Pages:
Author

Topic: [FRSH] FreshCoin | Freshcoin for 1$ into game | LOW ALGO | POM | FRESH online!* - page 22. (Read 334848 times)

hero member
Activity: 693
Merit: 500
My only interest for a better performance is because my cards die I want to keep my hashrate, just that .... If you look at my post you will see that I released one groeslt version I made pasting bits of code that I was improved. ... and it worked, I used one week alone and then wanted to "donate" because I saw in another thread was sold (5 minutes after my announcement, also donated and is currently the principal involved in the development, with nothing to change)

They gave me some clues, or new user brings fresh wind to this world told me where to make those improvements.

Baraxlo ... you must leave your phone number, because if one day you do not go here with complaint ..... I worry about if something bad happened to you (just kidding friend)

PD Frangomel say..."We need more fresh for games"
hero member
Activity: 672
Merit: 500
I'm afraid I'm not understand how can you reach this conclusion.
hero member
Activity: 561
Merit: 500
kittehcoin.info
That what you are saying would be correct if we have fixed block reward, here with FRESH that is not the case. In short period of time you can't mine that much to make influence on anything. Value here will be increasing with other things not just by increasing difficulty like on some other coins.
hero member
Activity: 672
Merit: 500
What I wanted to say and we have lot of examples regarding other algos/coins is that I m all for the option someone builds new optimized kernels as long that person keeps that for himself, keep that private for personal benefit if there is any those days. Giving kernels to the public will do nothing, we will mine the same amounts because all of us will use that.
Then you are wrong. If everyone is guaranteed to have access to more or less the same power then anyone wanting to attack the network will have to go through quite some more effort. You get the same amount of coins, but they hold greater value as they have less risk.
legendary
Activity: 1022
Merit: 1000
FreshTheGame
@BaraxLo There is no need to write here the same things every and each day. You are making me tired just to read your posts and negative comments. People here are trying constantly to explain you how things works number of times and still that is not enough for you and you keep posting the same things over and over again. I don't understand where you get the strength to do it. Why don't blame someone why bitcoin price is down now, in fact why everything is too low now. I lose each day on every single coin where I invest I fail but I don't blame anyone because that was my decision where and how much to invest. No one forces me to do it. Just because I believe in something don't gives me right to blame someone when it fails. I have some decent buy orders regarding FRESH quantity on bter so I suggest to you to sell me your FRESH coins and move on to the next coin. In FRESH you see your huge profit but you are not prepared to wait. I have never seen that serious business has done in 6 months and you mention that as a huge period of time where nothing is done. Team is constantly here working. In fact those days in crypto I m happy when I see that dev of the some coin is there writing about his coin at lest once in ten days and not left the coin completely. That's how things are messed up.

you read my mind Smiley I wanted to write this also Smiley)))
hero member
Activity: 561
Merit: 500
kittehcoin.info
What I wanted to say and we have lot of examples regarding other algos/coins is that I m all for the option someone builds new optimized kernels as long that person keeps that for himself, keep that private for personal benefit if there is any those days. Giving kernels to the public will do nothing, we will mine the same amounts because all of us will use that. This is not the place to compare anything but when we look what happened with neoscript we will have the answers. Only benefit here is that FRESH is special regarding reward per block so I m not so afraid that multipools or some huge farm will made huge impact here no matter what optimization we/they have. There is a lot of things to discuss here but what mining teaches me is that power is not so important like being in right place on right time using low difficulty so it doesn't matter do I have 3,4 or 6 Mh/s per card.

@BaraxLo There is no need to write here the same things every and each day. You are making me tired just to read your posts and negative comments. People here are trying constantly to explain you how things works number of times and still that is not enough for you and you keep posting the same things over and over again. I don't understand where you get the strength to do it. Why don't blame someone why bitcoin price is down now, in fact why everything is too low now. I lose each day on every single coin where I invest I fail but I don't blame anyone because that was my decision where and how much to invest. No one forces me to do it. Just because I believe in something don't gives me right to blame someone when it fails. I have some decent buy orders regarding FRESH quantity on bter so I suggest to you to sell me your FRESH coins and move on to the next coin. In FRESH you see your huge profit but you are not prepared to wait. I have never seen that serious business has done in 6 months and you mention that as a huge period of time where nothing is done. Team is constantly here working. In fact those days in crypto I m happy when I see that dev of the some coin is there writing about his coin at lest once in ten days and not left the coin completely. That's how things are messed up.
sr. member
Activity: 339
Merit: 250
when everything is ready? Six months have passed since the founding of the coin, and zero Results only words, although some hint when you are ready to rostraivatsya not so, and that the money invested in the purchase of coins and six months they froze and the price fell heavily

Zero results? Please have a look at http://online.freshcoin.net/ and tell me how many other coins have platforms like that?
Out of the thousands maybe 30 can offer you that?
Maybe you should focus on other coins for a few months and then have another look at Fresh...
hero member
Activity: 672
Merit: 500
What is the point of performance increase can you give me just one good reason?
There are two good reasons.
  • they speculate higher performing kernels have value for elite miners wanting to hoard the coin. This is true in general but I hardly believe it's the case for FRESH. Main problem is elite kernels depreciate the coin in similar ways as ASICs, albeit not at that extreme scale;
  • the higher hashrate per-miner provides more protection against potential attacks by malicious entities running optimized miners as the difference is lower; this obviously holds true only when the higher perf version is largely available.
hero member
Activity: 910
Merit: 512
when everything is ready? Six months have passed since the founding of the coin, and zero Results only words, although some hint when you are ready to rostraivatsya not so, and that the money invested in the purchase of coins and six months they froze and the price fell heavily
hero member
Activity: 693
Merit: 500
What is the point of performance increase can you give me just one good reason?
Sorry, at this point I do not understand the question or the context
hero member
Activity: 561
Merit: 500
kittehcoin.info
What is the point of performance increase can you give me just one good reason?
hero member
Activity: 693
Merit: 500

You're dangerous when you get bored
I need four volunteers to increase their hashrate 40% for only 0.1btc


I could volunteer for increase but I am not good in programming Smiley
Wolf0 sell your freshmod.cl by 0.5btc. We are two  (Fragonmel and I)
I keep trying with the code, but I learn by trial and error and now I'm stuck(with big headache). I searched all codes of the different currencies x11 to see if anyone has bothered to correct or improve, but so far everything is the same, maybe someone has written something good in simd.c, but I do not know how to rewrite simd.cl and there are no programs that convert with a click (maybe one)
With the code Groelst music sounded, although the score was from another .... This is me being very difficult.
I'm not a programmer(I make electronic wizardry), I'm just with a curiosity and a desire to learn. Grin
legendary
Activity: 1022
Merit: 1000
FreshTheGame

You're dangerous when you get bored
I need four volunteers to increase their hashrate 40% for only 0.1btc


I could volunteer for increase but I am not good in programming Smiley
hero member
Activity: 693
Merit: 500
Not sure what base hashrate you're talking about but be advised 40% up kernels have been made available for free at least one month ago; I will port them to sgminer for only 0.1btc.

Some testers would be welcome however.
I'd try a lot.
But of course I do not mean 200-300khs increments, in my tests 800khs get out more with 7950hd stock (925-1325)
I can assure you that I have read all modifications and implementations with these algorithms
http://eprint.iacr.org/2009/510.pdf
http://www.cs.technion.ac.il/~orrd/SHAvite-3/
but my knowledge do not give more, perhaps compile with Cxl is not the direction to go (I'm now studying a little more SDK)

So far I've only seen Wolf0 results in your screenshots and me I think (though Wolf0 squeezes gpu 1200 and so).
200khs increments others are achieved by changing the code header for x11mod, for example

Here's my results - my FRESH kernel is kind of a quick and dirty hack, but meh (NSFW): https://ottrbutt.com/miner/freshcoinwolf-01072014.png

Card type and clocks are in the notepad.
Excellent, with very appropriate speeds-temp.
I do not get them to work the idle treath...
I think I'm stuck here and do not know how to make it work with shares

Altering these settings can get more hashrate and HW too fast jejejeje

Here, have a hint.

Code:
for (int i = 0; i < 256; i ++)
  {
  s32 tq;

  tq = q[i] + yoff_b_n[i];
  tq = REDS2(tq);
  tq = REDS1(tq);
  tq = REDS1(tq);
  q[i] = (tq <= 128 ? tq : tq - 257);
  }

If I remember correctly (and it has been a while), one of these reductions is not necessary.
I managed an increase 120khs...But very stable!!, not dance 100-200khs up down.
I guess so much better computing blocks Smiley

Most good optimizations provide SOME consistent increase, although there may also be some fluctuations, too.
bufff not get to make music....one hint more please Cheesy Grin
hero member
Activity: 693
Merit: 500
Not sure what base hashrate you're talking about but be advised 40% up kernels have been made available for free at least one month ago; I will port them to sgminer for only 0.1btc.

Some testers would be welcome however.
I'd try a lot.
But of course I do not mean 200-300khs increments, in my tests 800khs get out more with 7950hd stock (925-1325)
I can assure you that I have read all modifications and implementations with these algorithms
http://eprint.iacr.org/2009/510.pdf
http://www.cs.technion.ac.il/~orrd/SHAvite-3/
but my knowledge do not give more, perhaps compile with Cxl is not the direction to go (I'm now studying a little more SDK)

So far I've only seen Wolf0 results in your screenshots and me I think (though Wolf0 squeezes gpu 1200 and so).
200khs increments others are achieved by changing the code header for x11mod, for example

Here's my results - my FRESH kernel is kind of a quick and dirty hack, but meh (NSFW): https://ottrbutt.com/miner/freshcoinwolf-01072014.png

Card type and clocks are in the notepad.
Excellent, with very appropriate speeds-temp.
I do not get them to work the idle treath...
I think I'm stuck here and do not know how to make it work with shares

Altering these settings can get more hashrate and HW too fast jejejeje

Here, have a hint.

Code:
for (int i = 0; i < 256; i ++)
  {
  s32 tq;

  tq = q[i] + yoff_b_n[i];
  tq = REDS2(tq);
  tq = REDS1(tq);
  tq = REDS1(tq);
  q[i] = (tq <= 128 ? tq : tq - 257);
  }

If I remember correctly (and it has been a while), one of these reductions is not necessary.
I managed an increase 120khs...But very stable!!, not dance 100-200khs up down.
I guess so much better computing blocks Smiley
hero member
Activity: 693
Merit: 500
Not sure what base hashrate you're talking about but be advised 40% up kernels have been made available for free at least one month ago; I will port them to sgminer for only 0.1btc.

Some testers would be welcome however.
I'd try a lot.
But of course I do not mean 200-300khs increments, in my tests 800khs get out more with 7950hd stock (925-1325)
I can assure you that I have read all modifications and implementations with these algorithms
http://eprint.iacr.org/2009/510.pdf
http://www.cs.technion.ac.il/~orrd/SHAvite-3/
but my knowledge do not give more, perhaps compile with Cxl is not the direction to go (I'm now studying a little more SDK)

So far I've only seen Wolf0 results in your screenshots and me I think (though Wolf0 squeezes gpu 1200 and so).
200khs increments others are achieved by changing the code header for x11mod, for example

Here's my results - my FRESH kernel is kind of a quick and dirty hack, but meh (NSFW): https://ottrbutt.com/miner/freshcoinwolf-01072014.png

Card type and clocks are in the notepad.
Excellent, with very appropriate speeds-temp.
I do not get them to work the idle treath...
I think I'm stuck here and do not know how to make it work with shares

Altering these settings can get more hashrate and HW too fast jejejeje
hero member
Activity: 693
Merit: 500
Not sure what base hashrate you're talking about but be advised 40% up kernels have been made available for free at least one month ago; I will port them to sgminer for only 0.1btc.

Some testers would be welcome however.
I'd try a lot.
But of course I do not mean 200-300khs increments, in my tests 800khs get out more with 7950hd stock (925-1325)
I can assure you that I have read all modifications and implementations with these algorithms
http://eprint.iacr.org/2009/510.pdf
http://www.cs.technion.ac.il/~orrd/SHAvite-3/
but my knowledge do not give more, perhaps compile with Cxl is not the direction to go (I'm now studying a little more SDK)

So far I've only seen Wolf0 results in your screenshots and me I think (though Wolf0 squeezes gpu 1200 and so).
200khs increments others are achieved by changing the code header for x11mod, for example
hero member
Activity: 672
Merit: 500
Not sure what base hashrate you're talking about but be advised 40% up kernels have been made available for free at least one month ago; I will port them to sgminer for only 0.1btc.

Some testers would be welcome however.
hero member
Activity: 693
Merit: 500
My 280x are working on 4.45 mh/s undervolted, 7950 - 3.6 mh/s undervolted, temperatures are max 55!

7970.-1050gpu .-700memory=4,2mhs 55ºC
7950.-1050gpu .-600memory=3,99mhs 57ºC and two mounths before is a Kentucky Fried Chicken brick.Failure fans and sgminer not cut at 75ºC  Huh Undecided
I have another two 7950, and one of this get the same way.

I wouldn't downclock the memory if I were you...

280X doing 6.70MH/s at 1150/1600 - about 60C.

With the current kernel I have not noticed big changes ... playing with memory loss 60-70khs nothing else.
With the modified kernel that I have I can upload a 7950hd 925gpu 1350M to 4,5mhs but gives HW13 errors in 13 seconds lol ... does not work. I've tried everything to where I can go.
Let me try that you keep .... Roll Eyes I promise not to disseminate, I want to see where the modification is.


The modification is a rewritten everything, actually.
You're dangerous when you get bored
I need four volunteers to increase their hashrate 40% for only 0.1btc
hero member
Activity: 693
Merit: 500
My 280x are working on 4.45 mh/s undervolted, 7950 - 3.6 mh/s undervolted, temperatures are max 55!

7970.-1050gpu .-700memory=4,2mhs 55ºC
7950.-1050gpu .-600memory=3,99mhs 57ºC and two mounths before is a Kentucky Fried Chicken brick.Failure fans and sgminer not cut at 75ºC  Huh Undecided
I have another two 7950, and one of this get the same way.

I wouldn't downclock the memory if I were you...

280X doing 6.70MH/s at 1150/1600 - about 60C.

With the current kernel I have not noticed big changes ... playing with memory loss 60-70khs nothing else.
With the modified kernel that I have I can upload a 7950hd 925gpu 1350M to 4,5mhs but gives HW13 errors in 13 seconds lol ... does not work. I've tried everything to where I can go.
Let me try that you keep .... Roll Eyes I promise not to disseminate, I want to see where the modification is.
Pages:
Jump to: