these numbers are rough, not accurate, but close.
The 8A 12V power supply is enough to run multiple units, 8A 12V offers a power output of around 96 Watts. When converted to 5V at the USB ports, that offers around 19 amps of power at the USB ports. If you remove 10% for loss (and thats ALOT more than real numbers) you still have 17.28 Amps of power.
At the default frequency of 100MHz, the NewPac runs at 22.8 GH pulling 3.5Watts or 0.7Amps, less if you add cooling. long story short, at default frequencies, you can run a full gekkoscience hub (6 units) without a problem.
When properly cooled, the power draw is actually less. when cooled to the point you can actually hold onto the unit, at 200Mhz, it pulls somewhere around 1 amp per unit. again, more than enough for 6 units.
just remember the Units should be in 2 -7. use ports 1 and D for accessories (fans).
Topic: GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread - page 36. (Read 62052 times)
May 20, 2020, 10:34:00 AM
May 20, 2020, 10:20:40 AM
Are you actively cooling the sticks?
I am, and it so happens its a USB Arctic Fan. So its another amp draw on power source. I remote into miner, so I can still see the 1 stick is still running. I’m guessing 8amp brick power supply was never intended to power this many stick miners. So solution maybe to connect using alternative PC powersupply 8 pin connection. Will report back in a few hours as to 1 stick status.
May 20, 2020, 08:39:21 AM
Hello All, I am new to using Newpac. I am running 5 total using gekkoScience hub and power brick 8Amp. I find when mining whether it is at 100,200 or 300 it always Zombies. It tries to recover and does a few times but when I come home cmd script is closed and no longer running. Can it be that they are not getting enough power? And if I were to tweak voltage pot is there a way to read what the voltage change is anywhere?
Are you actively cooling the sticks?
May 20, 2020, 08:32:49 AM
I assume you mean running 1 stick while inserted in hub?
Yes, that is what I meant. The announcement post states that these consume less than
It's a good starting point to check.
May 20, 2020, 08:23:37 AM
I assume you mean running 1 stick while inserted in hub? I can try that today and allow to run at same 200mhz as a control experiment. I will report later when I get back from work.
The Zombie doesn't occur right away. I varies, It runs normal for a few hours sometimes other times it seems to happen within minutes, totally random. I check temp from time to time (37c-39c). So Thermal runaway may not be an issue.
The Zombie doesn't occur right away. I varies, It runs normal for a few hours sometimes other times it seems to happen within minutes, totally random. I check temp from time to time (37c-39c). So Thermal runaway may not be an issue.
May 20, 2020, 07:47:16 AM
Hello All, I am new to using Newpac. I am running 5 total using gekkoScience hub and power brick 8Amp. I find when mining whether it is at 100,200 or 300 it always Zombies. It tries to recover and does a few times but when I come home cmd script is closed and no longer running. Can it be that they are not getting enough power? And if I were to tweak voltage pot is there a way to read what the voltage change is anywhere?
Does one stick work?
May 20, 2020, 07:33:16 AM
I'm Running Windows 10.
May 20, 2020, 02:03:25 AM
Hello All, I am new to using Newpac. I am running 5 total using gekkoScience hub and power brick 8Amp. I find when mining whether it is at 100,200 or 300 it always Zombies. It tries to recover and does a few times but when I come home cmd script is closed and no longer running. Can it be that they are not getting enough power? And if I were to tweak voltage pot is there a way to read what the voltage change is anywhere?
You dont need to touch the voltage pot really. What OS are you using?
May 19, 2020, 07:40:34 PM
Hello All, I am new to using Newpac. I am running 5 total using gekkoScience hub and power brick 8Amp. I find when mining whether it is at 100,200 or 300 it always Zombies. It tries to recover and does a few times but when I come home cmd script is closed and no longer running. Can it be that they are not getting enough power? And if I were to tweak voltage pot is there a way to read what the voltage change is anywhere?
May 19, 2020, 06:42:50 AM
The latest build does (as far as i know) not work with serials anymore. This is due the fact the latest build does use autotune and does optmize everything for each miner individual. So the need of serials is not there anymore.
See also page 21 for autotune exlanation: https://bitcointalk.org/index.php?topic=5053833.400.
See also page 21 for autotune exlanation: https://bitcointalk.org/index.php?topic=5053833.400.
May 18, 2020, 09:17:47 PM
Hey VH or Sidehack,
tried to use: May 26 @ 9e51f0b- cgminer-4.11.1-windows-gekko-9e51f0b.7z
but unable to initialize USB. verified zadig. older Dec2018 build works great.
my issue is that i have my stick set up as individual workers. I have 3 of them. and i've used my sticks serial numbers to get cgminer to run 3 instances, each with a different worker setup.
I'd love to use the freq range additions, but for some reason the newer may 26th ver does not work this way by adding this to run:
does the newer build not recognize serial's?
maybe there is a better way to run 3 sticks, but i can get them all to hit around 300ghz combined on my pool this way. but i feel like they can go faster.
tried to use: May 26 @ 9e51f0b- cgminer-4.11.1-windows-gekko-9e51f0b.7z
but unable to initialize USB. verified zadig. older Dec2018 build works great.
my issue is that i have my stick set up as individual workers. I have 3 of them. and i've used my sticks serial numbers to get cgminer to run 3 instances, each with a different worker setup.
I'd love to use the freq range additions, but for some reason the newer may 26th ver does not work this way by adding this to run:
Code:
cgminer.exe -o stratum+tcp://us-east.stratum.slushpool.com:3333 -u xxxxxx.worker1 -p x --gekko-serial "GS-10031593" --gekko-newpac-freq 515
does the newer build not recognize serial's?
maybe there is a better way to run 3 sticks, but i can get them all to hit around 300ghz combined on my pool this way. but i feel like they can go faster.
May 16, 2020, 10:14:40 PM
Unless it's a seriously badass cable, it's probably got severe voltage drop drawing that kind of power and it's choking. 650MHz could be asking for 3A so you want as low-loss power delivery as possible.
Also, since this is chipside cooling, you want a non-conductive thermal paste just in case.
Also, since this is chipside cooling, you want a non-conductive thermal paste just in case.
May 16, 2020, 01:05:36 PM
I tried a RPi2 and it ran okay for one R606 but as soon as I added another it had problems. A lot of errors and it eventually crashed. I think the problem is the USB - it is just not great the the RPi1 and 2.
I switched to a RPi-Z (got it for $5 from Micro Center) and it has been running well for over a year with five R606's.
It does occasionally go belly up for some reason but a simple reboot gets it going again.
I switched to a RPi-Z (got it for $5 from Micro Center) and it has been running well for over a year with five R606's.
It does occasionally go belly up for some reason but a simple reboot gets it going again.
May 15, 2020, 06:17:21 PM
Is anyone running CGminer on an RPi2.
I have spare Raspeberry PI 2B that I'd like to re-commission for an instance of CGminer with an R606.
Does anyone have insight into performance issues or latency with a Pi2 in this config?
Thanks
I have spare Raspeberry PI 2B that I'd like to re-commission for an instance of CGminer with an R606.
Does anyone have insight into performance issues or latency with a Pi2 in this config?
Thanks
May 15, 2020, 04:54:05 PM
If he's using a GS hub, I honestly don't know what the problem is because each port pair is supplied by a 6A-rated regulator with extra bulk capacitors for each port.
Regarding paste - I get Arctic Silver ceramic, and put a drop on each chip. I would assume HP server paste should be more than sufficient. Only thing I can say about adding a heatsink is don't overtorque. The board might flex a bit but try and keep it flat, otherwise the flexion might damage internal traces or topside components.
Regarding paste - I get Arctic Silver ceramic, and put a drop on each chip. I would assume HP server paste should be more than sufficient. Only thing I can say about adding a heatsink is don't overtorque. The board might flex a bit but try and keep it flat, otherwise the flexion might damage internal traces or topside components.
May 15, 2020, 10:18:07 AM
Hi I tried to increase cooling and increase current 1600w with pci-e output but nothing changes the Newpac2 and also the 2Pac do not reach 200mhz what can I do ...? I put everything right in setting and various calibrations but the 2pacs are fine even at 200Mhz the newpac2 zero nothing to do not pass the 100/150 with calibrations ranging from 100 to 300 ... Heeelllllpppp
May 15, 2020, 10:02:33 AM
In short, yes. In long there is no way to say no 100%, 99.9% of all motherboards and USB switches have "limiters" (point-of-load switches with over-current detection) built in to prevent that. 10Watts is only 2 Amps though, and most modern USB ports can handle 2 amps.
May 15, 2020, 09:20:14 AM
Am I correct in assuming a NewPac running at 400Mhz pulls around 10 watts? Any chance that will burn up a USB3 port on my PC? Thanks...
May 14, 2020, 01:13:08 PM
Tried compiling the r606 branch today.
PiMP OS (Ubuntu 18.04)
All compile instructions copy-pasted from this thread page 1. When that initially failed, I turned to the README.md at the github repo and added -Wall to CFLAGS.
make is failing with openssl (libcurl) errors.
config.log exceeds maximum post length of 64,000 characters.
make command output:
Thoughts? Suggestions?
Curious. Branch r606 compiled just fine on the rig which has been faithfully running my compac and 2pacs. The old HP Mini is running 32-bit Bodhi Linux (Ubuntu 16.04.) It will take me some time to sort out why the PiMP (Ubuntu 18.04) rig is throwing libcurl-openssl errors at compile time. The libcurl4-openssl-dev package appears properly installed; at least, that's what apt tell me.
In the mean-time, I switched the USB cable over to the Mini and ... pow! Everything seems to work. Almost.
On a machine where User had already been granted USB driver access privileges, branch r606 refuses to look for devices unless cgminer is run as root.
Some observations when mixing BM1384 and BM1387 sticks in the same running instance of cgminer:
Note: all setting are made in cgminer.conf
In a GS hub, you cannot, apparently, pair 2pacs on the same power controller above 200MHz. One of them will drop out with a Found 0 chips error. They pair just fine with a newpac, though. This is the case on both master and r606 branch.
PiMP OS (Ubuntu 18.04)
All compile instructions copy-pasted from this thread page 1. When that initially failed, I turned to the README.md at the github repo and added -Wall to CFLAGS.
make is failing with openssl (libcurl) errors.
config.log exceeds maximum post length of 64,000 characters.
make command output:
Code:
# make -j 2
/usr/local/lib/libcurl.a(libcurl_la-url.o): In function `idnconvert_hostname.isra.8':
url.c:(.text+0x508): undefined reference to `idn2_check_version'
url.c:(.text+0x525): undefined reference to `idn2_lookup_ul'
url.c:(.text+0x55e): undefined reference to `idn2_strerror'
/usr/local/lib/libcurl.a(libcurl_la-url.o): In function `Curl_disconnect':
url.c:(.text+0xf56): undefined reference to `idn2_free'
url.c:(.text+0xf72): undefined reference to `idn2_free'
url.c:(.text+0xf8e): undefined reference to `idn2_free'
url.c:(.text+0xfaa): undefined reference to `idn2_free'
/usr/local/lib/libcurl.a(libcurl_la-url.o): In function `Curl_connect':
url.c:(.text+0x32f9): undefined reference to `idn2_free'
/usr/local/lib/libcurl.a(libcurl_la-url.o):url.c:(.text+0x3315): more undefined references to `idn2_free' follow
/usr/local/lib/libcurl.a(libcurl_la-version.o): In function `curl_version.part.0':
version.c:(.text+0x80): undefined reference to `idn2_check_version'
version.c:(.text+0x8c): undefined reference to `idn2_check_version'
/usr/local/lib/libcurl.a(libcurl_la-version.o): In function `curl_version_info.part.1':
version.c:(.text+0x111): undefined reference to `idn2_check_version'
/usr/local/lib/libcurl.a(libcurl_la-md5.o): In function `Curl_md5it':
md5.c:(.text+0x25): undefined reference to `MD5_Init'
md5.c:(.text+0x42): undefined reference to `MD5_Update'
md5.c:(.text+0x4d): undefined reference to `MD5_Final'
/usr/local/lib/libcurl.a(libcurl_la-md5.o):(.data.rel.ro+0x0): undefined reference to `MD5_Init'
/usr/local/lib/libcurl.a(libcurl_la-md5.o):(.data.rel.ro+0x8): undefined reference to `MD5_Update'
/usr/local/lib/libcurl.a(libcurl_la-md5.o):(.data.rel.ro+0x10): undefined reference to `MD5_Final'
/usr/local/lib/libcurl.a(libcurl_la-md5.o):(.data.rel.ro+0x20): undefined reference to `MD5_Init'
/usr/local/lib/libcurl.a(libcurl_la-md5.o):(.data.rel.ro+0x28): undefined reference to `MD5_Update'
/usr/local/lib/libcurl.a(libcurl_la-md5.o):(.data.rel.ro+0x30): undefined reference to `MD5_Final'
/usr/local/lib/libcurl.a(libcurl_la-sha256.o): In function `Curl_sha256it':
sha256.c:(.text+0x25): undefined reference to `SHA256_Init'
sha256.c:(.text+0x42): undefined reference to `SHA256_Update'
sha256.c:(.text+0x4d): undefined reference to `SHA256_Final'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `Curl_ossl_sha256sum':
openssl.c:(.text+0x13c): undefined reference to `EVP_MD_CTX_new'
openssl.c:(.text+0x144): undefined reference to `EVP_sha256'
openssl.c:(.text+0x151): undefined reference to `EVP_DigestInit_ex'
openssl.c:(.text+0x15f): undefined reference to `EVP_DigestUpdate'
openssl.c:(.text+0x16f): undefined reference to `EVP_DigestFinal_ex'
openssl.c:(.text+0x177): undefined reference to `EVP_MD_CTX_free'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `Curl_ossl_md5sum':
openssl.c:(.text+0x1cc): undefined reference to `EVP_MD_CTX_new'
openssl.c:(.text+0x1d4): undefined reference to `EVP_md5'
openssl.c:(.text+0x1e1): undefined reference to `EVP_DigestInit_ex'
openssl.c:(.text+0x1ef): undefined reference to `EVP_DigestUpdate'
openssl.c:(.text+0x1ff): undefined reference to `EVP_DigestFinal_ex'
openssl.c:(.text+0x207): undefined reference to `EVP_MD_CTX_free'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `Curl_ossl_engines_list':
openssl.c:(.text+0x235): undefined reference to `ENGINE_get_first'
openssl.c:(.text+0x257): undefined reference to `ENGINE_get_next'
openssl.c:(.text+0x267): undefined reference to `ENGINE_get_id'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `Curl_ossl_close_all':
openssl.c:(.text+0x2b4): undefined reference to `ENGINE_finish'
openssl.c:(.text+0x2c0): undefined reference to `ENGINE_free'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `Curl_ossl_set_engine':
openssl.c:(.text+0x308): undefined reference to `ENGINE_by_id'
openssl.c:(.text+0x325): undefined reference to `ENGINE_finish'
openssl.c:(.text+0x331): undefined reference to `ENGINE_free'
openssl.c:(.text+0x344): undefined reference to `ENGINE_init'
openssl.c:(.text+0x37f): undefined reference to `ENGINE_free'
openssl.c:(.text+0x384): undefined reference to `ERR_get_error'
openssl.c:(.text+0x394): undefined reference to `ERR_error_string_n'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `ossl_recv':
openssl.c:(.text+0x433): undefined reference to `ERR_clear_error'
openssl.c:(.text+0x461): undefined reference to `SSL_read'
openssl.c:(.text+0x4ae): undefined reference to `SSL_get_error'
openssl.c:(.text+0x4c3): undefined reference to `ERR_get_error'
openssl.c:(.text+0x553): undefined reference to `ERR_error_string_n'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `ssl_tls_trace':
openssl.c:(.text+0x6c4): undefined reference to `SSL_alert_desc_string_long'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `ssl_ui_writer':
openssl.c:(.text+0x920): undefined reference to `UI_get_string_type'
openssl.c:(.text+0x930): undefined reference to `UI_get0_user_data'
openssl.c:(.text+0x93d): undefined reference to `UI_get_input_flags'
openssl.c:(.text+0x946): undefined reference to `UI_OpenSSL'
openssl.c:(.text+0x94e): undefined reference to `UI_method_get_writer'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `ssl_ui_reader':
openssl.c:(.text+0x97e): undefined reference to `UI_get_string_type'
openssl.c:(.text+0x98e): undefined reference to `UI_get0_user_data'
openssl.c:(.text+0x99e): undefined reference to `UI_get_input_flags'
openssl.c:(.text+0x9a7): undefined reference to `UI_OpenSSL'
openssl.c:(.text+0x9af): undefined reference to `UI_method_get_reader'
openssl.c:(.text+0x9ca): undefined reference to `UI_set_result'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `ossl_get_ssl_conn_index':
openssl.c:(.text+0xa03): undefined reference to `CRYPTO_get_ex_new_index'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `ossl_get_ssl_sockindex_index':
openssl.c:(.text+0xa43): undefined reference to `CRYPTO_get_ex_new_index'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `ossl_new_session_cb':
openssl.c:(.text+0xaa6): undefined reference to `SSL_get_ex_data'
openssl.c:(.text+0xabf): undefined reference to `SSL_get_ex_data'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `pubkey_show':
openssl.c:(.text+0xc2d): undefined reference to `BN_print'
openssl.c:(.text+0xc41): undefined reference to `BIO_ctrl'
openssl.c:(.text+0xc68): undefined reference to `BIO_ctrl'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `Curl_ossl_data_pending':
openssl.c:(.text+0xcb2): undefined reference to `SSL_pending'
openssl.c:(.text+0xcd9): undefined reference to `SSL_pending'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `Curl_ossl_shutdown':
openssl.c:(.text+0xdaa): undefined reference to `SSL_free'
openssl.c:(.text+0xdf1): undefined reference to `ERR_clear_error'
openssl.c:(.text+0xe0e): undefined reference to `SSL_read'
openssl.c:(.text+0xe20): undefined reference to `SSL_get_error'
openssl.c:(.text+0xe86): undefined reference to `ERR_get_error'
openssl.c:(.text+0xee1): undefined reference to `SSL_get_shutdown'
openssl.c:(.text+0xf31): undefined reference to `SSL_shutdown'
openssl.c:(.text+0xf6c): undefined reference to `ERR_error_string_n'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `Curl_ossl_version':
openssl.c:(.text+0x1074): undefined reference to `OpenSSL_version_num'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `ossl_send':
openssl.c:(.text+0x1191): undefined reference to `ERR_clear_error'
openssl.c:(.text+0x11bf): undefined reference to `SSL_write'
openssl.c:(.text+0x120e): undefined reference to `SSL_get_error'
openssl.c:(.text+0x122c): undefined reference to `ERR_get_error'
openssl.c:(.text+0x12c7): undefined reference to `ERR_error_string_n'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `Curl_ossl_init':
openssl.c:(.text+0x1377): undefined reference to `OPENSSL_load_builtin_modules'
openssl.c:(.text+0x137c): undefined reference to `ENGINE_load_builtin_engines'
openssl.c:(.text+0x138a): undefined reference to `CONF_modules_load_file'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `Curl_ossl_set_engine_default':
openssl.c:(.text+0x1460): undefined reference to `ENGINE_set_default'
openssl.c:(.text+0x1470): undefined reference to `ENGINE_get_id'
openssl.c:(.text+0x1499): undefined reference to `ENGINE_get_id'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `ossl_close.isra.2':
openssl.c:(.text+0x14d1): undefined reference to `SSL_shutdown'
openssl.c:(.text+0x14dd): undefined reference to `SSL_set_connect_state'
openssl.c:(.text+0x14e9): undefined reference to `SSL_free'
openssl.c:(.text+0x1501): undefined reference to `SSL_CTX_free'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `Curl_ossl_seed.part.4':
openssl.c:(.text+0x1649): undefined reference to `RAND_add'
openssl.c:(.text+0x164e): undefined reference to `RAND_status'
openssl.c:(.text+0x166a): undefined reference to `RAND_file_name'
openssl.c:(.text+0x1680): undefined reference to `RAND_load_file'
openssl.c:(.text+0x1685): undefined reference to `RAND_status'
openssl.c:(.text+0x16a1): undefined reference to `RAND_status'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `Curl_ossl_seed':
openssl.c:(.text+0x16f5): undefined reference to `RAND_status'
openssl.c:(.text+0x1718): undefined reference to `RAND_load_file'
openssl.c:(.text+0x171d): undefined reference to `RAND_status'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `ossl_connect_step1':
openssl.c:(.text+0x1a21): undefined reference to `TLS_client_method'
openssl.c:(.text+0x1a44): undefined reference to `SSL_CTX_free'
openssl.c:(.text+0x1a58): undefined reference to `SSL_CTX_new'
openssl.c:(.text+0x1a89): undefined reference to `SSL_CTX_ctrl'
openssl.c:(.text+0x1b45): undefined reference to `SSL_CTX_set_options'
openssl.c:(.text+0x1bb1): undefined reference to `SSL_CTX_set_cipher_list'
openssl.c:(.text+0x1c01): undefined reference to `X509_LOOKUP_file'
openssl.c:(.text+0x1c1c): undefined reference to `SSL_CTX_get_cert_store'
openssl.c:(.text+0x1c27): undefined reference to `X509_STORE_add_lookup'
openssl.c:(.text+0x1c45): undefined reference to `X509_load_crl_file'
openssl.c:(.text+0x1c6d): undefined reference to `SSL_CTX_get_cert_store'
openssl.c:(.text+0x1c7a): undefined reference to `X509_STORE_set_flags'
openssl.c:(.text+0x1cad): undefined reference to `SSL_CTX_set_verify'
openssl.c:(.text+0x1cc8): undefined reference to `SSL_CTX_ctrl'
openssl.c:(.text+0x1cde): undefined reference to `SSL_CTX_sess_set_new_cb'
openssl.c:(.text+0x1d2b): undefined reference to `SSL_free'
openssl.c:(.text+0x1d3b): undefined reference to `SSL_new'
openssl.c:(.text+0x1d82): undefined reference to `SSL_ctrl'
openssl.c:(.text+0x1d98): undefined reference to `SSL_set_connect_state'
openssl.c:(.text+0x1e0c): undefined reference to `BIO_f_ssl'
openssl.c:(.text+0x1e14): undefined reference to `BIO_new'
openssl.c:(.text+0x1e31): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x1e47): undefined reference to `SSL_set_bio'
openssl.c:(.text+0x1f92): undefined reference to `SSL_CTX_set_msg_callback'
openssl.c:(.text+0x1fab): undefined reference to `SSL_CTX_ctrl'
openssl.c:(.text+0x20bf): undefined reference to `ERR_peek_error'
openssl.c:(.text+0x20cf): undefined reference to `ERR_error_string_n'
openssl.c:(.text+0x2143): undefined reference to `SSL_CTX_set_alpn_protos'
openssl.c:(.text+0x2165): undefined reference to `SSL_CTX_set_next_proto_select_cb'
openssl.c:(.text+0x21b7): undefined reference to `SSL_CTX_set_default_passwd_cb_userdata'
openssl.c:(.text+0x21c6): undefined reference to `SSL_CTX_set_default_passwd_cb'
openssl.c:(.text+0x21fc): undefined reference to `BIO_s_file'
openssl.c:(.text+0x2204): undefined reference to `BIO_new'
openssl.c:(.text+0x2227): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x2239): undefined reference to `d2i_PKCS12_bio'
openssl.c:(.text+0x2246): undefined reference to `BIO_free'
openssl.c:(.text+0x2257): undefined reference to `PKCS12_PBE_add'
openssl.c:(.text+0x227b): undefined reference to `PKCS12_parse'
openssl.c:(.text+0x2290): undefined reference to `ERR_get_error'
openssl.c:(.text+0x22a0): undefined reference to `ERR_error_string_n'
openssl.c:(.text+0x22bc): undefined reference to `PKCS12_free'
openssl.c:(.text+0x230d): undefined reference to `SSL_CTX_set_srp_username'
openssl.c:(.text+0x233f): undefined reference to `SSL_CTX_set_srp_password'
openssl.c:(.text+0x2394): undefined reference to `SSL_CTX_set_cipher_list'
openssl.c:(.text+0x2479): undefined reference to `SSL_CTX_load_verify_locations'
openssl.c:(.text+0x257b): undefined reference to `SSL_set_fd'
openssl.c:(.text+0x2596): undefined reference to `ERR_get_error'
openssl.c:(.text+0x25a6): undefined reference to `ERR_error_string_n'
openssl.c:(.text+0x261e): undefined reference to `SSL_CTX_use_certificate_chain_file'
openssl.c:(.text+0x2634): undefined reference to `ERR_get_error'
openssl.c:(.text+0x2644): undefined reference to `ERR_error_string_n'
openssl.c:(.text+0x26ef): undefined reference to `SSL_ctrl'
openssl.c:(.text+0x2755): undefined reference to `SSL_set_ex_data'
openssl.c:(.text+0x2775): undefined reference to `SSL_set_ex_data'
openssl.c:(.text+0x27b5): undefined reference to `SSL_set_session'
openssl.c:(.text+0x287e): undefined reference to `X509_free'
openssl.c:(.text+0x295e): undefined reference to `ENGINE_ctrl'
openssl.c:(.text+0x29bf): undefined reference to `SSL_CTX_use_certificate_file'
openssl.c:(.text+0x29d5): undefined reference to `ERR_get_error'
openssl.c:(.text+0x29e5): undefined reference to `ERR_error_string_n'
openssl.c:(.text+0x2a8f): undefined reference to `SSL_CTX_use_PrivateKey_file'
openssl.c:(.text+0x2ace): undefined reference to `SSL_CTX_check_private_key'
openssl.c:(.text+0x2af0): undefined reference to `OPENSSL_sk_pop'
openssl.c:(.text+0x2b00): undefined reference to `SSL_CTX_add_client_CA'
openssl.c:(.text+0x2b1c): undefined reference to `SSL_CTX_ctrl'
openssl.c:(.text+0x2b32): undefined reference to `OPENSSL_sk_num'
openssl.c:(.text+0x2b40): undefined reference to `EVP_PKEY_free'
openssl.c:(.text+0x2b4a): undefined reference to `X509_free'
openssl.c:(.text+0x2b51): undefined reference to `X509_free'
openssl.c:(.text+0x2b5e): undefined reference to `OPENSSL_sk_pop_free'
openssl.c:(.text+0x2b8a): undefined reference to `SSL_new'
openssl.c:(.text+0x2b9e): undefined reference to `SSL_get_certificate'
openssl.c:(.text+0x2bb0): undefined reference to `X509_get_pubkey'
openssl.c:(.text+0x2bbd): undefined reference to `SSL_get_privatekey'
openssl.c:(.text+0x2bca): undefined reference to `EVP_PKEY_copy_parameters'
openssl.c:(.text+0x2bd4): undefined reference to `EVP_PKEY_free'
openssl.c:(.text+0x2bdc): undefined reference to `SSL_get_privatekey'
openssl.c:(.text+0x2be9): undefined reference to `EVP_PKEY_id'
openssl.c:(.text+0x2bff): undefined reference to `SSL_free'
openssl.c:(.text+0x2c09): undefined reference to `SSL_CTX_check_private_key'
openssl.c:(.text+0x2c5c): undefined reference to `ENGINE_ctrl_cmd'
openssl.c:(.text+0x2c7f): undefined reference to `SSL_CTX_use_certificate'
openssl.c:(.text+0x2ca6): undefined reference to `X509_free'
openssl.c:(.text+0x2d17): undefined reference to `ERR_get_error'
openssl.c:(.text+0x2d27): undefined reference to `ERR_error_string_n'
openssl.c:(.text+0x2d7e): undefined reference to `UI_create_method'
openssl.c:(.text+0x2d8f): undefined reference to `UI_OpenSSL'
openssl.c:(.text+0x2d97): undefined reference to `UI_method_get_opener'
openssl.c:(.text+0x2da2): undefined reference to `UI_method_set_opener'
openssl.c:(.text+0x2da7): undefined reference to `UI_OpenSSL'
openssl.c:(.text+0x2daf): undefined reference to `UI_method_get_closer'
openssl.c:(.text+0x2dba): undefined reference to `UI_method_set_closer'
openssl.c:(.text+0x2dc9): undefined reference to `UI_method_set_reader'
openssl.c:(.text+0x2dd8): undefined reference to `UI_method_set_writer'
openssl.c:(.text+0x2df1): undefined reference to `ENGINE_load_private_key'
openssl.c:(.text+0x2dfe): undefined reference to `UI_destroy_method'
openssl.c:(.text+0x2e1c): undefined reference to `SSL_CTX_use_PrivateKey'
openssl.c:(.text+0x2e3e): undefined reference to `EVP_PKEY_free'
openssl.c:(.text+0x2e61): undefined reference to `BIO_free'
openssl.c:(.text+0x2e81): undefined reference to `ERR_get_error'
openssl.c:(.text+0x2e91): undefined reference to `ERR_error_string_n'
openssl.c:(.text+0x2eb4): undefined reference to `PKCS12_free'
openssl.c:(.text+0x2ec3): undefined reference to `SSL_CTX_use_certificate'
openssl.c:(.text+0x2ed9): undefined reference to `ERR_get_error'
openssl.c:(.text+0x2ee9): undefined reference to `ERR_error_string_n'
openssl.c:(.text+0x2f07): undefined reference to `EVP_PKEY_free'
openssl.c:(.text+0x2f11): undefined reference to `X509_free'
openssl.c:(.text+0x2f18): undefined reference to `X509_free'
openssl.c:(.text+0x2f25): undefined reference to `OPENSSL_sk_pop_free'
openssl.c:(.text+0x2f6d): undefined reference to `ERR_get_error'
openssl.c:(.text+0x2f7d): undefined reference to `ERR_error_string_n'
openssl.c:(.text+0x2fca): undefined reference to `EVP_PKEY_get1_RSA'
openssl.c:(.text+0x2fd7): undefined reference to `RSA_flags'
openssl.c:(.text+0x2fe8): undefined reference to `RSA_free'
openssl.c:(.text+0x2ff0): undefined reference to `SSL_free'
openssl.c:(.text+0x3010): undefined reference to `SSL_CTX_use_PrivateKey'
openssl.c:(.text+0x309b): undefined reference to `EVP_PKEY_free'
openssl.c:(.text+0x30ed): undefined reference to `X509_free'
openssl.c:(.text+0x310b): undefined reference to `X509_free'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `ossl_connect_step2':
openssl.c:(.text+0x3178): undefined reference to `ERR_clear_error'
openssl.c:(.text+0x3191): undefined reference to `SSL_connect'
openssl.c:(.text+0x31a7): undefined reference to `SSL_get_session'
openssl.c:(.text+0x31e2): undefined reference to `SSL_get_client_random'
openssl.c:(.text+0x31f7): undefined reference to `SSL_SESSION_get_master_key'
openssl.c:(.text+0x33b4): undefined reference to `SSL_get_error'
openssl.c:(.text+0x33f6): undefined reference to `ERR_get_error'
openssl.c:(.text+0x3428): undefined reference to `SSL_get_verify_result'
openssl.c:(.text+0x344f): undefined reference to `X509_verify_cert_error_string'
openssl.c:(.text+0x34e4): undefined reference to `SSL_get_current_cipher'
openssl.c:(.text+0x34ec): undefined reference to `SSL_CIPHER_get_name'
openssl.c:(.text+0x350b): undefined reference to `SSL_version'
openssl.c:(.text+0x3587): undefined reference to `SSL_get0_alpn_selected'
openssl.c:(.text+0x3629): undefined reference to `ERR_error_string_n'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `Curl_ossl_random':
openssl.c:(.text+0x37b8): undefined reference to `RAND_bytes'
openssl.c:(.text+0x37d1): undefined reference to `RAND_status'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `x509_name_oneline.constprop.12':
openssl.c:(.text+0x38bf): undefined reference to `BIO_s_mem'
openssl.c:(.text+0x38c7): undefined reference to `BIO_new'
openssl.c:(.text+0x38e6): undefined reference to `X509_NAME_print_ex'
openssl.c:(.text+0x38fb): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x393a): undefined reference to `BIO_free'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `servercert':
openssl.c:(.text+0x3a31): undefined reference to `BIO_s_mem'
openssl.c:(.text+0x3a39): undefined reference to `BIO_new'
openssl.c:(.text+0x3a5c): undefined reference to `SSL_get_peer_certificate'
openssl.c:(.text+0x3ad7): undefined reference to `X509_get_subject_name'
openssl.c:(.text+0x3b0d): undefined reference to `X509_get0_notBefore'
openssl.c:(.text+0x3b1d): undefined reference to `ASN1_TIME_print'
openssl.c:(.text+0x3b2f): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x3b59): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x3b66): undefined reference to `X509_get0_notAfter'
openssl.c:(.text+0x3b71): undefined reference to `ASN1_TIME_print'
openssl.c:(.text+0x3b83): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x3bad): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x3bb5): undefined reference to `BIO_free'
openssl.c:(.text+0x3be8): undefined reference to `X509_get_issuer_name'
openssl.c:(.text+0x3c83): undefined reference to `X509_get_X509_PUBKEY'
openssl.c:(.text+0x3c8d): undefined reference to `i2d_X509_PUBKEY'
openssl.c:(.text+0x3cba): undefined reference to `X509_get_X509_PUBKEY'
openssl.c:(.text+0x3cca): undefined reference to `i2d_X509_PUBKEY'
openssl.c:(.text+0x3d05): undefined reference to `X509_free'
openssl.c:(.text+0x3dd8): undefined reference to `X509_get_ext_d2i'
openssl.c:(.text+0x3dec): undefined reference to `OPENSSL_sk_num'
openssl.c:(.text+0x3e41): undefined reference to `OPENSSL_sk_value'
openssl.c:(.text+0x3e74): undefined reference to `GENERAL_NAMES_free'
openssl.c:(.text+0x3ed0): undefined reference to `BIO_s_file'
openssl.c:(.text+0x3ed8): undefined reference to `BIO_new'
openssl.c:(.text+0x3f0f): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x3f25): undefined reference to `PEM_read_bio_X509'
openssl.c:(.text+0x3f41): undefined reference to `X509_check_issued'
openssl.c:(.text+0x3f7c): undefined reference to `BIO_free'
openssl.c:(.text+0x3f84): undefined reference to `X509_free'
openssl.c:(.text+0x3f91): undefined reference to `SSL_get_verify_result'
openssl.c:(.text+0x3fdd): undefined reference to `X509_verify_cert_error_string'
openssl.c:(.text+0x4050): undefined reference to `SSL_get_peer_cert_chain'
openssl.c:(.text+0x4066): undefined reference to `OPENSSL_sk_num'
openssl.c:(.text+0x4081): undefined reference to `BIO_s_mem'
openssl.c:(.text+0x4089): undefined reference to `BIO_new'
openssl.c:(.text+0x40c6): undefined reference to `OPENSSL_sk_value'
openssl.c:(.text+0x40df): undefined reference to `X509_get_subject_name'
openssl.c:(.text+0x40f1): undefined reference to `X509_NAME_print_ex'
openssl.c:(.text+0x4108): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x4138): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x4140): undefined reference to `X509_get_issuer_name'
openssl.c:(.text+0x4152): undefined reference to `X509_NAME_print_ex'
openssl.c:(.text+0x4164): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x418f): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x4197): undefined reference to `X509_get_version'
openssl.c:(.text+0x41ab): undefined reference to `BIO_printf'
openssl.c:(.text+0x41bd): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x41e8): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x41f0): undefined reference to `X509_get_serialNumber'
openssl.c:(.text+0x4225): undefined reference to `BIO_printf'
openssl.c:(.text+0x4248): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x427d): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x428e): undefined reference to `ASN1_STRING_new'
openssl.c:(.text+0x42b1): undefined reference to `X509_get0_signature'
openssl.c:(.text+0x42c4): undefined reference to `X509_signature_print'
openssl.c:(.text+0x42cc): undefined reference to `ASN1_STRING_free'
openssl.c:(.text+0x42e4): undefined reference to `i2a_ASN1_OBJECT'
openssl.c:(.text+0x42f6): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x4321): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x4332): undefined reference to `X509_get0_extensions'
openssl.c:(.text+0x433f): undefined reference to `OPENSSL_sk_num'
openssl.c:(.text+0x435b): undefined reference to `OPENSSL_sk_num'
openssl.c:(.text+0x4379): undefined reference to `OPENSSL_sk_value'
openssl.c:(.text+0x4381): undefined reference to `BIO_s_mem'
openssl.c:(.text+0x4389): undefined reference to `BIO_new'
openssl.c:(.text+0x439d): undefined reference to `X509_EXTENSION_get_object'
openssl.c:(.text+0x43ba): undefined reference to `i2t_ASN1_OBJECT'
openssl.c:(.text+0x43c9): undefined reference to `X509V3_EXT_print'
openssl.c:(.text+0x43f3): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x449a): undefined reference to `BIO_free'
openssl.c:(.text+0x44a4): undefined reference to `OPENSSL_sk_num'
openssl.c:(.text+0x44bf): undefined reference to `X509_get0_notBefore'
openssl.c:(.text+0x44ca): undefined reference to `ASN1_TIME_print'
openssl.c:(.text+0x44e1): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x4516): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x451e): undefined reference to `X509_get0_notAfter'
openssl.c:(.text+0x4529): undefined reference to `ASN1_TIME_print'
openssl.c:(.text+0x453b): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x4566): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x456e): undefined reference to `X509_get_pubkey'
openssl.c:(.text+0x4582): undefined reference to `EVP_PKEY_id'
openssl.c:(.text+0x45a5): undefined reference to `EVP_PKEY_get0_RSA'
openssl.c:(.text+0x45bf): undefined reference to `RSA_get0_key'
openssl.c:(.text+0x45cf): undefined reference to `BN_print'
openssl.c:(.text+0x45e3): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x4618): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x4668): undefined reference to `EVP_PKEY_free'
openssl.c:(.text+0x4699): undefined reference to `BIO_printf'
openssl.c:(.text+0x46bd): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x46eb): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x46f8): undefined reference to `PEM_write_bio_X509'
openssl.c:(.text+0x470c): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x473c): undefined reference to `BIO_ctrl'
openssl.c:(.text+0x4761): undefined reference to `BIO_free'
openssl.c:(.text+0x47da): undefined reference to `SSL_ctrl'
openssl.c:(.text+0x47f6): undefined reference to `d2i_OCSP_RESPONSE'
openssl.c:(.text+0x480a): undefined reference to `OCSP_response_status'
openssl.c:(.text+0x481d): undefined reference to `OCSP_response_get1_basic'
openssl.c:(.text+0x4836): undefined reference to `SSL_get_peer_cert_chain'
openssl.c:(.text+0x4847): undefined reference to `SSL_CTX_get_cert_store'
openssl.c:(.text+0x4859): undefined reference to `OCSP_basic_verify'
openssl.c:(.text+0x489f): undefined reference to `OCSP_resp_count'
openssl.c:(.text+0x48b3): undefined reference to `OCSP_resp_get0'
openssl.c:(.text+0x48d8): undefined reference to `OCSP_single_get0_status'
openssl.c:(.text+0x48fb): undefined reference to `OCSP_check_validity'
openssl.c:(.text+0x490b): undefined reference to `OCSP_cert_status_str'
openssl.c:(.text+0x4940): undefined reference to `OCSP_BASICRESP_free'
openssl.c:(.text+0x4948): undefined reference to `OCSP_RESPONSE_free'
openssl.c:(.text+0x49b8): undefined reference to `GENERAL_NAMES_free'
openssl.c:(.text+0x49d6): undefined reference to `X509_get_subject_name'
openssl.c:(.text+0x49f1): undefined reference to `X509_NAME_get_index_by_NID'
openssl.c:(.text+0x4a67): undefined reference to `CRYPTO_free'
openssl.c:(.text+0x4b6c): undefined reference to `X509_EXTENSION_get_data'
openssl.c:(.text+0x4b77): undefined reference to `ASN1_STRING_print'
openssl.c:(.text+0x4b9b): undefined reference to `BIO_free'
openssl.c:(.text+0x4bfa): undefined reference to `ASN1_STRING_get0_data'
openssl.c:(.text+0x4c08): undefined reference to `ASN1_STRING_length'
openssl.c:(.text+0x4c2b): undefined reference to `BIO_puts'
openssl.c:(.text+0x4c38): undefined reference to `EVP_PKEY_get0_DSA'
openssl.c:(.text+0x4c5b): undefined reference to `DSA_get0_pqg'
openssl.c:(.text+0x4c6d): undefined reference to `DSA_get0_key'
openssl.c:(.text+0x4d14): undefined reference to `EVP_PKEY_get0_DH'
openssl.c:(.text+0x4d37): undefined reference to `DH_get0_pqg'
openssl.c:(.text+0x4d49): undefined reference to `DH_get0_key'
openssl.c:(.text+0x4df1): undefined reference to `ASN1_STRING_get0_data'
openssl.c:(.text+0x4dff): undefined reference to `ASN1_STRING_length'
openssl.c:(.text+0x4e5d): undefined reference to `ASN1_STRING_get0_data'
openssl.c:(.text+0x4e6b): undefined reference to `ASN1_STRING_length'
openssl.c:(.text+0x4ecc): undefined reference to `GENERAL_NAMES_free'
openssl.c:(.text+0x4f1b): undefined reference to `X509_free'
openssl.c:(.text+0x4f73): undefined reference to `OCSP_response_status_str'
openssl.c:(.text+0x4f92): undefined reference to `OCSP_RESPONSE_free'
openssl.c:(.text+0x4fa4): undefined reference to `X509_free'
openssl.c:(.text+0x4ff2): undefined reference to `X509_NAME_get_entry'
openssl.c:(.text+0x4ffa): undefined reference to `X509_NAME_ENTRY_get_data'
openssl.c:(.text+0x500e): undefined reference to `ASN1_STRING_type'
openssl.c:(.text+0x5027): undefined reference to `ASN1_STRING_to_UTF8'
openssl.c:(.text+0x5109): undefined reference to `BIO_free'
openssl.c:(.text+0x5111): undefined reference to `X509_free'
openssl.c:(.text+0x5123): undefined reference to `X509_free'
openssl.c:(.text+0x516e): undefined reference to `BIO_free'
openssl.c:(.text+0x51ad): undefined reference to `X509_verify_cert_error_string'
openssl.c:(.text+0x5213): undefined reference to `OCSP_crl_reason_str'
openssl.c:(.text+0x5269): undefined reference to `BIO_free'
openssl.c:(.text+0x52fc): undefined reference to `OCSP_BASICRESP_free'
openssl.c:(.text+0x5306): undefined reference to `OCSP_RESPONSE_free'
openssl.c:(.text+0x5327): undefined reference to `CRYPTO_free'
openssl.c:(.text+0x5345): undefined reference to `OCSP_BASICRESP_free'
openssl.c:(.text+0x534d): undefined reference to `OCSP_RESPONSE_free'
openssl.c:(.text+0x535f): undefined reference to `ERR_get_error'
openssl.c:(.text+0x536f): undefined reference to `ERR_error_string_n'
openssl.c:(.text+0x5396): undefined reference to `X509_free'
openssl.c:(.text+0x53af): undefined reference to `ASN1_STRING_length'
openssl.c:(.text+0x53d0): undefined reference to `CRYPTO_malloc'
openssl.c:(.text+0x53ec): undefined reference to `ASN1_STRING_get0_data'
/usr/local/lib/libcurl.a(libcurl_la-openssl.o): In function `Curl_ossl_session_free':
openssl.c:(.text+0x3f1): undefined reference to `SSL_SESSION_free'
/usr/local/lib/libcurl.a(libcurl_la-curl_ntlm_core.o): In function `setup_des_key':
curl_ntlm_core.c:(.text+0x97): undefined reference to `DES_set_odd_parity'
curl_ntlm_core.c:(.text+0xa2): undefined reference to `DES_set_key'
/usr/local/lib/libcurl.a(libcurl_la-curl_ntlm_core.o): In function `Curl_ntlm_core_lm_resp':
curl_ntlm_core.c:(.text+0x113): undefined reference to `DES_ecb_encrypt'
curl_ntlm_core.c:(.text+0x134): undefined reference to `DES_ecb_encrypt'
curl_ntlm_core.c:(.text+0x155): undefined reference to `DES_ecb_encrypt'
/usr/local/lib/libcurl.a(libcurl_la-curl_ntlm_core.o): In function `Curl_ntlm_core_mk_lm_hash':
curl_ntlm_core.c:(.text+0x228): undefined reference to `DES_ecb_encrypt'
curl_ntlm_core.c:(.text+0x24d): undefined reference to `DES_ecb_encrypt'
/usr/local/lib/libcurl.a(libcurl_la-curl_ntlm_core.o): In function `Curl_ntlm_core_mk_nt_hash':
curl_ntlm_core.c:(.text+0x395): undefined reference to `MD4_Init'
curl_ntlm_core.c:(.text+0x3a3): undefined reference to `MD4_Update'
curl_ntlm_core.c:(.text+0x3ae): undefined reference to `MD4_Final'
collect2: error: ld returned 1 exit status
make[2]: *** [cgminer] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
Thoughts? Suggestions?
Curious. Branch r606 compiled just fine on the rig which has been faithfully running my compac and 2pacs. The old HP Mini is running 32-bit Bodhi Linux (Ubuntu 16.04.) It will take me some time to sort out why the PiMP (Ubuntu 18.04) rig is throwing libcurl-openssl errors at compile time. The libcurl4-openssl-dev package appears properly installed; at least, that's what apt tell me.
In the mean-time, I switched the USB cable over to the Mini and ... pow! Everything seems to work. Almost.
On a machine where User had already been granted USB driver access privileges, branch r606 refuses to look for devices unless cgminer is run as root.
Some observations when mixing BM1384 and BM1387 sticks in the same running instance of cgminer:
Note: all setting are made in cgminer.conf
- If gekko-newpac-freq is declared before gekko-2pac-freq then the newpacs are set with the 2pac frequency.
- gekko-start-freq, gekko-step-freq, and gekko-step-delay do not function at all, where in main branch they work just fine, but only for the 2pacs.
- I had to explicitly declare gekko-newpac-detect in order for the newpacs to be found by the driver.
** Once I did that, only the newpacs were found by the driver until I declared gekko-compac-detect and gekko-2pac-detect.
** -detect declarations must happen immediately before the corresponding -freq declaration, with no other settings between. - In spite of declaring compac and 2pac freqs higher, they are apparently restricted to 200MHz.
** Initially ("widescreen" : true) the display indicates the declared frequency values (200/300/xxx), but only runs them at 200MHz. Then, autotune(?) drops their freq by a bit and the display changes to show only the active frequency. (194/194/194)
** H/s rates are appropriate for the reported frequencies, however.
In a GS hub, you cannot, apparently, pair 2pacs on the same power controller above 200MHz. One of them will drop out with a Found 0 chips error. They pair just fine with a newpac, though. This is the case on both master and r606 branch.
May 13, 2020, 08:07:59 AM
Sounds to me like he's mining the alt's with CPU cores.
ok that is what i thought he might mean but wanted to make sure he hadnt found some impossible way to mine xmr with the r606 - I would want to do that asap myself lol.
Jump to: