aitech it appears identical to the anker which I also have. both work fine they handle 10 sticks with no issues. I use this fan
http://www.amazon.com/Thermaltake-Mobile-External-Cooling-AF0007/dp/B002OJN250/ref=sr_1_2?ie=UTF8&qid=1375096847&sr=8-2&keywords=thermaltake+usb
I have 3 hubs with 2 fans running 27 sticks stable 0 issues about 9gh total system uses 127 watts. When I power off the monitor. As I have a full sized pc.
I have this one on order
http://www.amazon.com/gp/product/B00B59BFVI/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1 only 7 ports
http://www.amazon.com/gp/product/B005NGQWL2/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1 I have this one in hand. this is very tight spacing I am thinking I won't test it.
I have 3 coins coming from coin base in 1 hour 30 minutes or so they say.
I would like to buy 6 more at .55 total of 3.3 coins. I ordered 6 at .55 already. My coins are due at 8:47 am east cost time it is now 7:26 am east coast time. Ty
SigurdDragonslayer; 1; .55; 1BxZALhDQrzQ9VVkfMWKRx35Sw8T2aHPP1
I use Raspbian and it's been 100% rock solid, not sure where this rumour is from, but im on the latest verson too.
Not a rumor, Kano from cgminer is collecting data on it now if you want to help out an participate;-
https://bitcointalksearch.org/topic/m.2817682
And an AiTech 10port, with 4A power supply:
http://www.amazon.com/gp/product/B009NESU4M
Feedback from anyone that's tried any of these is appreciated!
AiTech 10 port case looks similar/identical to Juiced hub, different name only (branding)?http://www.amazon.com/gp/product/B009NESU4M
Feedback from anyone that's tried any of these is appreciated!
once you get AiTech going, please post a review on the USB HUB thread!
Since your using a RPi try to stay clear of raspberian. It has a wonky install of libusb that has been causing problems. Arch Linux has been verified as working.
I use Raspbian and it's been 100% rock solid, not sure where this rumour is from, but im on the latest verson too.
about 250 miners left as of now to make it into Monday's shipping
friedcat shipped another large batch to me today as well.
everyone who has sent payment so far is in Monday's batch
friedcat shipped another large batch to me today as well.
everyone who has sent payment so far is in Monday's batch
west17m; 6; 3.3; 1HuJdjT2WjsUxcqmSTX9p5VdQbipMveVcR
add 8 more, now
west17m; 14; 7.7; 1HuJdjT2WjsUxcqmSTX9p5VdQbipMveVcR
Feedback from anyone that's tried any of these is appreciated!
I bought the Juiced 10-port from Amazon and suggest getting something else. It'll run 8 erupters but when you plug in a 9th it starts to lose contact with one, then another, then another and the only way to fix that is either restart cgminer or unplug/replug the miner. The Anker's extra amp makes a big difference.
Adding insult to injury my Raspberry Pi can't see this hub at all, so I think I'm going to order the Anker from Amazon and return this one.
snipped*
https://bitcointalk.org/index.php?topic=220905.280
http://elinux.org/RPi_VerifiedPeripherals#Powered_USB_Hubs
are you still selling the anker hubs? i can't even find the 10 port ones on amazon at this point 
nope, they stopped making them...Juiced is what you can use in it's place but you may need to put more airflow on that one
I've decided to try these two:
Anker 9port +1 charging (maybe 9 devices and 1 fan?), with 5A power supply:
http://www.amazon.com/gp/product/B005NGQWL2
And an AiTech 10port, with 4A power supply:
http://www.amazon.com/gp/product/B009NESU4M
I'm also finally going to go for a RPi. So will be testing 4 diff. 10 port hubs on it. (Roswill, the old Anker (which I hear works), the new Anker, and the AiTech).
Feedback from anyone that's tried any of these is appreciated!
I bought the Juiced 10-port from Amazon and suggest getting something else. It'll run 8 erupters but when you plug in a 9th it starts to lose contact with one, then another, then another and the only way to fix that is either restart cgminer or unplug/replug the miner. The Anker's extra amp makes a big difference.
Adding insult to injury my Raspberry Pi can't see this hub at all, so I think I'm going to order the Anker from Amazon and return this one.
visdude; 1; 0.55; 1AjQVZFmFRnwzomJPcAHBZhZoNUxPgTAqG
Krellan; 8; 4.4; 1u9AnCrajNbKNCmMc6jmVAM73VVjmkn6N
Nice, great price!
I remember nervously buying my first Erupter at over 2.2 BTC *each*... wow, times have changed!
Nice, great price!
I remember nervously buying my first Erupter at over 2.2 BTC *each*... wow, times have changed!
And an AiTech 10port, with 4A power supply:
http://www.amazon.com/gp/product/B009NESU4M
Feedback from anyone that's tried any of these is appreciated!
AiTech 10 port case looks similar/identical to Juiced hub, different name only (branding)?http://www.amazon.com/gp/product/B009NESU4M
Feedback from anyone that's tried any of these is appreciated!
once you get AiTech going, please post a review on the USB HUB thread!
Since your using a RPi try to stay clear of raspberian. It has a wonky install of libusb that has been causing problems. Arch Linux has been verified as working.
And an AiTech 10port, with 4A power supply:
http://www.amazon.com/gp/product/B009NESU4M
Feedback from anyone that's tried any of these is appreciated!
AiTech 10 port case looks similar/identical to Juiced hub, different name only (branding)?http://www.amazon.com/gp/product/B009NESU4M
Feedback from anyone that's tried any of these is appreciated!
once you get AiTech going, please post a review on the USB HUB thread!
I've been thinking of getting a few of this device. Though I've been mining for a year now, I've been relying on GUIMiner to run my GPUs (which have worked well for me) just because I'm CLI-challenged and dread the thought of it (cgiminer, bfgminer, etc.). Is there an instruction or tutorial somewhere on how to setup these babies that I can peruse beforehand and see if I'm up to the challenge? 
bfgminer is super easy. so is cgminerrun "bfgminer.exe -G -S all" that's it... -G is to ignore GPUs if you wish to run on the same box and keep using GUIminer for GPUs.
see this page here: http://eligius.st/~gateway/products/block-erupter-sapphire
before running bfgminer, install the driver listed on the above link
Jump to: