yes, it's under win 7. How you solved it? Moved to win10?
Try update driver, better move to linux, because Windows 10 reserves more than 10% of VRAM, so current version of miner will work only for 11GB cards under Windows 10. 
Topic: GMiner v3.24 Ergo+KASPA+ZIL/KAWPOW/Equihash/Cortex - page 116. (Read 307141 times)
I guess you have used Windows 7, right? I saw same problem on Windows 7, bminer has same problem, I think there is some problem with driver version/OS.
yes, it's under win 7. How you solved it? Moved to win10?
Gminer isn't working fine on multigpu rig with 5 1070 on GRIN. When I run 1 instance of miner I get 1.2 g/s per card and 6 g/s total and 5-6% CPU load. When I run 5 instances - 1 per card - I get 2.5 from every card and 25-30% CPU load
I guess you have used Windows 7, right? I saw same problem on Windows 7, bminer has same problem, I think there is some problem with driver version/OS. 6 1080 ti:
13:15:36 Failed to initialize miner on GPU4: ZOTAC GeForce GTX 1080 Ti 11GB: out of memory
13:15:36 Failed to initialize miner on GPU5: ZOTAC GeForce GTX 1080 Ti 11GB: out of memory
make you pagefile bigger. try up to 66Gb 13:15:36 Failed to initialize miner on GPU4: ZOTAC GeForce GTX 1080 Ti 11GB: out of memory
13:15:36 Failed to initialize miner on GPU5: ZOTAC GeForce GTX 1080 Ti 11GB: out of memory
6 1080 ti:
13:15:36 Failed to initialize miner on GPU4: ZOTAC GeForce GTX 1080 Ti 11GB: out of memory
13:15:36 Failed to initialize miner on GPU5: ZOTAC GeForce GTX 1080 Ti 11GB: out of memory
13:15:36 Failed to initialize miner on GPU4: ZOTAC GeForce GTX 1080 Ti 11GB: out of memory
13:15:36 Failed to initialize miner on GPU5: ZOTAC GeForce GTX 1080 Ti 11GB: out of memory
GMiner v1.20 available for download
v1.20
+ reduced CPU usage up to 1.5-2x for Cuckaroo29 algorithm
This update addressed to users with 8+ GPU farms with slow CPU, it should improve your hashrate.
We will release optimized CUDA kernels on next week.
NOTE: Cuckaroo 29 algorithm requires computations on CPU, if your CPU loaded to 100% miner throttle GPUs.
Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta
Download links:
Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw
Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A
does not work 11-1070 Grin v1.20
+ reduced CPU usage up to 1.5-2x for Cuckaroo29 algorithm
This update addressed to users with 8+ GPU farms with slow CPU, it should improve your hashrate.
We will release optimized CUDA kernels on next week.
NOTE: Cuckaroo 29 algorithm requires computations on CPU, if your CPU loaded to 100% miner throttle GPUs.
Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta
Download links:
Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw
Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A
Gminer isn't working fine on multigpu rig with 5 1070 on GRIN. When I run 1 instance of miner I get 1.2 g/s per card and 6 g/s total and 5-6% CPU load. When I run 5 instances - 1 per card - I get 2.5 from every card and 25-30% CPU load
cant seem to get it to work with grinmint pool any config any body got working?
Below is GMiner uptime before crash. Each rig is 8x GTX 1070.
heater3 rig
heater2 rig
heater1 rig
heater3 rig
Code:
18:01:07 Uptime: 0d 00:23:30 Electricity: 0.348kWh $0.04
18:01:22 Miner terminated, watchdog will restart process after 10 seconds
18:03:10 Uptime: 0d 00:01:30 Electricity: 0.022kWh $0.00
18:03:25 Miner terminated, watchdog will restart process after 10 seconds
18:49:13 Uptime: 0d 00:45:30 Electricity: 0.669kWh $0.08
18:49:17 Miner terminated, watchdog will restart process after 10 seconds
heater2 rig
Code:
18:20:56 Uptime: 0d 00:44:01 Electricity: 0.646kWh $0.08
18:21:20 Miner terminated, watchdog will restart process after 10 seconds
heater1 rig
Code:
18:09:27 Uptime: 0d 00:34:01 Electricity: 0.500kWh $0.06
18:09:31 Miner terminated, watchdog will restart process after 10 seconds
18:40:19 Uptime: 0d 00:30:30 Electricity: 0.448kWh $0.05
18:40:43 Miner terminated, watchdog will restart process after 10 seconds
19:01:01 Uptime: 0d 00:20:00 Electricity: 0.293kWh $0.04
19:01:06 Miner terminated, watchdog will restart process after 10 seconds
Getting segfaults on v1.20 mining GRIN. Didn't happen on v1.19. Three different rigs
Thank you for the report, what's uptime before crash? how many GPUs?
Getting segfaults on v1.20 mining GRIN. Didn't happen on v1.19. Three different rigs
dmesg
miner log
dmesg
miner log
dmesg
miner log
dmesg
Code:
Jan 19 18:01:20 heater3 kernel: [169200.518676] traps: miner[14672] general protection ip:43f73a sp:7fddbcdfca80 error:0
Jan 19 18:03:24 heater3 kernel: [169323.721784] miner[14892]: segfault at 7f3f18356760 ip 000000000043f73a sp 00007f171d7f9a80 error 4
Code:
18:01:22 Miner terminated, watchdog will restart process after 10 seconds
18:03:25 Miner terminated, watchdog will restart process after 10 seconds
dmesg
Code:
Jan 19 18:21:18 heater2 kernel: [127743.961280] miner[10807]: segfault at 7fc58743c9c0 ip 000000000043f73a sp 00007f96889fda80 error 4
Code:
18:21:20 Miner terminated, watchdog will restart process after 10 seconds
dmesg
Code:
Jan 19 18:09:29 heater1 kernel: [80227.703206] miner[7514]: segfault at 7f58b0b67740 ip 000000000043f73a sp 00007f309b7fda80 error 4
Code:
18:09:31 Miner terminated, watchdog will restart process after 10 seconds
Thanks for version 1.20. Cpu load has improved on my 8-card rig to 85% cpu load which is ok. But I get Memory Error on GPU and the miner fails after a minute or two. It's getting close for 8-card rigs. my smaller rigs do good with it. Hopefully the efficiency will increase soon. Bminer is still faster. Gminer is more consistant with all matching Gpu's mining at the same rate. I trust Gminer so much more than all the other miners. I always try the other ones to make sure I'm making the most coin and Gminer has remained the leader since it first came out. Thanks for the hard work!
v1.19 take 21%+ CPU load for me, Thanks for update v1.20 ~10% CPU load now.
Hyжнa пoмoщь для зeлeнoгo для f2pool. oчeнь
What's problem? ask your question in telegram. GMiner v1.20 available for download
v1.20
+ reduced CPU usage up to 1.5-2x for Cuckaroo29 algorithm
This update addressed to users with 8+ GPU farms with slow CPU, it should improve your hashrate.
We will release optimized CUDA kernels on next week.
NOTE: Cuckaroo 29 algorithm requires computations on CPU, if your CPU loaded to 100% miner throttle GPUs.
Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta
Download links:
Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw
Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A
Hyжнa пoмoщь для зeлeнoгo для f2pool. oчeнь v1.20
+ reduced CPU usage up to 1.5-2x for Cuckaroo29 algorithm
This update addressed to users with 8+ GPU farms with slow CPU, it should improve your hashrate.
We will release optimized CUDA kernels on next week.
NOTE: Cuckaroo 29 algorithm requires computations on CPU, if your CPU loaded to 100% miner throttle GPUs.
Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta
Download links:
Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw
Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A
GMiner v1.20 available for download
v1.20
+ reduced CPU usage up to 1.5-2x for Cuckaroo29 algorithm
This update addressed to users with 8+ GPU farms with slow CPU, it should improve your hashrate.
We will release optimized CUDA kernels on next week.
NOTE: Cuckaroo 29 algorithm requires computations on CPU, if your CPU loaded to 100% miner throttle GPUs.
Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta
Download links:
Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw
Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A
v1.20
+ reduced CPU usage up to 1.5-2x for Cuckaroo29 algorithm
This update addressed to users with 8+ GPU farms with slow CPU, it should improve your hashrate.
We will release optimized CUDA kernels on next week.
NOTE: Cuckaroo 29 algorithm requires computations on CPU, if your CPU loaded to 100% miner throttle GPUs.
Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta
Download links:
Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw
Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A
Did anyone solve the problem with low speed for gtx 1080ti? I have one rig on 4+ and another 2.8 only. Win10, 417+ driver. Virtual memory is 70+
Need some help for green for f2pool.
1 of 1070 card not responding on green - on other algo all is good. rig 7 cards. 50 g virtual.
1 of 1070 card not responding on green - on other algo all is good. rig 7 cards. 50 g virtual.
bminer has no issues, and it finds about 1 solution every 2 seconds.
Needs a lot more optimisation it seems
. Come on, you can do it! I'd like to switch away from bminer.+1
I also have that opinion!
note crosspost from bminer:
while bminer turns my 4 card rig to 3 G/s per 1080ti, this one..gminer 1.19 gives only 1.5 G/s per card
v. 12.1.0
both windows 7 and driver 417.35
1080ti 1 card rig: ~6 G/s
1080ti 4 card rig: ~3 G/s per card
any possible problem with the 4 card rig?, power and temps are down too in the 4 card rig..nothing power limit and clocks can do, increasing to 120 power limit will gain 0.2 G/s max. with occasional miner crash/restart.
with 391.35 on 4 card rig, no occasional miner crash/restart but still ~3 G/s per card
both windows 7 and driver 417.35
1080ti 1 card rig: ~6 G/s
1080ti 4 card rig: ~3 G/s per card
any possible problem with the 4 card rig?, power and temps are down too in the 4 card rig..nothing power limit and clocks can do, increasing to 120 power limit will gain 0.2 G/s max. with occasional miner crash/restart.
with 391.35 on 4 card rig, no occasional miner crash/restart but still ~3 G/s per card
while bminer turns my 4 card rig to 3 G/s per 1080ti, this one..gminer 1.19 gives only 1.5 G/s per card
found the issue, to run at 5.x G/s for 1080ti ---->max of 3 cards only for bminer..seems amount of cards is an issue..
Yes! The same problem! Win 7, Rig with 6 1080ti - 1.95 G/s per GPU , gminer only 0.9 G/s per card. Rig with 5 1080ti - ~ 2.6G/s per card. Driver 417.35(was try 411 also).
Jump to: