Author

Topic: [GPUC] GPU Coin | Mandatory Wallet Update - page 270. (Read 421421 times)

full member
Activity: 210
Merit: 100
<@cryptowest> problem is... i give wallets to trusted people to hand out to you guys, and they start using them
[09:54] <@cryptowest> so i have to reset the fucking blockchain again


post wallets on the website and launch already, it aint that hard.
hero member
Activity: 616
Merit: 500
<@cryptowest> problem is... i give wallets to trusted people to hand out to you guys, and they start using them
[09:54] <@cryptowest> so i have to reset the fucking blockchain again


Sounds like they need better friends.
sr. member
Activity: 434
Merit: 250
TAKEN.
YOU have taken my family for the evening,
You have taken my entire night for doing what I need to do.
You have taken my sleep so I will perform badly at work .
Well I suggest you launch now, or re-schedule for 20 hrs from now.
AND if YOU DON'T. WELL, I have a very special set of skills for dealing
with people like you. YOU HAVE TAKEN TOO MUCH FROM ME.

That is why you should not mine their coin or waste another moment of your life dealing with them at all.
member
Activity: 84
Merit: 10
<@cryptowest> OK
<@cryptowest> JUST WATING FOR THE MODEM TO CONNECT WITH AOL




hahahaha Grin
newbie
Activity: 49
Merit: 0
<@cryptowest> problem is... i give wallets to trusted people to hand out to you guys, and they start using them
[09:54] <@cryptowest> so i have to reset the fucking blockchain again
sr. member
Activity: 308
Merit: 250
POOL
POOLS PLEASE POST IF YOU WILL BE IN AND RUNNING AT 1:30 FOR RE-LAUNCH
SUPRNOVA?
ULTRA?
OAK?
HASHFEVER?

PLEASE RESPOND

In the IRC UltraPool, and DedicatedPool have already confirmed they will be part of the next launch. Others I do not know of yet.

http://GPU.LeetPools.com will be mining at launch

gonna stick with these guys, for what its worth, im IPO of about 1mil, so im just gonna follow this coin until it either finally takes off or just dies due to lack of skills to launch a coin.

Im with you, ill be getting this coin one way or another with the IPO, might as well stay up and try to mine a bit too!  3rd time is a charm!
if this last launch fails im just tossing the table and going to bed, wasted enough time waiting on devs to pull their heads outta their ass'

True that.
member
Activity: 70
Merit: 10
<@cryptowest> OK
<@cryptowest> JUST WATING FOR THE MODEM TO CONNECT WITH AOL



MODEM!? WTF !??

when i hear modem i think of a 33k6 Smiley
M31
full member
Activity: 139
Merit: 100
<@cryptowest> OK
<@cryptowest> JUST WATING FOR THE MODEM TO CONNECT WITH AOL



It's getting late here, so I'm going through a pre-sleep phase of easily-amused.  That was rather hilarious!

To the devs: thanks for hanging in there and making sure this coin works shortly!

full member
Activity: 229
Merit: 100
Hi guys been up all night myself and am rather tired.  I have already mined on pools and lost out on those coins on two occasions now myself due to the forks and hope this next attempt will be third time lucky.

I have decided to look at solo mining as I have always used pools until now.  I have made a bat file with this in it "cgminer.exe --scrypt -o 127.0.0.1:3344 -u username -p password -I 13 -w 256 -g 2 --gpu-reorder --thread-concurrency 8192 --gpu-engine 1060 --gpu-memclock 1500 --gpu-powertune 0 --temp-target 80 --auto-fan" That has been put with all my other bat files in the cgminer/vertminer folder.
Should that bat just be "cgminer.exe --scrypt -o 127.0.0.1:3344 -u username -p password" or are the other settings not a issue, or is that even right?

I have also made a .CONF file that is called gpucoin.CONF and that should be put in the appdata/roaming folder with the dat file I gather.

rpcuser=username
rpcpassword=password
server=1
daemon=1
addnode=70.161.219.122
addnode=91.125.248.210
addnode=69.8.51.75:6858
addnode=81.229.246.124:6858
addnode=99.28.127.102:64132
addnode=85.214.95.230:6858
gen=0
listen=0
port=3344
rpcport=3344
rpcallowip=*
rpcallowip=localhost

Is this correct?

Then if i get this right i just start the bat while the wallet is running and i should receive payments?

Any help is appreciated, thanks in advance.

YOu have specified rpcallowip=*
rpcallowip=localhost
twice.
Leave just 127.0.0.1
Settings in bat file are OK, of course, if you not speicfy them, it will take them from the config.
However, pool settings (in your case, solo), MUST be set from the bat file, not the config.
And dont forget to start the wallet as a server first. (command line, path to wallet, and add to this -server).

I assumed you needed the port number after the 127.0.0.1 guess i was wrong .  I also assumed the server=1 line was for turning the wallet into the server.  so much to learn it would seem.  Thanks I'll try to get it working.

SOrry,I made a mistake, you need:
listen=1
daemon=1
server=1
gen=0
in config


Now how to point multiple rigs to that ? Separating rpcallowip values with comas does not seem to work...
Just put each wallet per rig on the rig itself...


Too many rigs, would take me at least an hour to set it all up Undecided
sr. member
Activity: 434
Merit: 250
lolz, what the fuck are you guys doing here???

making some money Cheesy





_______________________________________________________________________________ ________________________________________________
Don't miss any coin release at altCoinCalendar.info

No, that is what the dev's have already done...where is the stack gif when you need it
newbie
Activity: 42
Merit: 0
<@cryptowest> OK
<@cryptowest> JUST WATING FOR THE MODEM TO CONNECT WITH AOL



MODEM!? WTF !??

You don't get sarcasm do you?
hero member
Activity: 616
Merit: 500
<@cryptowest> OK
<@cryptowest> JUST WATING FOR THE MODEM TO CONNECT WITH AOL



MODEM!? WTF !??

There's your sign. You can't make this up. It's either assfoolery, or they're purposefully deceiving you guys.
newbie
Activity: 59
Merit: 0
<@cryptowest> OK
<@cryptowest> JUST WATING FOR THE MODEM TO CONNECT WITH AOL



MODEM!? WTF !??

Yeh, the dial-up can be frisky sometimes.
sr. member
Activity: 434
Merit: 250
source is posted
sourcd has been there since last failed launch




_______________________________________________________________________________ _________________________________
Next Coin Lite - Fair Distribution

Mine the genesis and bring it to me..mwwaahhahahah
legendary
Activity: 1568
Merit: 1000
Twitter @Acimirov
<@cryptowest> OK
<@cryptowest> JUST WATING FOR THE MODEM TO CONNECT WITH AOL



MODEM!? WTF !??
sr. member
Activity: 392
Merit: 265
Hi guys been up all night myself and am rather tired.  I have already mined on pools and lost out on those coins on two occasions now myself due to the forks and hope this next attempt will be third time lucky.

I have decided to look at solo mining as I have always used pools until now.  I have made a bat file with this in it "cgminer.exe --scrypt -o 127.0.0.1:3344 -u username -p password -I 13 -w 256 -g 2 --gpu-reorder --thread-concurrency 8192 --gpu-engine 1060 --gpu-memclock 1500 --gpu-powertune 0 --temp-target 80 --auto-fan" That has been put with all my other bat files in the cgminer/vertminer folder.
Should that bat just be "cgminer.exe --scrypt -o 127.0.0.1:3344 -u username -p password" or are the other settings not a issue, or is that even right?

I have also made a .CONF file that is called gpucoin.CONF and that should be put in the appdata/roaming folder with the dat file I gather.

rpcuser=username
rpcpassword=password
server=1
daemon=1
addnode=70.161.219.122
addnode=91.125.248.210
addnode=69.8.51.75:6858
addnode=81.229.246.124:6858
addnode=99.28.127.102:64132
addnode=85.214.95.230:6858
gen=0
listen=0
port=3344
rpcport=3344
rpcallowip=*
rpcallowip=localhost

Is this correct?

Then if i get this right i just start the bat while the wallet is running and i should receive payments?

Any help is appreciated, thanks in advance.

YOu have specified rpcallowip=*
rpcallowip=localhost
twice.
Leave just 127.0.0.1
Settings in bat file are OK, of course, if you not speicfy them, it will take them from the config.
However, pool settings (in your case, solo), MUST be set from the bat file, not the config.
And dont forget to start the wallet as a server first. (command line, path to wallet, and add to this -server).

I assumed you needed the port number after the 127.0.0.1 guess i was wrong .  I also assumed the server=1 line was for turning the wallet into the server.  so much to learn it would seem.  Thanks I'll try to get it working.

SOrry,I made a mistake, you need:
listen=1
daemon=1
server=1
gen=0
in config


Now how to point multiple rigs to that ? Separating rpcallowip values with comas does not seem to work...
Just put each wallet per rig on the rig itself...
full member
Activity: 210
Merit: 100
TAKEN.
YOU have taken my family for the evening,
You have taken my entire night for doing what I need to do.
You have taken my sleep so I will perform badly at work .
Well I suggest you launch now, or re-schedule for 20 hrs from now.
AND if YOU DON'T. WELL, I have a very special set of skills for dealing
with people like you. YOU HAVE TAKEN TOO MUCH FROM ME.

thats your own fault for wasting your time... lol I have actually accomplished a good amount while waiting for this launch.
sr. member
Activity: 386
Merit: 250
newbie
Activity: 34
Merit: 0
<@cryptowest> OK
<@cryptowest> JUST WATING FOR THE MODEM TO CONNECT WITH AOL

full member
Activity: 154
Merit: 100
Jump to: