GeForce GTX 1060 6 GB OC Provide 295 Hash/s algorithm of Equihash at Coreclock 1683 MHz and Memoryclock 4252 MHz while consuming 75 Power(watts).
https://miningchamp.com/gpus/270/Asus-GeForce-GTX-1060-6-GB-OC-hashrate
more about Graphics card Hashrate You can find On
https://miningchamp.com/
Topic: GTX 1060 LOW HASH RATE please (Read 4515 times)
why is everyone mining eth what a waste of hash, must be a whattomine thing there are way more profitable coins to mine with nvidia card atm
I'm using the latest Nvidia drivers for windows 8.1 and it doesn't work for me. Does Windows 8 work? Someone tried it?
Hmm, you all make my Asus 1060 OC3G with micron (I suspect) memory which I payed less than €3K for (at the highest boom) as a steal.
9 of them average at 210MH/s ethash (claymore on simplemining.net, and memory dialed back a little from max, never tested plain values).
3GB is enough on Linux for etherium until it goes PoS, then do something else.
How I managed to get 10 (one died after a month) with the same memory form 5 different suppliers is a mystery.
9 of them average at 210MH/s ethash (claymore on simplemining.net, and memory dialed back a little from max, never tested plain values).
3GB is enough on Linux for etherium until it goes PoS, then do something else.
How I managed to get 10 (one died after a month) with the same memory form 5 different suppliers is a mystery.
I am using GTX 1060 EVGA ssc 6GB with dstm zcash miner and overclocked
Got below results is it good
Any one have any suggestions
GPU0 58C 73% | 318.4 Sol/s 326.7 Avg 175.0 I/s | 2.72 S/W 118 W | 0.76 99.3 179
GPU1 48C 73% | 342.5 Sol/s 337.9 Avg 181.0 I/s | 2.83 S/W 117 W | 0.79 99.6 189
GPU2 57C 73% | 335.6 Sol/s 335.1 Avg 179.5 I/s | 2.81 S/W 117 W | 0.75 99.7 176
============== | 996.5 Sol/s 999.6 Avg 535.4 I/s | 2.79 S/W 353 W | 2.31 99.5 181
Got below results is it good
Any one have any suggestions
GPU0 58C 73% | 318.4 Sol/s 326.7 Avg 175.0 I/s | 2.72 S/W 118 W | 0.76 99.3 179
GPU1 48C 73% | 342.5 Sol/s 337.9 Avg 181.0 I/s | 2.83 S/W 117 W | 0.79 99.6 189
GPU2 57C 73% | 335.6 Sol/s 335.1 Avg 179.5 I/s | 2.81 S/W 117 W | 0.75 99.7 176
============== | 996.5 Sol/s 999.6 Avg 535.4 I/s | 2.79 S/W 353 W | 2.31 99.5 181
Those look good to me. I have a EVGA GTX 1060 6 Gig with Micro memory and I get about 295 Sols. Looks like your SSC card is killing it.
I am using GTX 1060 EVGA ssc 6GB with dstm zcash miner and overclocked
Got below results is it good
Any one have any suggestions
GPU0 58C 73% | 318.4 Sol/s 326.7 Avg 175.0 I/s | 2.72 S/W 118 W | 0.76 99.3 179
GPU1 48C 73% | 342.5 Sol/s 337.9 Avg 181.0 I/s | 2.83 S/W 117 W | 0.79 99.6 189
GPU2 57C 73% | 335.6 Sol/s 335.1 Avg 179.5 I/s | 2.81 S/W 117 W | 0.75 99.7 176
============== | 996.5 Sol/s 999.6 Avg 535.4 I/s | 2.79 S/W 353 W | 2.31 99.5 181
Got below results is it good
Any one have any suggestions
GPU0 58C 73% | 318.4 Sol/s 326.7 Avg 175.0 I/s | 2.72 S/W 118 W | 0.76 99.3 179
GPU1 48C 73% | 342.5 Sol/s 337.9 Avg 181.0 I/s | 2.83 S/W 117 W | 0.79 99.6 189
GPU2 57C 73% | 335.6 Sol/s 335.1 Avg 179.5 I/s | 2.81 S/W 117 W | 0.75 99.7 176
============== | 996.5 Sol/s 999.6 Avg 535.4 I/s | 2.79 S/W 353 W | 2.31 99.5 181
I am also looking or a solution for my Palit GTX1060 card which has Hynix memory too.
Instead, I let it mine with zcash as it can reach 320 sol/s EWBF zcash miner.
I can only manage to get 19.x MHs if overclocked at +490 - +500.
Instead, I let it mine with zcash as it can reach 320 sol/s EWBF zcash miner.
I can only manage to get 19.x MHs if overclocked at +490 - +500.
I got x6 1060 6GB Palit recently. All with samsung memory.
x4 cards with 86.06.45.00.23 vbios version and
x2 cards with 86.06.39.00.12 vbios version.
86.06.39.00.12 shows 20 MH/s in stock, but
86.06.45.00.23 only 15 MH/s in stock.
Im going to flash all cards to 86.06.39.00.12
Looks like there is nothing wrong with bios version. Just find out that x4 my cards with hynix memory. And that is why it shows only 15 MH/s in stock. Damn hynix...
So you have tried flash 86.06.39.00.12 to your Hynix card and still return the same 15MHS result?
I am also looking or a solution for my Palit GTX1060 card which has Hynix memory too.
Instead, I let it mine with zcash as it can reach 320 sol/s EWBF zcash miner.
I can only manage to get 19.x MHs if overclocked at +490 - +500.
Instead, I let it mine with zcash as it can reach 320 sol/s EWBF zcash miner.
I can only manage to get 19.x MHs if overclocked at +490 - +500.
I got x6 1060 6GB Palit recently. All with samsung memory.
x4 cards with 86.06.45.00.23 vbios version and
x2 cards with 86.06.39.00.12 vbios version.
86.06.39.00.12 shows 20 MH/s in stock, but
86.06.45.00.23 only 15 MH/s in stock.
Im going to flash all cards to 86.06.39.00.12
Looks like there is nothing wrong with bios version. Just find out that x4 my cards with hynix memory. And that is why it shows only 15 MH/s in stock. Damn hynix...
I am also looking or a solution for my Palit GTX1060 card which has Hynix memory too.
Instead, I let it mine with zcash as it can reach 320 sol/s EWBF zcash miner.
I can only manage to get 19.x MHs if overclocked at +490 - +500.
Instead, I let it mine with zcash as it can reach 320 sol/s EWBF zcash miner.
I can only manage to get 19.x MHs if overclocked at +490 - +500.
I got x6 1060 6GB Palit recently. All with samsung memory.
x4 cards with 86.06.45.00.23 vbios version and
x2 cards with 86.06.39.00.12 vbios version.
86.06.39.00.12 shows 20 MH/s in stock, but
86.06.45.00.23 only 15 MH/s in stock.
Im going to flash all cards to 86.06.39.00.12
I am also looking or a solution for my Palit GTX1060 card which has Hynix memory too.
Instead, I let it mine with zcash as it can reach 320 sol/s EWBF zcash miner.
I can only manage to get 19.x MHs if overclocked at +490 - +500.
Instead, I let it mine with zcash as it can reach 320 sol/s EWBF zcash miner.
I can only manage to get 19.x MHs if overclocked at +490 - +500.
heve some MSI GEFORCE GTX 1060 ARMOR 3G OCV1
on samsung memory i get 25 mhs @ +920 dram -50 core 60% Pl
same card but Hynix getting 20 mhs @ same settings
on samsung memory i get 25 mhs @ +920 dram -50 core 60% Pl
same card but Hynix getting 20 mhs @ same settings
Hi guys, any solution here?
I have a zotac 1060 with samsung/hynix/micron memory and 86.06.45.00.c3 bios
cannot get it to run more than 19.7 mhs
Much appreciated!
I have a zotac 1060 with samsung/hynix/micron memory and 86.06.45.00.c3 bios
cannot get it to run more than 19.7 mhs
Much appreciated!
Yeah but u have Samsung on Micron memory type.
I'm getting about 22.5 MH/s per 1060 @ only 60% TDP.
I have OCed them to 17,8 MHs but its realy stupid felling when you know the gtx 1060 default is 19.
Hello
Got my first two rigs :
Mobo : Asus strix H270F
GPU : GEFORCE GTX 1060 6GB OC
RAM : 8GB
HDD : 120GB SSD
PSU : 850w
CPU : intel
I am getting funny results using last Claymore miner on Windows 10 fully updated, newest drivers. Getting 14,7 - 15,2 i even get 13 Mh/s sometimes.
Iv tried with Windows 7 64bit with full updates and same results.
Tried with 1, 2 ,3, 4 GPUS no success.
I dont want to OC them yet, because they should do 19MH/s.
Can you guys help please
Benjamin
Got my first two rigs :
Mobo : Asus strix H270F
GPU : GEFORCE GTX 1060 6GB OC
RAM : 8GB
HDD : 120GB SSD
PSU : 850w
CPU : intel
I am getting funny results using last Claymore miner on Windows 10 fully updated, newest drivers. Getting 14,7 - 15,2 i even get 13 Mh/s sometimes.
Iv tried with Windows 7 64bit with full updates and same results.
Tried with 1, 2 ,3, 4 GPUS no success.
I dont want to OC them yet, because they should do 19MH/s.
Can you guys help please
Benjamin
I shall sell the video cards and buy 1070 instead of 1060. You can get 27 Mhs for 1070 gtx. Getting more you can only overclock you geforce 1060.
Hello
Got my first two rigs :
Mobo : Asus strix H270F
GPU : GEFORCE GTX 1060 6GB OC
RAM : 8GB
HDD : 120GB SSD
PSU : 850w
CPU : intel
I am getting funny results using last Claymore miner on Windows 10 fully updated, newest drivers. Getting 14,7 - 15,2 i even get 13 Mh/s sometimes.
Iv tried with Windows 7 64bit with full updates and same results.
Tried with 1, 2 ,3, 4 GPUS no success.
I dont want to OC them yet, because they should do 19MH/s.
Can you guys help please
Benjamin
Got my first two rigs :
Mobo : Asus strix H270F
GPU : GEFORCE GTX 1060 6GB OC
RAM : 8GB
HDD : 120GB SSD
PSU : 850w
CPU : intel
I am getting funny results using last Claymore miner on Windows 10 fully updated, newest drivers. Getting 14,7 - 15,2 i even get 13 Mh/s sometimes.
Iv tried with Windows 7 64bit with full updates and same results.
Tried with 1, 2 ,3, 4 GPUS no success.
I dont want to OC them yet, because they should do 19MH/s.
Can you guys help please
Benjamin
Use ethminer optimized for 1060, recent updates ethminer is pushing 1060 to 29Mh/s for some. Claymore is not good
Just tried, same result....thanx anyway man 
I had the same problem until I figured out to set priority realtime to EthDcrMiner64.exe in task manager.
Hope it helps.
Hope it helps.
Tried with ethminer same Hashrate as on Claymore.
And another question. In 14 dazy i will get 12 Asus Strix 6gb OC...is it even worth to pay 4k euros for this, couse of the difficulty and RIO time ? Im sory but im lookin for a solution about this hynix memorz for over a week.
And another question. In 14 dazy i will get 12 Asus Strix 6gb OC...is it even worth to pay 4k euros for this, couse of the difficulty and RIO time ? Im sory but im lookin for a solution about this hynix memorz for over a week.
Jump to: