I might be interested in an enclosure for 2 S1's and 2 S3's. I'm in UK. What's the price. If you post as a flat pack it would be easy to assemble.
Good Job!
Topic: FS: 4U Antminer S1 / S3 8 blades case - page 2. (Read 8045 times)
hero member
Activity: 532
Merit: 500
TaaS is a closed-end fund designated to blockchain
Good Job!
I might be interested in an enclosure for 2 S1's and 2 S3's. I'm in UK. What's the price. If you post as a flat pack it would be easy to assemble.
Would be keen. Can you give me a price?
Great little idea.
I had 10 antminers in my office at one point, was like spaghetti junction. This would of been brilliant.
Sadly, I've sold my ants since.
Wish you luck however.
I had 10 antminers in my office at one point, was like spaghetti junction. This would of been brilliant.
Sadly, I've sold my ants since.
Wish you luck however.
with S1 being the 20% of the network there is a lot of spaggetti out there...
please price
That is an amazingly well designed unit. I wish you'd have had those in January when I bought my first 10 S1's.
Great little idea.
I had 10 antminers in my office at one point, was like spaghetti junction. This would of been brilliant.
Sadly, I've sold my ants since.
Wish you luck however.
I had 10 antminers in my office at one point, was like spaghetti junction. This would of been brilliant.
Sadly, I've sold my ants since.
Wish you luck however.
Interesting. If the price is right, this could be a good packaging solution. Please post results of noise level and temperature readings.
Cheers
Cheers
W/gh?
$/gh?
Looks very power hungry
$/gh?
Looks very power hungry
He's selling the enclosure...not the miners. It looks to be a new way to setup you Antminer S1 blades.
Although a little late in the game this could prove useful for UNDERVOLTED/UNDERCLOCKED units as the difficulty increase has put MANY S1 miners offline due to kWh rates.
Correct!
Plus it cleans up mining setups and minimizes spaghetti effects
ah gotcha, sorry my head was overtaken by hayfever yesterday, perhaps I didn't read properly.
looks like a very nice solution, be good to see similar for newer rigging; i'm sure you will get plenty of business for this. best luck
That is pretty awesome, good work!
W/gh?
$/gh?
Looks very power hungry
$/gh?
Looks very power hungry
He's selling the enclosure...not the miners. It looks to be a new way to setup you Antminer S1 blades.
Although a little late in the game this could prove useful for UNDERVOLTED/UNDERCLOCKED units as the difficulty increase has put MANY S1 miners offline due to kWh rates.
Undervolt is the only solution for now if there is a Bitmain kit for later on we discuss again
W/gh?
$/gh?
Looks very power hungry
$/gh?
Looks very power hungry
He's selling the enclosure...not the miners. It looks to be a new way to setup you Antminer S1 blades.
Although a little late in the game this could prove useful for UNDERVOLTED/UNDERCLOCKED units as the difficulty increase has put MANY S1 miners offline due to kWh rates.
Correct!
Plus it cleans up mining setups and minimizes spaghetti effects
W/gh?
$/gh?
Looks very power hungry
$/gh?
Looks very power hungry
He's selling the enclosure...not the miners. It looks to be a new way to setup you Antminer S1 blades.
Although a little late in the game this could prove useful for UNDERVOLTED/UNDERCLOCKED units as the difficulty increase has put MANY S1 miners offline due to kWh rates.
W/gh?
$/gh?
Looks very power hungry
$/gh?
Looks very power hungry
This pics below are of a prototype, it is made with thinner material, lacking some holes, and is put together with various fasteners to minimize cost of fabrication.
Final product will look similar, pending the number of units that will be produced.
Once I have at least 10 paid orders I will put this into production.
I will post the price shortly, working on few quotes.
Fabrication time approximately 10-14 days.
Please reply here, PM or email me with any questions. {alexdotshchipkovatgmaildotcom}
I can design and fabricate whatever configuration that's desired, non rack mount, 120 fans in back, 80 fans all over, 140 fans in front, box for blades only with no PSU, more than 8 blades etc. etc.
Minimum order for custom designs is 15 units.
It is possible to get 10 blades in 4U case but that will require modifying the heatsinks, which might be great for underclocked units.
18 blades in 7U case is possible without heatsink mod.
Here are some pics:
(if pics don't show properly they are here:)
http://e30.us/4sale/4u8s1
Having blades in this case dropped temps by 10 degrees C on overclocked S1s.
http://e30.us/4sale/4u8s1/IMG_3879.JPG
http://e30.us/4sale/4u8s1/IMG_3866.JPG
http://e30.us/4sale/4u8s1/IMG_3867.JPG
http://e30.us/4sale/4u8s1/IMG_3868.JPG
http://e30.us/4sale/4u8s1/IMG_3869.JPG
http://e30.us/4sale/4u8s1/IMG_3870.JPG
http://e30.us/4sale/4u8s1/IMG_3871.JPG
http://e30.us/4sale/4u8s1/IMG_3872.JPG
http://e30.us/4sale/4u8s1/IMG_3873.JPG
http://e30.us/4sale/4u8s1/IMG_3874.JPG
http://e30.us/4sale/4u8s1/IMG_3875.JPG
http://e30.us/4sale/4u8s1/IMG_3876.JPG
http://e30.us/4sale/4u8s1/IMG_3877.JPG
http://e30.us/4sale/4u8s1/IMG_3878.JPG
Final product will look similar, pending the number of units that will be produced.
Once I have at least 10 paid orders I will put this into production.
I will post the price shortly, working on few quotes.
Fabrication time approximately 10-14 days.
Please reply here, PM or email me with any questions. {alexdotshchipkovatgmaildotcom}
I can design and fabricate whatever configuration that's desired, non rack mount, 120 fans in back, 80 fans all over, 140 fans in front, box for blades only with no PSU, more than 8 blades etc. etc.
Minimum order for custom designs is 15 units.
It is possible to get 10 blades in 4U case but that will require modifying the heatsinks, which might be great for underclocked units.
18 blades in 7U case is possible without heatsink mod.
Here are some pics:
(if pics don't show properly they are here:)
http://e30.us/4sale/4u8s1
Having blades in this case dropped temps by 10 degrees C on overclocked S1s.
http://e30.us/4sale/4u8s1/IMG_3879.JPG
http://e30.us/4sale/4u8s1/IMG_3866.JPG
http://e30.us/4sale/4u8s1/IMG_3867.JPG
http://e30.us/4sale/4u8s1/IMG_3868.JPG
http://e30.us/4sale/4u8s1/IMG_3869.JPG
http://e30.us/4sale/4u8s1/IMG_3870.JPG
http://e30.us/4sale/4u8s1/IMG_3871.JPG
http://e30.us/4sale/4u8s1/IMG_3872.JPG
http://e30.us/4sale/4u8s1/IMG_3873.JPG
http://e30.us/4sale/4u8s1/IMG_3874.JPG
http://e30.us/4sale/4u8s1/IMG_3875.JPG
http://e30.us/4sale/4u8s1/IMG_3876.JPG
http://e30.us/4sale/4u8s1/IMG_3877.JPG
http://e30.us/4sale/4u8s1/IMG_3878.JPG
Jump to: