GMiner v3.24 Ergo+KASPA+ZIL/KAWPOW/Equihash/Cortex - page 106.

vkorzha

newbie

Activity: 3

Merit: 0

Quote from: ?? on ??

Quote from: Elange on February 03, 2019, 07:04:46 AM

Quote from: rgsnedds on February 03, 2019, 06:34:01 AM

If anyone needs help with this, pop in to the support links in my sig on discord or telegram.

happy to help where needed.

Post solution here. It's a forum, not a personal market-place.

i'm just a miner. not selling anything. my help is specific to nicehash which is having issues with one coin. this is the miner which you are likely using so it's not miner-specific. I'd rather keep this thread clean for miner-related issues.

Please post command line that works with nicehash, all I get rejected shares.

Elange

newbie

Activity: 73

Merit: 0

Quote from: rgsnedds on February 03, 2019, 06:34:01 AM

If anyone needs help with this, pop in to the support links in my sig on discord or telegram.

happy to help where needed.

Post solution here. It's a forum, not a personal market-place.

rgsnedds

member

Activity: 952

Merit: 17

raskul

If you are mining nicehash to Beam pools, be aware that NH has errors, it's a bug in the nicehash system.
You will see some warning message in the miner, but please check your valid shares at poolside... the nicehash system will show you 100% invalid shares, but it pool you will see the correct output of your miner.
This was discovered by the op of Sunpool and nicehash support have been a little less than helpful in their responses to this. If anyone needs help with this, pop in to the support links in my sig on discord or telegram.

happy to help where needed.

webgkv

newbie

Activity: 57

Merit: 0

Version 1.26 also does not work with NH

oberrz

newbie

Activity: 20

Merit: 0

1.25 after 1 hour NiceHash bug shows up

alexmpa

newbie

Activity: 28

Merit: 1

Quote from: Alexdie on February 03, 2019, 04:12:33 AM

nicehash, BEAM alg.

13:11:08 Share Rejected: Invalid nonce; is miner not compatible with NiceHash?
13:11:11 Share Accepted
13:11:12 Share Rejected: Invalid nonce; is miner not compatible with NiceHash?
13:11:15 Share Rejected: Invalid nonce; is miner not compatible with NiceHash?
13:11:16 New Job: 1722041521778 Difficulty: 117440512
13:11:19 Share Rejected: Invalid nonce; is miner not compatible with NiceHash?
13:11:29 Share Rejected: Invalid nonce; is miner not compatible with NiceHash?
...

Normal ?

No, it's known problem of gminer. Or maybe nicehash itself, hard to say till there is a fix available.

Alexdie

newbie

Activity: 5

Merit: 0

nicehash, BEAM alg.

13:11:08 Share Rejected: Invalid nonce; is miner not compatible with NiceHash?
13:11:11 Share Accepted
13:11:12 Share Rejected: Invalid nonce; is miner not compatible with NiceHash?
13:11:15 Share Rejected: Invalid nonce; is miner not compatible with NiceHash?
13:11:16 New Job: 1722041521778 Difficulty: 117440512
13:11:19 Share Rejected: Invalid nonce; is miner not compatible with NiceHash?
13:11:29 Share Rejected: Invalid nonce; is miner not compatible with NiceHash?
...

Normal ?

Dmitry69

newbie

Activity: 35

Merit: 0

Quote from: kkekoa on February 01, 2019, 10:47:16 PM

I have the same problem. gminer 1.25 works on my MSI notebook with two 1070s. On my rig with seven 1070s, I get the "out of memory error" unless I restrict the GPUs to devices 5, 6 and 7. I'm using Cuda 10 drivers 411.31 on the notebook and 417.35 on the rig. Does anyone have the problem with Cuda 9.x drivers?

The swap file must be increased to 40-48GB

kkekoa

newbie

Activity: 2

Merit: 0

I have the same problem. gminer 1.25 works on my MSI notebook with two 1070s. On my rig with seven 1070s, I get the "out of memory error" unless I restrict the GPUs to devices 5, 6 and 7. I'm using Cuda 10 drivers 411.31 on the notebook and 417.35 on the rig. Does anyone have the problem with Cuda 9.x drivers?

Joshwaa

hero member

Activity: 497

Merit: 500

Just confirmed on my multi gpu rigs. If I only enable one gpu to mine Beam then it works more than one and I get the error.

razerf

newbie

Activity: 15

Merit: 0

i have not problem with 1.25 and nicehash and beam...

Joshwaa

hero member

Activity: 497

Merit: 500

I am not sure if this helps but all my multi gpu rigs die on Beam. The one rig I have going with only one gpu keeps going for much longer and doesn't die but for a couple minutes.

Divinity666

jr. member

Activity: 312

Merit: 2

I believe its just nicehash servers and not gminer. Both europe and usa "die" from time to time today, you can see that when their h\r drops to almost 0, it I doubt 100% of miners use gminer.

Joshwaa

hero member

Activity: 497

Merit: 500

Quote from: Zminer777 on February 01, 2019, 01:48:13 PM

sorry for the bad update, will fix soon, need more testing.

Let me know if you need someone to test for you.

Zminer777

member

Activity: 488

Merit: 37

sorry for the bad update, will fix soon, need more testing.

annapotpot

jr. member

Activity: 330

Merit: 1

Quote from: Zminer777 on February 01, 2019, 01:25:26 PM

GMiner v1.26 available for download

v1.26
+ fixed bug with NiceHash mining for BEAM

Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta

Download links:
Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw
Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A

What exactly was the problem? Is it the nonceprefix parameter on job messages?

bugnotme

newbie

Activity: 10

Merit: 0

+1

Got ...

Quote

Share Rejected: Share above target.

... immediately after starting mining Sad

fdov

newbie

Activity: 7

Merit: 0

Quote from: Zminer777 on February 01, 2019, 01:25:26 PM

GMiner v1.26 available for download

v1.26
+ fixed bug with NiceHash mining for BEAM

Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta

Download links:
Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw
Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A

Fix does not work for me.

Error message changed to this:

Code:

18:41:51 Share Rejected: Share above target.
18:41:53 New Job: 1704196487166 Difficulty: 117440512
18:41:53 Share Rejected: Share above target.
18:41:59 Share Rejected: Share above target.
18:41:59 Share Rejected: Share above target.
18:42:02 Share Rejected: Share above target.
18:42:02 Share Rejected: Share above target.
18:42:09 Share Rejected: Share above target.
18:42:10 Share Rejected: Share above target.
18:42:14 New Job: 1704196489541 Difficulty: 117440512
18:42:14 Share Rejected: Share above target.
18:42:14 Share Rejected: Share above target.
18:42:15 Share Rejected: Share above target.
18:42:15 Share Rejected: Share above target.

BrucoMining

newbie

Activity: 18

Merit: 0

Quote from: Zminer777 on February 01, 2019, 01:25:26 PM

GMiner v1.26 available for download

v1.26
+ fixed bug with NiceHash mining for BEAM

Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta

Download links:
Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw
Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A

I get lots of share above target errors, 50% rejected rate, on gtx 1070, with 1.26

Zminer777

member

Activity: 488

Merit: 37

GMiner v1.26 available for download

v1.26
+ fixed bug with NiceHash mining for BEAM

Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta

Download links:
Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw
Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A

Topic: GMiner v3.24 Ergo+KASPA+ZIL/KAWPOW/Equihash/Cortex - page 106. (Read 306650 times)