I just received one of my boards ( H81 Pro BTC R2.0) from warranty today (took 1month + some days).
Got completely new board from AsRock, the old one did not even POST (was completely new board).
Hope You get Your rig up and running!
Topic: GPU Problem with my new rig (Read 655 times)
It seems that AsRock mining MOBOs are a gamble to get nowadays
I just received one of my boards ( H81 Pro BTC R2.0) from warranty today (took 1month + some days).
Got completely new board from AsRock, the old one did not even POST (was completely new board).
Hope You get Your rig up and running!
I just received one of my boards ( H81 Pro BTC R2.0) from warranty today (took 1month + some days).
Got completely new board from AsRock, the old one did not even POST (was completely new board).
Hope You get Your rig up and running!
It's me again.
Yes the extra power supply is connected - even though it shouldn't matter with active risers but I just wanted to make sure.
Also tried the bcdedit and that didn't help either - sadly.
I'm really thinking about setting up the whole darn thing from scratch again.
Have to go to the next shift now and hope somebody else still has some ideas.
Yes the extra power supply is connected - even though it shouldn't matter with active risers but I just wanted to make sure.
Also tried the bcdedit and that didn't help either - sadly.
I'm really thinking about setting up the whole darn thing from scratch again.
Have to go to the next shift now and hope somebody else still has some ideas.
bcdedit /set pciexpress forcedisable
This was posted in this forum for similar problem ( it's about bios settings ) :
https://www.youtube.com/watch?v=H-Ttlv9Sg28
Do you have connected both the 2 4-pin power PCIE connectors right?...i think you did but...
If it doesn't work i would reset cmos reinstall OS, modo driver and then add 1 card, reboot, add another and so on...
https://www.youtube.com/watch?v=H-Ttlv9Sg28
Do you have connected both the 2 4-pin power PCIE connectors right?...i think you did but...
If it doesn't work i would reset cmos reinstall OS, modo driver and then add 1 card, reboot, add another and so on...
Still I don't understand why there is always one GPU not working.
3 of 4 work fine and if I take out the fourth only 2 of 3 work...
Thats whats bothering me.
3 of 4 work fine and if I take out the fourth only 2 of 3 work...
Thats whats bothering me.
Perhaps the problem with the BIOS of the GPU or driver. I had a similar problem when I used the GPU with the native BIOS and upgraded the BIOS. Perhaps your installation is automatically updated the driver and now there is a hardware conflict. In any case, miracles do not happen and you need to understand. First my setup retuned my friend through teamviwer for 2 days.
update the motherboard bios and try again
the bios is on version 1.20 which should be the newest one.
update the motherboard bios and try again
I had the same problem and was the "virtual memory" ( i call it page file or swap file.... ).
Try this commad in to powershell if the value is lower than 16256 you didn't set it correctly.
Command:
Get-WMIObject Win32_PageFileSetting
Output example:
PS C:\Users\admin> Get-WMIObject Win32_PageFileSetting
MaximumSize Name Caption
----------- ---- -------
16256 c:\pagefile.sys c:\ 'pagefile.sys'
Try this commad in to powershell if the value is lower than 16256 you didn't set it correctly.
Command:
Get-WMIObject Win32_PageFileSetting
Output example:
PS C:\Users\admin> Get-WMIObject Win32_PageFileSetting
MaximumSize Name Caption
----------- ---- -------
16256 c:\pagefile.sys c:\ 'pagefile.sys'
Hey,
Am back after a long nightshift.
So I've tried this out and it says 16256 is allocated.
Still not working.
Regarding the "enable 4g decoding" the bios doesn't feature that option, since it should be preconfigured for mining.
I still don't understand why three cards work when I plug in four, but only two cards work when I plug in three...
Strange thing.
you must to enable 4g encoding
I found the Z270 to be fairly easy to set up compared to the H81 Pro.
But the Z270 is also a different price category.
But the Z270 is also a different price category.
lol,
Don't feel bad, I have the same board and I'm having issues also. I was usually using biostar which I just plugged in the risers, cards, booted and it worked great. This board was cheaper so I figured I'd give one a try. I played around with this board for about 2 hours and put it back in the box for a different day....
Don't feel bad, I have the same board and I'm having issues also. I was usually using biostar which I just plugged in the risers, cards, booted and it worked great. This board was cheaper so I figured I'd give one a try. I played around with this board for about 2 hours and put it back in the box for a different day....
I had the same problem and was the "virtual memory" ( i call it page file or swap file.... ).
Try this commad in to powershell if the value is lower than 16256 you didn't set it correctly.
Command:
Get-WMIObject Win32_PageFileSetting
Output example:
PS C:\Users\admin> Get-WMIObject Win32_PageFileSetting
MaximumSize Name Caption
----------- ---- -------
16256 c:\pagefile.sys c:\ 'pagefile.sys'
Try this commad in to powershell if the value is lower than 16256 you didn't set it correctly.
Command:
Get-WMIObject Win32_PageFileSetting
Output example:
PS C:\Users\admin> Get-WMIObject Win32_PageFileSetting
MaximumSize Name Caption
----------- ---- -------
16256 c:\pagefile.sys c:\ 'pagefile.sys'
Running 5 Cards + iGPU and 6 Cards + iGPU with G1840 CPU without any probs.
Bios up to date? Latest is P 1.20.
Bios up to date? Latest is P 1.20.
Running 5 Cards + iGPU with G1820 and no problems
Running 5 Cards + iGPU and 6 Cards + iGPU with G1840 CPU without any probs.
Bios up to date? Latest is P 1.20.
Bios up to date? Latest is P 1.20.
This is one of the most annoying errors. Also try to disable and enable the GPU with the error in the device manager.
Switch the pcie lanes, try GEN1/GEN2. The H81 also has a mining specific option in the BIOS try to enable/disable it.
Switch the pcie lanes, try GEN1/GEN2. The H81 also has a mining specific option in the BIOS try to enable/disable it.
Just a wild guess but maybe you have another CPU with 1150 socket. I have seen multiple topics with this "error code 12" and a lot of them have been using this G3260 CPU, for example https://bitcointalksearch.org/topic/issues-with-my-new-mining-setup-seeking-advice-2307023
Also, are you running the latest BIOS on your mobo?
Also, are you running the latest BIOS on your mobo?
Hey guys,
trying my luck today and does anyone else has an idea what the problem could be?
Cheers.
trying my luck today and does anyone else has an idea what the problem could be?
Cheers.
Have You enabled PCI-E GEN1 (also try GEN2) from the motherboard's BIOS? Also, have you set your virtual RAM to 16-24GB?
Have tried both GEN1 and GEN2, both didnt work.
Also I can't find an option in the BIOS to set virtual RAM to 16-24GB.
I think this was actually supposed to say virtual memory. And you set in windows not BIOS. If you have graphic card on motherboard try turning it of as well as all other extras you can in BIOS.
Yeah, meant virtual memory!
I have a very similar config with 6x 560 on this board. did you disable onboard igfx and audio, is win10 installed in uefi mode?
Audio is definitiv disabled, onboard igfx not sure, will check it tomorrow at home (currently at the nightshift). Win10 is installed on uefi mode.
Jump to: