Topic: Gigabyte-GA-H110-D3A Mining board SUCKS! Can't get 6gpu up and running - page 6. (Read 25643 times)
November 24, 2017, 06:56:25 AM
First things fist - have you flashed the bios? I have two rigs based on these boards, each with 6 gpu`s, working just fine. I also had issues first day to get those cards reckognized by the system. Install the windows and the drivers with just one card, then go with adding cards one by one. Also, check are all of your risers functional.
November 24, 2017, 06:52:50 AM
I really like this board, it works great. But it needs a little more then crying about it like a kid. You need to update the bios and enable the mining mod. Which is stated even in their website...
November 24, 2017, 06:41:20 AM
I have so many problems with this board. Probably just bios fucking me over all the time. I have 3x 1060 3gb and 3x p106-100 mining
Can't seem to get to work with 6gpus at the time. All 6 of them work fine separately. But when I plug them in all together I am stuck at Windows logo screen and the loading circle keeps circling.
I have tried enabling 4g decoding and then I don't even get to the windows screen. I tried switching to GEN1 and GEN2 still nothing. I did Windows 8.1/10 WHQL Support -> Enabled too.
Is there anything I am missing out? I once get them to boot with all 6, but then one GPU showed me following error: "This device cannot find enough free resources that it can use. (Code 12).
I restarted and added 4gb RAM and didn't get it up and running.
I have few rigs with asrock pro btc h81 r2.0 and didn't had a problem with them at all. Then there was a time I coudn't get any cpu for Asrock motherboard so had to buy this one..
Anyone with similar problems?
Can't seem to get to work with 6gpus at the time. All 6 of them work fine separately. But when I plug them in all together I am stuck at Windows logo screen and the loading circle keeps circling.
I have tried enabling 4g decoding and then I don't even get to the windows screen. I tried switching to GEN1 and GEN2 still nothing. I did Windows 8.1/10 WHQL Support -> Enabled too.
Is there anything I am missing out? I once get them to boot with all 6, but then one GPU showed me following error: "This device cannot find enough free resources that it can use. (Code 12).
I restarted and added 4gb RAM and didn't get it up and running.
I have few rigs with asrock pro btc h81 r2.0 and didn't had a problem with them at all. Then there was a time I coudn't get any cpu for Asrock motherboard so had to buy this one..
Anyone with similar problems?
Jump to: