Topic: GekkoScience is now dabbling with 16nm ASICs for new designs - page 19. (Read 77011 times)
December 16, 2016, 08:31:31 PM
the r1 runs openwrt you could change the mac as instructed for a miner...you could run s7-ln's or something with silentish fans
December 16, 2016, 08:28:04 PM
Problem I have with them, is they block MAC addresses on their network, unless it's been authorized.
So unless I can somehow trick the system into thinking my miner is a laptop, no joy
But using a USB setup through my already approved laptop. All good
If you're too lazy to ssh into openwrt...Just use an r1 to bridge to lan, use your laptop for logging into the network (if they have one of those wifi portals) hook up a switch and your golden.
And if you're using an r1 you might as well use crazyguy's r1 patch so that you can mine altcoins or solo ck...
either way their to loud for the room
so these usb ones are for me
December 16, 2016, 07:30:30 PM
Problem I have with them, is they block MAC addresses on their network, unless it's been authorized.
So unless I can somehow trick the system into thinking my miner is a laptop, no joy
But using a USB setup through my already approved laptop. All good
If you're too lazy to ssh into openwrt...Just use an r1 to bridge to lan, use your laptop for logging into the network (if they have one of those wifi portals) hook up a switch and your golden.
And if you're using an r1 you might as well use crazyguy's r1 patch so that you can mine altcoins or solo ck...
December 16, 2016, 06:40:31 PM
Sidehack, could you just clarify something for me?
I've just read in the 2pac sales thread that Philip asked if the older version of cgminer gekko would work with the new 2pac stick. You said it would show a lot of HW errors. Now the code that vh is doing, is that for the chip so it talks to cgminer correctly or will there be an update for cgminer to be able to run the new hardware you're producing?
I've just read in the 2pac sales thread that Philip asked if the older version of cgminer gekko would work with the new 2pac stick. You said it would show a lot of HW errors. Now the code that vh is doing, is that for the chip so it talks to cgminer correctly or will there be an update for cgminer to be able to run the new hardware you're producing?
December 16, 2016, 06:30:28 PM
I soon have access to Free power, so I'm REALLY waiting on those pods to pop up
Small room so can't use anything noisy, If I could get an R4 I would of done so lol
will pod become a scourge of school closets
?Hotel room actually
I have 20TH running already at home
But work is sticking me in a hotel for 5 months in southern ontario SO I may as well milk it for what I can while I'm stuck there
Problem I have with them, is they block MAC addresses on their network, unless it's been authorized.
So unless I can somehow trick the system into thinking my miner is a laptop, no joy
But using a USB setup through my already approved laptop. All good
shh...
openwrt is very easy to change mac.. just put it in the network.conf and it can be anything you want.
December 16, 2016, 06:10:51 PM
I soon have access to Free power, so I'm REALLY waiting on those pods to pop up
Small room so can't use anything noisy, If I could get an R4 I would of done so lol
will pod become a scourge of school closets
?Hotel room actually
I have 20TH running already at home
But work is sticking me in a hotel for 5 months in southern ontario SO I may as well milk it for what I can while I'm stuck there
Problem I have with them, is they block MAC addresses on their network, unless it's been authorized.
So unless I can somehow trick the system into thinking my miner is a laptop, no joy
But using a USB setup through my already approved laptop. All good
shh...
December 16, 2016, 06:09:03 PM
I soon have access to Free power, so I'm REALLY waiting on those pods to pop up
Small room so can't use anything noisy, If I could get an R4 I would of done so lol
will pod become a scourge of school closets
? December 16, 2016, 06:05:37 PM
I soon have access to Free power, so I'm REALLY waiting on those pods to pop up
Small room so can't use anything noisy, If I could get an R4 I would of done so lol
December 16, 2016, 04:02:01 PM
December 15, 2016, 11:32:39 PM
I'll make sure it's compatible with S3 housings too. The thing will be USB-connected, so it might take a header adapter or something to still plug into the boards inside the case but I'll make sure it's possible. S1 and S5, being fairly open, should have no trouble.
S3 to S5 is the same other than the location of the pcie plugs. On the s5 boards the pcie plugs are slightly further apart and a bit lower.
It would be nice to use a s3 cover without any mods but Im sure most would be fine without the cover. Honestly one could just run the plugs in there before they close it up or a jumper cable mounted to the cover. Not a big deal IMO.
December 15, 2016, 10:21:49 PM
Yes, that's the idea. The final goal for BF16 design is a 33-chip board designed specifically to mount on S1/3/5 chassis. I'll make sure it's compatible with S3 housings too. The thing will be USB-connected, so it might take a header adapter or something to still plug into the boards inside the case but I'll make sure it's possible. S1 and S5, being fairly open, should have no trouble.
I'll probably do something like a 2Pac for every S5 board sent in, or a pod for every 2 or 4 boards. Once I settle on something I'll make sure it's in the Group Buy thread details.
I'll probably do something like a 2Pac for every S5 board sent in, or a pod for every 2 or 4 boards. Once I settle on something I'll make sure it's in the Group Buy thread details.
December 15, 2016, 10:03:49 PM
I will probably be doing an S5 board exchange thing where folks can cash in those PCBs for sticks or pods. Be a good way to make sure I stay in chips. The 2Pac run will probably be limited, but if sales of the pod are good I'll probably kepe making those. The 2Pac will be superseded by the BF16 stick anyway, but the old-chip pod will be a nice "bargain" pod versus the higher entry cost (and accordingly better specs) of the BF16 pod.
Maybe I am getting ahead of the storyline, but once chips are stripped from the S5 boards, could remaining S5 "carcasses" be used to mount BF chip based presumable boards later, or likely not? Thanks.
December 15, 2016, 09:38:01 PM
Yeah, there's details in a post about two pages back. I haven't gotten around to setting up an official Group Buy thread but I'll try and do that tomorrow. Fridays are good days for odds-and-ends work.
December 15, 2016, 09:29:02 PM
Do you have a running list for the 2pacs yet? I want to order a few while I have the cash in hand and will get the BF stuff once taxes come in. I want at least 2 minimum so I can run one modded/oc'd against the modded OG stick and one to leave untouched.
December 15, 2016, 09:05:29 PM
I will probably be doing an S5 board exchange thing where folks can cash in those PCBs for sticks or pods. Be a good way to make sure I stay in chips. The 2Pac run will probably be limited, but if sales of the pod are good I'll probably kepe making those. The 2Pac will be superseded by the BF16 stick anyway, but the old-chip pod will be a nice "bargain" pod versus the higher entry cost (and accordingly better specs) of the BF16 pod.
Nice ! I have two boards laying around here ;-)
Keep us posted (as usual)
December 15, 2016, 08:43:36 PM
I will probably be doing an S5 board exchange thing where folks can cash in those PCBs for sticks or pods. Be a good way to make sure I stay in chips. The 2Pac run will probably be limited, but if sales of the pod are good I'll probably kepe making those. The 2Pac will be superseded by the BF16 stick anyway, but the old-chip pod will be a nice "bargain" pod versus the higher entry cost (and accordingly better specs) of the BF16 pod.
December 15, 2016, 08:28:11 PM
Sounds like everything's going as planned and production of the sticks will begin in a few weeks Hopefully everything else will as well, never been more happy in my life for a miner. I'm ready to pull out S5s for these new miners!
Hopefully everything else will as well, never been more happy in my life for a miner. I'm ready to pull out S5s for these new miners! 
December 15, 2016, 07:15:32 PM
Phew.. took some time to read this thread through Haven't had much time to visit forums lately as things are moving at pretty crazy speeds here at Bitfury, but rest assured I'll do all I can to support community miners such as the pod and the compac also in the future.
P.S. Sidehack show photos of the boards already!!
P.P.S. Chips are going to get shipped tomorrow
Haven't had much time to visit forums lately as things are moving at pretty crazy speeds here at Bitfury, but rest assured I'll do all I can to support community miners such as the pod and the compac also in the future.P.S. Sidehack show photos of the boards already!!
P.P.S. Chips are going to get shipped tomorrow
Happy Happy, Joy Joy!! Thank you very much!
December 15, 2016, 04:20:02 PM
Nice, this is like a major gear shift now and the project is running full speed
Thanks for the efforts for the home mining Sidehack and Punin!
Thanks for the efforts for the home mining Sidehack and Punin!
December 15, 2016, 04:17:27 PM
Awesome news. It is great to hear that the chips are (almost) on their way to sidehack.
Hopefully, they will be easy for vh to communicate with and get everything working nicely.
Hopefully, they will be easy for vh to communicate with and get everything working nicely.
Jump to: