Pages:
Author

Topic: For Nvidia GPU miners on ETH, why using Phoenix miner instead of T-Rex miner? (Read 396 times)

hero member
Activity: 2492
Merit: 761
I run a 2.6Ghz farm. Phoenix is my miner of choice due to stability. I have tried Trex but frequent crashes left me with too many outages. I haven't used GMiner so I can't speak to the efficacy of their software.
Try to use it. Gminer is the best miner as for me. The most stable and gives the best hashrate. Phoenix gives less hash then T-rex and Gminer. And if T-rex have some problems with stability, Gminer - have no problems.
full member
Activity: 626
Merit: 159
I run a 2.6Ghz farm. Phoenix is my miner of choice due to stability. I have tried Trex but frequent crashes left me with too many outages. I haven't used GMiner so I can't speak to the efficacy of their software.
member
Activity: 192
Merit: 11
TRM doesn't work  with the green card  that I have in the same rig. And its 1 % so more than LoL
But you are right for rustpool, may be its better than shardpool ( haven't  tested yet), but both are much better then ezil

I know that TRM is only for AMD -> but that was not the message. Use T-Rex miner and only rustpool direct -> give more than lolminer with 2 connections -> because the switch needs to much time and hashrate is shortly decreased -> only mining direct over the rustpool proxy give more overall hashrate.

Pheonix Miner is junk with 2000/3000 series Nvidia cards.

IMHO T-rex is good, but use Gminer. Gminer has been extremely stable for me and only 0.65% DevFee on ETH.

Let me know Xazax310 if you got better hash rate for ETH than that on Gminer:

1660 Super: 31.82 MH/s
3070: 62.37 MH/s

Hey GMiner it's 2% dev fee not 0.65%.
https://cryptomining-blog.com/tag/gminer-nvidia/#:~:text=Do%20note%20that%20GMiner%20is,higher%20than%202%25%20as%20well!

Lol you see the screenshot on your link? How much fee you see in this picture? Right 0.65% for ethash!!!! Read carefully next time. Don´t use such outdated sites like cryptomining-blog and look at the developers page if you don´t know the right fee!!!!!

My bad! I have been typing quickly on Google "GMiner dev fee" and got a quick answer without having to go into the website. Thank you for correcting me sxemini.
member
Activity: 192
Merit: 11
I've tried Trex and phoenix miner and I can say that their performance on ETH algorithm isn't that differ, for some cards like gtx1660 super the outcome performance is the same so it's a matter of choice for anyone, the two mining software are good enough

For me on HiveOS for one 1660s, when I switched from Phoenix miner to T-Rex miner, if I remember well I gained something like +1 MH/s on ETH.

It seems that many people mine on Windows. It's so not optimal...
member
Activity: 192
Merit: 11
Didz, I am around 61 but with 108 watts because Kwh cost here is 30 cents!
 

OMG 30 cents per Kw/h, where are you California? Here in Québec we are at 8.8 cents per Kw/h from 100% green energy source.

I installed a massive commercial AC Mitsubishi in my garage, I keep the temperature always at 23 degrees celsius (73 fahrenheit for people in the US). At 30 cents per Kw/h the AC would become sooo expensive. My AC cost me in average 4 CAD/day.
member
Activity: 1558
Merit: 69
TRM doesn't work  with the green card  that I have in the same rig. And its 1 % so more than LoL
But you are right for rustpool, may be its better than shardpool ( haven't  tested yet), but both are much better then ezil

I know that TRM is only for AMD -> but that was not the message. Use T-Rex miner and only rustpool direct -> give more than lolminer with 2 connections -> because the switch needs to much time and hashrate is shortly decreased -> only mining direct over the rustpool proxy give more overall hashrate.

Pheonix Miner is junk with 2000/3000 series Nvidia cards.

IMHO T-rex is good, but use Gminer. Gminer has been extremely stable for me and only 0.65% DevFee on ETH.

Let me know Xazax310 if you got better hash rate for ETH than that on Gminer:

1660 Super: 31.82 MH/s
3070: 62.37 MH/s

Hey GMiner it's 2% dev fee not 0.65%.
https://cryptomining-blog.com/tag/gminer-nvidia/#:~:text=Do%20note%20that%20GMiner%20is,higher%20than%202%25%20as%20well!

Lol you see the screenshot on your link? How much fee you see in this picture? Right 0.65% for ethash!!!! Read carefully next time. Don´t use such outdated sites like cryptomining-blog and look at the developers page if you don´t know the right fee!!!!!
hero member
Activity: 2492
Merit: 761
Mostly, you have to test every new version of miner because some small changes can increase your hashrate. But as i tested - the difference between 1 and 2 place are so small. that it does not matter. But it was Gminer and T-rex. The Phoenix miner has lower hashrate, when i tested - it was 2-3%.
member
Activity: 120
Merit: 15
I've tried Trex and phoenix miner and I can say that their performance on ETH algorithm isn't that differ, for some cards like gtx1660 super the outcome performance is the same so it's a matter of choice for anyone, the two mining software are good enough
member
Activity: 476
Merit: 19
Didz, I am around 61 but with 108 watts because Kwh cost here is 30 cents!
 
member
Activity: 192
Merit: 11
I think that the people learned Phoenix and simply some of them keep using it.

Regarding the 2miner test its an old one from february  and with a very weird test approach , as they use  a "special pool" with very low difficulty 136x lower . That is slighty different from the real condition.

In real mining I choose to use LOLminer simply because its the only one that give you the chance using two different stratum so, I can mine eth + zil without interruption in 2 miners eth  + shardpool zil .

That are , on my view and with the card that I use, the best paying pools.

The alternative is to use Trex and TRM and mining in Ezil, but I found that I make much more Zil (2x) with LOL in 2miners+shardpool.

I tried mining using the stratum passthrough with other miners rather than LOL, but sometimes the passthrough of the pool doesn't work well.

On my small sample 3 mixed rigs, the slower card benefit more than the 3070 in term of number of Zil shares hitted during the zil session.
 
 .


skablast with your 3070 how many MH/s on ETH you do with your dual mining set up?
member
Activity: 192
Merit: 11
Pheonix Miner is junk with 2000/3000 series Nvidia cards.

IMHO T-rex is good, but use Gminer. Gminer has been extremely stable for me and only 0.65% DevFee on ETH.

Let me know Xazax310 if you got better hash rate for ETH than that on Gminer:

1660 Super: 31.82 MH/s
3070: 62.37 MH/s

Hey GMiner it's 2% dev fee not 0.65%.
https://cryptomining-blog.com/tag/gminer-nvidia/#:~:text=Do%20note%20that%20GMiner%20is,higher%20than%202%25%20as%20well!
member
Activity: 192
Merit: 11
Pheonix Miner is junk with 2000/3000 series Nvidia cards.

IMHO T-rex is good, but use Gminer. Gminer has been extremely stable for me and only 0.65% DevFee on ETH.

Let me know Xazax310 if you got better hash rate for ETH than that on Gminer:

1660 Super: 31.82 MH/s
3070: 62.37 MH/s
member
Activity: 476
Merit: 19
TRM doesn't work  with the green card  that I have in the same rig. And its 1 % so more than LoL
But you are right for rustpool, may be its better than shardpool ( haven't  tested yet), but both are much better then ezil
member
Activity: 1558
Merit: 69
I think that the people learned Phoenix and simply some of them keep using it.

Regarding the 2miner test its an old one from february  and with a very weird test approach , as they use  a "special pool" with very low difficulty 136x lower . That is slighty different from the real condition.

In real mining I choose to use LOLminer simply because its the only one that give you the chance using two different stratum so, I can mine eth + zil without interruption in 2 miners eth  + shardpool zil .

That are , on my view and with the card that I use, the best paying pools.

The alternative is to use Trex and TRM and mining in Ezil, but I found that I make much more Zil (2x) with LOL in 2miners+shardpool.

I tried mining using the stratum passthrough with other miners rather than LOL, but sometimes the passthrough of the pool doesn't work well.

On my small sample 3 mixed rigs, the slower card benefit more than the 3070 in term of number of Zil shares hitted during the zil session.
 
 .


Teamred has the same function to mine direct to eth pool and second to zil -> but direct over zil proxy give more hashrate, because they switch fast than the miner with 2 stratum connections. This is the result of my tests.
And most zil you get with rustpool, many can confirm this.
member
Activity: 476
Merit: 19
I think that the people learned Phoenix and simply some of them keep using it.

Regarding the 2miner test its an old one from february  and with a very weird test approach , as they use  a "special pool" with very low difficulty 136x lower . That is slighty different from the real condition.

In real mining I choose to use LOLminer simply because its the only one that give you the chance using two different stratum so, I can mine eth + zil without interruption in 2 miners eth  + shardpool zil .

That are , on my view and with the card that I use, the best paying pools.

The alternative is to use Trex and TRM and mining in Ezil, but I found that I make much more Zil (2x) with LOL in 2miners+shardpool.

I tried mining using the stratum passthrough with other miners rather than LOL, but sometimes the passthrough of the pool doesn't work well.

On my small sample 3 mixed rigs, the slower card benefit more than the 3070 in term of number of Zil shares hitted during the zil session.
 
 .
legendary
Activity: 1806
Merit: 1116
https://2miners.com/blog/best-ethereum-mining-software-for-nvidia-and-amd/
"The only open-source mining software Ethminer came third. It doesn’t charge a developer’s fee, so hashrates in the program and in the pool are almost identical with a 0.01% difference. As you can see, if mining software is free, it doesn’t mean that you get more profit. If you choose Gminer or T-rex, you gain more."
member
Activity: 246
Merit: 24
Pheonix Miner is junk with 2000/3000 series Nvidia cards.

IMHO T-rex is good, but use Gminer. Gminer has been extremely stable for me and only 0.65% DevFee on ETH.
member
Activity: 192
Merit: 11
I have the same doubt with AMD cards, why do they use phoenix instead of teamredminer.

As for most common replies,
  • Built in clock control
  • AMD and Nvidia support
  • Higher Hashrate, this is the crazy part, phoenix displays a higher hashrate than trm and trex, but way slower pool side, but i guess to the causal miner it doesnt matter !!

With my NVidia cards 1660s and 3070, I have higher hash rate with T-Rex miner compared to Phoenix miner.
member
Activity: 192
Merit: 11
I was using phoenix miner with no problems, I bought a 3060 ti though and it was completely unstable on Phoenix.  Switching over to T-Rex solved it.

Exactly! I don't understand why Phoenix miner is the most popular miner software for GPU ETH. One of the developper of Phoenix miner I saw his ETH address, he was making 30,000 $ per day! It was one month ago so maybe today he is making 20,000$ per day, crazy.
member
Activity: 204
Merit: 10
I have the same doubt with AMD cards, why do they use phoenix instead of teamredminer.

As for most common replies,
  • Built in clock control
  • AMD and Nvidia support
  • Higher Hashrate, this is the crazy part, phoenix displays a higher hashrate than trm and trex, but way slower pool side, but i guess to the causal miner it doesnt matter !!
Pages:
Jump to: