[FIXED] My both Antminers stopped working !!!

Xian01

legendary

Activity: 1652

Merit: 1067

Christian Antkow

Quote from: gmaxwell on December 27, 2013, 03:42:28 AM

You've been misinformed. The GPU comment was a "what the heck do you _think_ is mining on P2Pool", and yes, I was laughing at people's capacity to buy into FUD and misinformation. Don't take it too personally.

The issue with higher-than-desired rate of stale shares has been resolved with P2pool ?

Sorry for the derail, but it was my understanding that you will lose close to 1% of your work to stales on p2pool vs ~0.1% stales on other pools.

Is that no longer the case ?

ineedit

sr. member

Activity: 252

Merit: 250

Quote from: turtle83 on December 27, 2013, 04:43:57 AM

Quote from: gmaxwell on December 26, 2013, 11:48:36 PM

I've been nagging them to post their firmware sources since they started shipping products so I could fix it and I guess they've been too busy.

Is that not a violation of GPL? Both cgminer and openwrt are GPL'd...

Good luck with someone suing them through the Chinese courts Wink

turtle83

sr. member

Activity: 322

Merit: 250

Supersonic

Quote from: gmaxwell on December 26, 2013, 11:48:36 PM

I've been nagging them to post their firmware sources since they started shipping products so I could fix it and I guess they've been too busy.

Is that not a violation of GPL? Both cgminer and openwrt are GPL'd...

gmaxwell

staff

Activity: 4172

Merit: 8419

Quote from: Xian01 on December 27, 2013, 12:17:59 AM

I said nothing about GPU's. I was referring to anecdotes I have heard that mining with ASIC's on P2Pool was not optimal vs other pools.
Thanks for the LOL. Helpful and classy.

You've been misinformed. The GPU comment was a "what the heck do you _think_ is mining on P2Pool", and yes, I was laughing at people's capacity to buy into FUD and misinformation. Don't take it too personally.

Xian01

legendary

Activity: 1652

Merit: 1067

Christian Antkow

Quote from: gmaxwell on December 26, 2013, 11:48:36 PM

Quote from: Xian01 on December 26, 2013, 01:57:30 PM

and P2Pool is not optimal for ASICs IIRC :|

LOL. You think P2Pool has 150 TH/s of ... GPUs? Tongue

I said nothing about GPU's. I was referring to anecdotes I have heard that mining with ASIC's on P2Pool was not optimal vs other pools.

Thanks for the LOL. Helpful and classy.

smooth

legendary

Activity: 2968

Merit: 1198

Quote from: gmaxwell on December 26, 2013, 11:48:36 PM

Quote from: Xian01 on December 26, 2013, 01:57:30 PM

and P2Pool is not optimal for ASICs IIRC :|

LOL. You think P2Pool has 150 TH/s of ... GPUs? Tongue

P2Pool works absolutely fantastically on most asics. My avlons are at about 115% PPS on P2pool (both from reviving fees and because p2pool appears to do better than expected, potentially because of the faster block relaying giving it an advantage over other pools).

Sadly, the little CPUs on the antminers combined with their old cgminer version is absolutely taxed beyond belief, and they don't work fantastically on P2Pool right now— stale rate roughly 5x the avalons. I've been nagging them to post their firmware sources since they started shipping products so I could fix it and I guess they've been too busy.

They apparently bumped the version of cgminer in their latest firmware. I haven't tried with p2pool yet though.

gmaxwell

staff

Activity: 4172

Merit: 8419

Quote from: Xian01 on December 26, 2013, 01:57:30 PM

and P2Pool is not optimal for ASICs IIRC :|

LOL. You think P2Pool has 150 TH/s of ... GPUs? Tongue

P2Pool works absolutely fantastically on most asics. My avlons are at about 115% PPS on P2pool (both from reviving fees and because p2pool appears to do better than expected, potentially because of the faster block relaying giving it an advantage over other pools).

Sadly, the little CPUs on the antminers combined with their old cgminer version is absolutely taxed beyond belief, and they don't work fantastically on P2Pool right now— stale rate roughly 5x the avalons. I've been nagging them to post their firmware sources since they started shipping products so I could fix it and I guess they've been too busy.

rammy2k2

legendary

Activity: 1974

Merit: 1003

Quote from: Xian01 on December 26, 2013, 01:57:30 PM

Quote from: klondike_bar on December 26, 2013, 12:41:44 PM

you realise that you left the 30% network hashrate pool for the 25% network hashrate pool? It would be much better to move hashrate to pools like slush's or elegius or p2pool

Slush doesn't have the "bells and whistles" I enjoy, have ideological issues with Luke-Jr/Eligius that prevents me from mining there, and P2Pool is not optimal for ASICs IIRC :|

Tried Bitminter for a couple months, but did not provide me the stats/graphs that I enjoy dorking out over.

BTCG has always been solid for me and I appreciate how active Eleuthria is in the community.

too high fees for me ...

Xian01

legendary

Activity: 1652

Merit: 1067

Christian Antkow

Quote from: klondike_bar on December 26, 2013, 12:41:44 PM

you realise that you left the 30% network hashrate pool for the 25% network hashrate pool? It would be much better to move hashrate to pools like slush's or elegius or p2pool

Slush doesn't have the "bells and whistles" I enjoy, have ideological issues with Luke-Jr/Eligius that prevents me from mining there, and P2Pool is not optimal for ASICs IIRC :|

Tried Bitminter for a couple months, but did not provide me the stats/graphs that I enjoy dorking out over.

BTCG has always been solid for me and I appreciate how active Eleuthria is in the community.

rammy2k2

legendary

Activity: 1974

Merit: 1003

Quote from: klondike_bar on December 26, 2013, 11:01:35 AM

Ghash.io decided to change the stratum addresses (or more specifically, turn off nl1.ghash.io:3334) overnight. I woke up to angrily beeping antminers as well and it took me a few minutes of antminer rebooti, router reboot, modem reboot, and then looking at the ghash.io frontpage.

for such a massive pool, they have some of the most terrible client support you can imagine. This is not the first time they have [seemingly] arbitrarily changed the ports or addresses to connect stratum users, not to mention at least 30minutes-1hour of downtime every day

thats what happened to me, i freaked out with those beeps Cheesy

klondike_bar

legendary

Activity: 2114

Merit: 1005

ASIC Wannabe

Quote from: Xian01 on December 26, 2013, 11:40:00 AM

GHash.io has surpassed 30% network hash rate. I might recommend people move to other pools. I've stopped mining at ghash and have returned to btcg FWIW.

you realise that you left the 30% network hashrate pool for the 25% network hashrate pool? It would be much better to move hashrate to pools like slush's or elegius or p2pool

Xian01

legendary

Activity: 1652

Merit: 1067

Christian Antkow

GHash.io has surpassed 30% network hash rate. I might recommend people move to other pools. I've stopped mining at ghash and have returned to btcg FWIW.

klondike_bar

legendary

Activity: 2114

Merit: 1005

ASIC Wannabe

Ghash.io decided to change the stratum addresses (or more specifically, turn off nl1.ghash.io:3334) overnight. I woke up to angrily beeping antminers as well and it took me a few minutes of antminer rebooti, router reboot, modem reboot, and then looking at the ghash.io frontpage.

for such a massive pool, they have some of the most terrible client support you can imagine. This is not the first time they have [seemingly] arbitrarily changed the ports or addresses to connect stratum users, not to mention at least 30minutes-1hour of downtime every day

rammy2k2

legendary

Activity: 1974

Merit: 1003

Quote from: Easy2Mine on December 26, 2013, 07:55:18 AM

You didn't setup backup pool?
You will loose btc once in a while if you don't have a backup pool.
All pools like to DDOS each other, we are talking about big money.

yea, i didnt, words of the day "BACKUP POOLS"

Easy2Mine

hero member

Activity: 854

Merit: 500

einc.io

You didn't setup backup pool?
You will loose btc once in a while if you don't have a backup pool.
All pools like to DDOS each other, we are talking about big money.

rammy2k2

legendary

Activity: 1974

Merit: 1003

ok, things are fixed, looks like it as only ghahs.io fault ... their NL server is dead , thanks everyboy for the help !!!

elasticband

legendary

Activity: 1036

Merit: 1000

Nighty Night Don't Let The Trolls Bite Nom Nom Nom

can offer you some Team viewer help

were you wired or wirless connection?

the fact you can still connect to them is positive

r7970

newbie

Activity: 43

Merit: 0

What brand and model power supply are you using?

rammy2k2

legendary

Activity: 1974

Merit: 1003

same stuff with only 1 miner .. i can connect to it ... no mining Cry

rammy2k2

legendary

Activity: 1974

Merit: 1003

Quote from: xstr8guy on December 26, 2013, 07:07:30 AM

Cheap or underpowered PSU perhaps?

no, 1000W PSU, and not cheap, they runned just fine for about 1 week. ill power up just one, to see whats up

Topic: [FIXED] My both Antminers stopped working !!! (Read 2452 times)