Topic: Gauging interest for a modular 3U server case for BitFury miners (Read 4725 times)
First pics.
September 18, 2013, 11:42:30 PM
September 18, 2013, 09:55:31 PM
$250 for the open-air triple i.e. no sheeting. This version is just wide enough to where it could sit on a shelf in a rack. 120mm fans could be mounted in front of each rig and a couple of PSUs along the back.
And stackable, of course.
And stackable, of course.
That looks good. How tall is it, 5U?
September 18, 2013, 04:49:22 PM
Any update on availability price for the dual/triple rig setups? Your stuff looks pretty amazing and I'm looking for something for my october kits.
$250 for the open-air triple i.e. no sheeting. This version is just wide enough to where it could sit on a shelf in a rack. 120mm fans could be mounted in front of each rig and a couple of PSUs along the back.
And stackable, of course.
September 18, 2013, 11:44:51 AM
Any update on availability price for the dual/triple rig setups? Your stuff looks pretty amazing and I'm looking for something for my october kits.
September 06, 2013, 10:29:14 PM
This is great. I've been thinking about something similar the last few days.
What if there was a back plane PCB engineered that had mounting holes? Could
you stand the miner up and fit three of them together without fans in between? At least
that is what I was envisioning.
thanks.
What if there was a back plane PCB engineered that had mounting holes? Could
you stand the miner up and fit three of them together without fans in between? At least
that is what I was envisioning.
thanks.
Sorry, but I don't understand. Please post a sketch.Just goggled 3u Server case and realized that you would probably not be able to stand it up.
Laying the miner sideways doesn't seem to provide good airflow.
I am interested in a case where you can fit 3 Bitfurry Miners though. 3u server chases wouldn't be suitable.
I'm also working on an open-air tray with a width to fit a 19-inch rack and a depth to hold 3 rigs (and a PSU).
Awesome! Can't wait.
September 06, 2013, 09:55:18 PM
This is what I want. Take my money! Seriously, count me in for a single unit.
September 06, 2013, 06:39:18 PM
This is great. I've been thinking about something similar the last few days.
What if there was a back plane PCB engineered that had mounting holes? Could
you stand the miner up and fit three of them together without fans in between? At least
that is what I was envisioning.
thanks.
What if there was a back plane PCB engineered that had mounting holes? Could
you stand the miner up and fit three of them together without fans in between? At least
that is what I was envisioning.
thanks.
Sorry, but I don't understand. Please post a sketch.Just goggled 3u Server case and realized that you would probably not be able to stand it up.
Laying the miner sideways doesn't seem to provide good airflow.
I am interested in a case where you can fit 3 Bitfurry Miners though. 3u server chases wouldn't be suitable.
I'm also working on an open-air tray with a width to fit a 19-inch rack and a depth to hold 3 rigs (and a PSU).
September 06, 2013, 06:35:01 PM
This is great. I've been thinking about something similar the last few days.
What if there was a back plane PCB engineered that had mounting holes? Could
you stand the miner up and fit three of them together without fans in between? At least
that is what I was envisioning.
thanks.
What if there was a back plane PCB engineered that had mounting holes? Could
you stand the miner up and fit three of them together without fans in between? At least
that is what I was envisioning.
thanks.
Sorry, but I don't understand. Please post a sketch.Just goggled 3u Server case and realized that you would probably not be able to stand it up.
Laying the miner sideways doesn't seem to provide good airflow.
I am interested in a case where you can fit 3 Bitfurry Miners though. 3u server chases wouldn't be suitable.
September 06, 2013, 04:52:50 PM
This is great. I've been thinking about something similar the last few days.
What if there was a back plane PCB engineered that had mounting holes? Could
you stand the miner up and fit three of them together without fans in between? At least
that is what I was envisioning.
thanks.
What if there was a back plane PCB engineered that had mounting holes? Could
you stand the miner up and fit three of them together without fans in between? At least
that is what I was envisioning.
thanks.
Sorry, but I don't understand. Please post a sketch. September 06, 2013, 03:26:13 PM
This is great. I've been thinking about something similar the last few days.
What if there was a back plane PCB engineered that had mounting holes? Could
you stand the miner up and fit three of them together without fans in between? At least
that is what I was envisioning.
thanks.
What if there was a back plane PCB engineered that had mounting holes? Could
you stand the miner up and fit three of them together without fans in between? At least
that is what I was envisioning.
thanks.
September 06, 2013, 03:12:44 PM
I'd be interested pending price. Do you have any idea on what the dual rig will run?
September 03, 2013, 06:19:54 PM
Dual rig version:
September 02, 2013, 09:47:55 AM
Here's the current state of the rack mountable case for (one) BitFury rig:
- It seems that the BF's aren't generating a lot of heat, so I went back to a standard PSU and front-only fans (92mm).
- The front and back sheeting will be perforated aluminum.
- On the back, there will be a bulkhead fitting for an RJ45 connector.
- A rPi connector cable will be required in order to connect to the m-board.
August 08, 2013, 05:08:15 PM
With the M board in that orientation, isn't that blocking the air flow? Guess it doesn't matter if its open case, just not the best i guess,
This case will be fully enclosed. The new m-board is smaller, so there would be 38mm of open space above and blow it for air circulation.
Otherwise, I could make this 4U.
Agreed. Even the old M-board was not wide enough to restrict air-pressure in an enclosed case. Especially with a push-pull fan design like what you have laid out. This will be a wind tunnel.
August 08, 2013, 04:42:30 PM
With the M board in that orientation, isn't that blocking the air flow? Guess it doesn't matter if its open case, just not the best i guess,
This case will be fully enclosed. The new m-board is smaller, so there would be 38mm of open space above and blow it for air circulation.
Otherwise, I could make this 4U.
August 08, 2013, 04:24:11 PM
With the M board in that orientation, isn't that blocking the air flow? Guess it doesn't matter if its open case, just not the best i guess,
August 08, 2013, 03:50:17 PM
Nice design. I Am interested in one if the $$ is right. ( below $200)
August 08, 2013, 03:45:06 PM
Looks great! I will be down for one that holds 2 kits (left side on your image).
3U height, and 2 full hash kits makes the downside of a 1U PSU a nice trade off.
3U height, and 2 full hash kits makes the downside of a 1U PSU a nice trade off.
August 08, 2013, 01:53:33 PM
I'm interested. For October as well.
Jump to: