Topic: GPU Rig PORN - page 4. (Read 24809 times)
Dang. These are some beautiful setups. I'll share mine soon once I neaten the wires... but it's definitely not as sexy, haha!
How much did the temperature drop after completing the wind tunnel setup? (both ambient temp and the GPU temps) Nice setup with the racks, nice and compact. 
MY WIND TUNNEL GPU RIG!
So I wanted to run six rigs with six gpus each, 36 total. The problem was that I live in a one bedroom apt. So I had to get some serious ventilation to make it habitable. Before this setup was complete it was 86F with A/C on 24/7. Most people build the rigs with the mobo and gpus all in one frame. I took a different approach. Here it is from start to finish. Enjoy.
The first picture is my original mess that took up too much room and caused heating issues. After that I knew I needed a new idea.
http://imgur.com/S7sD3Ip
http://imgur.com/5OT5EBb
The frames only hold the GPUs.
http://imgur.com/ec4vVe4
http://imgur.com/Mdw4wWr
http://imgur.com/96SCG2m
http://imgur.com/54Gz15g
http://imgur.com/lPYghMX
http://imgur.com/VFg3y1L
http://imgur.com/YawSFjA
http://imgur.com/fmL0KSr
http://imgur.com/FGjYkns
So I wanted to run six rigs with six gpus each, 36 total. The problem was that I live in a one bedroom apt. So I had to get some serious ventilation to make it habitable. Before this setup was complete it was 86F with A/C on 24/7. Most people build the rigs with the mobo and gpus all in one frame. I took a different approach. Here it is from start to finish. Enjoy.
The first picture is my original mess that took up too much room and caused heating issues. After that I knew I needed a new idea.
http://imgur.com/S7sD3Ip
http://imgur.com/5OT5EBb
The frames only hold the GPUs.
http://imgur.com/ec4vVe4
http://imgur.com/Mdw4wWr
http://imgur.com/96SCG2m
http://imgur.com/54Gz15g
http://imgur.com/lPYghMX
http://imgur.com/VFg3y1L
http://imgur.com/YawSFjA
http://imgur.com/fmL0KSr
http://imgur.com/FGjYkns
Eleven Sapphire RX 580's and two EVGA 1300W PSU's all mounted on one of our frames. 
It looks great. But there are two things:
1- They are tight. REALLY TIGHT ! What is the temp reading on these cards? Are they fine because I guess they are not.
2- I heard that getting more than 4 rx 5xx cards running is still an issue? How did you get it solved? Because apparently a lot of ppl need to know.
The motherboard is a Supermicro X9DRX+-F.
Client didn't answer my question about temps, only gave this info:
Hashtypes:
- MD5: 338.2 GH/s
- MD4: 574.7 GH/s
- SHA1: 126.2 GH/s
Note: 1 more GPU to be fitted and needs optimization.
What are your techniques for evacuating heat?
What kind of air extractor do you use?
What kind of air extractor do you use?
These look fantastic!
840W for Ethash? custom bios? downclocked?
840W for Ethash? custom bios? downclocked?
Yes, yes and yes
Share some details on the bios and clock settings?
Yes please always interested in these
Bios Strap : Custom Hynix Strap (search the forums for it)
Clocks/Volts : 1075/900
Mem/Volts : 1900/900
Total Eth hash : 193mh/s
Cases have cooling issues though, have ordered higher CFM Delta fans.
These look fantastic!
840W for Ethash? custom bios? downclocked?
840W for Ethash? custom bios? downclocked?
Yes, yes and yes
Share some details on the bios and clock settings?
Yes please always interested in these
These look fantastic!
840W for Ethash? custom bios? downclocked?
840W for Ethash? custom bios? downclocked?
Yes, yes and yes
Share some details on the bios and clock settings?
These look fantastic!
840W for Ethash? custom bios? downclocked?
840W for Ethash? custom bios? downclocked?
Yes, yes and yes
These look fantastic!
840W for Ethash? custom bios? downclocked?
840W for Ethash? custom bios? downclocked?
Allright, after a long process of prototyping and working with different materials, I finally have my own compact 7 card cases ready
Cold Rolled Carbon Steel 0.8mm with a 0.6mm thick sheet, all powder coated and heat treated, and I love them in Black.
Configuration as pictured above :
MSI Gaming 5 Z97 motherboards
Intel G3250 CPU
DDR 3 4GB Ram
64GB SSD
Corsair RM1000X PSu
and 7 X HIS RX470 4GB cards
Now ill admit, HIS aren't the best cards out there, but the Blue LED's on them go well with the Red's on my MSI motherboards.
Also unlike Sapphire which has all kinds of different memory complicating things, all HIS cards are Hynix only.
Cold Rolled Carbon Steel 0.8mm with a 0.6mm thick sheet, all powder coated and heat treated, and I love them in Black.
Configuration as pictured above :
MSI Gaming 5 Z97 motherboards
Intel G3250 CPU
DDR 3 4GB Ram
64GB SSD
Corsair RM1000X PSu
and 7 X HIS RX470 4GB cards
Now ill admit, HIS aren't the best cards out there, but the Blue LED's on them go well with the Red's on my MSI motherboards.
Also unlike Sapphire which has all kinds of different memory complicating things, all HIS cards are Hynix only.
7 rx 470 4gb woth 1000power supply are you seriously ?
840W from the wall, so, yeah. I also run 8 x GTX 1060 off of one 1000W PSU. Underclock and Undervolt and you can too.
Allright, after a long process of prototyping and working with different materials, I finally have my own compact 7 card cases ready
Cold Rolled Carbon Steel 0.8mm with a 0.6mm thick sheet, all powder coated and heat treated, and I love them in Black.
Configuration as pictured above :
MSI Gaming 5 Z97 motherboards
Intel G3250 CPU
DDR 3 4GB Ram
64GB SSD
Corsair RM1000X PSu
and 7 X HIS RX470 4GB cards
Now ill admit, HIS aren't the best cards out there, but the Blue LED's on them go well with the Red's on my MSI motherboards.
Also unlike Sapphire which has all kinds of different memory complicating things, all HIS cards are Hynix only.
Cold Rolled Carbon Steel 0.8mm with a 0.6mm thick sheet, all powder coated and heat treated, and I love them in Black.
Configuration as pictured above :
MSI Gaming 5 Z97 motherboards
Intel G3250 CPU
DDR 3 4GB Ram
64GB SSD
Corsair RM1000X PSu
and 7 X HIS RX470 4GB cards
Now ill admit, HIS aren't the best cards out there, but the Blue LED's on them go well with the Red's on my MSI motherboards.
Also unlike Sapphire which has all kinds of different memory complicating things, all HIS cards are Hynix only.
7 rx 470 4gb woth 1000power supply are you seriously ?
Allright, after a long process of prototyping and working with different materials, I finally have my own compact 7 card cases ready
Cold Rolled Carbon Steel 0.8mm with a 0.6mm thick sheet, all powder coated and heat treated, and I love them in Black.
Configuration as pictured above :
MSI Gaming 5 Z97 motherboards
Intel G3250 CPU
DDR 3 4GB Ram
64GB SSD
Corsair RM1000X PSu
and 7 X HIS RX470 4GB cards
Now ill admit, HIS aren't the best cards out there, but the Blue LED's on them go well with the Red's on my MSI motherboards.
Also unlike Sapphire which has all kinds of different memory complicating things, all HIS cards are Hynix only.
Cold Rolled Carbon Steel 0.8mm with a 0.6mm thick sheet, all powder coated and heat treated, and I love them in Black.
Configuration as pictured above :
MSI Gaming 5 Z97 motherboards
Intel G3250 CPU
DDR 3 4GB Ram
64GB SSD
Corsair RM1000X PSu
and 7 X HIS RX470 4GB cards
Now ill admit, HIS aren't the best cards out there, but the Blue LED's on them go well with the Red's on my MSI motherboards.
Also unlike Sapphire which has all kinds of different memory complicating things, all HIS cards are Hynix only.
Eleven Sapphire RX 580's and two EVGA 1300W PSU's all mounted on one of our frames.
It looks great. But there are two things:
1- They are tight. REALLY TIGHT ! What is the temp reading on these cards? Are they fine because I guess they are not.
2- I heard that getting more than 4 rx 5xx cards running is still an issue? How did you get it solved? Because apparently a lot of ppl need to know.
My work in progress
So i got bored. bought some very old used Chieftec Biiig Towers..i think i will continue rebuilding all my rigs.
Used 5x Arctic F12 Fans. Cut out 4 holes. 3 fans for output and 2 fans for air input.
6 x RX 470 4GB @165 MH ETH and @68-75 degrees celsius @35% Fan speed...i think it is a decent result. the whole rig isnt very loud
and thanks to the developer of cable binder
Used 5x Arctic F12 Fans. Cut out 4 holes. 3 fans for output and 2 fans for air input.
6 x RX 470 4GB @165 MH ETH and @68-75 degrees celsius @35% Fan speed...i think it is a decent result. the whole rig isnt very loud
and thanks to the developer of cable binder
Eleven Sapphire RX 580's and two EVGA 1300W PSU's all mounted on one of our frames.
HP CS server psu
not a fan of messy wiring . . .
not really a mining rigs manufacturer but i do custom build for my customers, atm only local market.
not really a mining rigs manufacturer but i do custom build for my customers, atm only local market.
Which Psu do you use?
not a fan of messy wiring . . .
not really a mining rigs manufacturer but i do custom build for my customers, atm only local market.
Not the first time I tell this, but you have one of the sexiest gpu rigs. Keep improving (not sure if it is possible) and sharing with the community. not really a mining rigs manufacturer but i do custom build for my customers, atm only local market.
much thx
yes there are rooms for improvements & newer revisions are being worked on as i type.
Jump to: