Hashrate 490 Hash/s
Algorithm Equihash
Manufacturer Gigabyte
Power Consumption 130
Core Clock 2012 MHz
Memory Clock -
OS Windows 10
Driver Version 384.73
Description
The Gigabyte Geforce GTX 1070 G1 provides hashrate of 490 Hash/s for Equihash at Coreclock 2012 MHz while consuming 130 watts.
Gpu Specs
The Nvidia Geforce GTX 1070 G1 is a graphics card by Nvidia. It comes with GDDR5 memory and has 256 bit memory interface or bus width.
Inside Geforce GTX 1070 G1 there is a GP104 graphics processor chip which has 1920 shaders. The base operating core clock speed of Geforce GTX 1070 G1 is 1506 MHz and memory clock speed is 2002 MHz.
For rendering purpose it comes with 64 render output unit's and 120 texture mapping unit's.
here is the link for more info
https://miningchamp.com/gpus/77/Gigabyte-Geforce-GTX-1070-G1-hashrate
Topic: GTX 1070 G1 try to get 430-460 Sol/s (Read 1056 times)
Hello.
Just my five cents:
I have 1 rig with 8x1070 Gygabite G1 8Mb.
I use W10 and Afterburner.
Settings are:
+100 core
+700 mem
TDP: 70%
Fan: AUTO
+- 30m/h ETH
+-450 equihash
Temps all around 65º
Just my five cents:
I have 1 rig with 8x1070 Gygabite G1 8Mb.
I use W10 and Afterburner.
Settings are:
+100 core
+700 mem
TDP: 70%
Fan: AUTO
+- 30m/h ETH
+-450 equihash
Temps all around 65º
Hello all
i try to switch from ETH Mining to Zcash Mining but have problem with the OC
i have some GTX 1070's
running on ewbf-0.3.4b / simple mining / linux
i put OC
Core Empty, Memory +500, Power limit : 120 watt
i get 420 Sol/s but my GTX 1070's are getting very very hot about 80 C
i am lost
does somebody have an OC stable with GTX 1070's under 70 C ?
thank you all for your help sincerely.
i try to switch from ETH Mining to Zcash Mining but have problem with the OC
i have some GTX 1070's
running on ewbf-0.3.4b / simple mining / linux
i put OC
Core Empty, Memory +500, Power limit : 120 watt
i get 420 Sol/s but my GTX 1070's are getting very very hot about 80 C
i am lost
does somebody have an OC stable with GTX 1070's under 70 C ?
thank you all for your help sincerely.
tdp 77, core_delta 120, memory_delta 680 :
Miner - Excavator
Hello all
i try to switch from ETH Mining to Zcash Mining but have problem with the OC
i have some GTX 1070's
running on ewbf-0.3.4b / simple mining / linux
i put OC
Core Empty, Memory +500, Power limit : 120 watt
i get 420 Sol/s but my GTX 1070's are getting very very hot about 80 C
i am lost
does somebody have an OC stable with GTX 1070's under 70 C ?
thank you all for your help sincerely.
Regular 1080 is not good at all for mining Eth, hash rate = 18~20i try to switch from ETH Mining to Zcash Mining but have problem with the OC
i have some GTX 1070's
running on ewbf-0.3.4b / simple mining / linux
i put OC
Core Empty, Memory +500, Power limit : 120 watt
i get 420 Sol/s but my GTX 1070's are getting very very hot about 80 C
i am lost
does somebody have an OC stable with GTX 1070's under 70 C ?
thank you all for your help sincerely.
1070 is ok for both, 28~31 Eth, 430~460 Zec
1080Ti is another story, 31 Eth (even when TDP is set all the way down to -50%) and 712/Sol Zec stock.
The above reading are based on my cards.
dont put your vga close to wall put in room with air flow , if you use 4++ vga buy some extra fan
i use 6x 1070 strix oc 8gb
core default
memory default
power limit 90%
Target Temperature ℃: link with power limit
fan speed lock 50%
average temp 58-65 max, hash rate 431-450
i use 6x 1070 strix oc 8gb
core default
memory default
power limit 90%
Target Temperature ℃: link with power limit
fan speed lock 50%
average temp 58-65 max, hash rate 431-450
is it bad if my RIG restart every 20 minutes ?
Best regards
Best regards
I got the same problem before. Then I tried to reduce OC and added the 2nd RAM with 4GB, and now it works perfectly.
is it bad if my RIG restart every 20 minutes ?
Best regards
Best regards
Why is it restarting? Normally my rigs run for days or even weeks without any issues.
is it bad if my RIG restart every 20 minutes ?
Best regards
Best regards
around 74 degrees when i mine ETH and yes fan works i think it might be the location where they are because it is getting hot in here.
That can have quite a bit of effect on card temps.
Also, how much SPACE do you have between the cards - if it is less than 1 inch it isn't NEARLY enough for proper cooling, really need 2-3 inches for good cooling.
You still haven't mentioned what you have your fans SET at - if you are using the "standard factory" settings, that IS your issue and you need to bump your fan speeds up.
GTX 1070 has TDP is 150W
That varies.
Many are 151 watts (not 150), like the FE and Gigabyte "ITX" and MSI "Aero mini" and EVGA SC (specific examples I have), some are 180 like the Gigabtye Windforce (both 2 AND 3 fan models), at least one MSI model is 240.
"Optimal settings" also vary as the DEFAULT clock on cards varies widely, the default MEMORY clock varies some, and various brands of memory tend to have differing ability to overclock.
"Optimal settings" should be specified as being for a specific card model - and there is enough variation even THERE that sometimes the optimal settings for ONE specific card will be "can't handle this, crashing all the time" on another card of the SAME model.
"Simple Mining" is a LINUX based distribution, Linux controls for TDP for NVidia are in watts not a percentage - which IMO is a LOT more sensible.
does somebody have an idea ?
because on simple mining power limit is in watt and not %
core empty
memory +500
power limit ( in watt ) :120
Target Temperature ℃:
73
Minimum Fan speed %:
70
i get around 433 sol/s per card
but IT IS GOING AROUND 82 TEMP...82 DEGREES.
what do you guys think
because on simple mining power limit is in watt and not %
core empty
memory +500
power limit ( in watt ) :120
Target Temperature ℃:
73
Minimum Fan speed %:
70
i get around 433 sol/s per card
but IT IS GOING AROUND 82 TEMP...82 DEGREES.
what do you guys think
You said that you previously mined Ethash algo. What temperatures did you have then? And if your GTX1070 model is Gigabyte G1 80 degrees is too hot. It seems the issue with cooling system. Do the fans works properly? Check them
around 74 degrees when i mine ETH and yes fan works i think it might be the location where they are because it is getting hot in here.
i have put a plastic HUT outside my house with a fan that take the outside fresh air and put it inside and a fan that take the HUT air outside.
does somebody have an idea ?
because on simple mining power limit is in watt and not %
core empty
memory +500
power limit ( in watt ) :120
Target Temperature ℃:
73
Minimum Fan speed %:
70
i get around 433 sol/s per card
but IT IS GOING AROUND 82 TEMP...82 DEGREES.
what do you guys think
because on simple mining power limit is in watt and not %
core empty
memory +500
power limit ( in watt ) :120
Target Temperature ℃:
73
Minimum Fan speed %:
70
i get around 433 sol/s per card
but IT IS GOING AROUND 82 TEMP...82 DEGREES.
what do you guys think
You said that you previously mined Ethash algo. What temperatures did you have then? And if your GTX1070 model is Gigabyte G1 80 degrees is too hot. It seems the issue with cooling system. Do the fans works properly? Check them
around 74 degrees when i mine ETH and yes fan works i think it might be the location where they are because it is getting hot in here.
i have put a plastic HUT outside my house with a fan that take the outside fresh air and put it inside and a fan that take the HUT air outside.
i dont understand when you say power limit 80 % how much it is in watt ?
because on simple mining power limit is in watt and not %
anyway i give you the exact OC and you tell me where the problem is from
core empty
memory +500
power limit ( in watt ) :120
Target Temperature ℃:
75
Minimum Fan speed %:
70
what do you guys think
because on simple mining power limit is in watt and not %
anyway i give you the exact OC and you tell me where the problem is from
core empty
memory +500
power limit ( in watt ) :120
Target Temperature ℃:
75
Minimum Fan speed %:
70
what do you guys think
GTX 1070 has TDP is 150W, so yes 80% PL is 120W as same as your setting.
I tried many tests with 13 GPUs on SOS as well, optimum setting is: 120W, +120 Core, +100 Mem, 75 temp target, 70% Min Fan speed, average hashrate is 436 sol/s. I think it's not that high, but acceptable for me. When I did the same setting for 6-8 cards, average hashrate is about 445-448 sol/s.
does somebody have an idea ?
because on simple mining power limit is in watt and not %
core empty
memory +500
power limit ( in watt ) :120
Target Temperature ℃:
73
Minimum Fan speed %:
70
i get around 433 sol/s per card
but IT IS GOING AROUND 82 TEMP...82 DEGREES.
what do you guys think
because on simple mining power limit is in watt and not %
core empty
memory +500
power limit ( in watt ) :120
Target Temperature ℃:
73
Minimum Fan speed %:
70
i get around 433 sol/s per card
but IT IS GOING AROUND 82 TEMP...82 DEGREES.
what do you guys think
You said that you previously mined Ethash algo. What temperatures did you have then? And if your GTX1070 model is Gigabyte G1 80 degrees is too hot. It seems the issue with cooling system. Do the fans works properly? Check them
does somebody have an idea ?
because on simple mining power limit is in watt and not %
core empty
memory +500
power limit ( in watt ) :120
Target Temperature ℃:
73
Minimum Fan speed %:
70
i get around 433 sol/s per card
but IT IS GOING AROUND 82 TEMP...82 DEGREES.
what do you guys think
because on simple mining power limit is in watt and not %
core empty
memory +500
power limit ( in watt ) :120
Target Temperature ℃:
73
Minimum Fan speed %:
70
i get around 433 sol/s per card
but IT IS GOING AROUND 82 TEMP...82 DEGREES.
what do you guys think
i dont understand when you say power limit 80 % how much it is in watt ?
because on simple mining power limit is in watt and not %
anyway i give you the exact OC and you tell me where the problem is from
core empty
memory +500
power limit ( in watt ) :120
Target Temperature ℃:
75
Minimum Fan speed %:
70
what do you guys think
because on simple mining power limit is in watt and not %
anyway i give you the exact OC and you tell me where the problem is from
core empty
memory +500
power limit ( in watt ) :120
Target Temperature ℃:
75
Minimum Fan speed %:
70
what do you guys think
is you cooler in auto mode or it is force for some % like 60-70%?
try to set it for 100%, Pl to 80%, core +150 and memory + 400
usually 1070 can push with these setting around 460-480 sol/s, depends on chip and manufacturer
try to play with the settings. it is also possible that you card has some problem with radiator..
try to set it for 100%, Pl to 80%, core +150 and memory + 400
usually 1070 can push with these setting around 460-480 sol/s, depends on chip and manufacturer
try to play with the settings. it is also possible that you card has some problem with radiator..
ehmm you could do some custom watercooling on you'r video cards. That will might help with the temperature and you can may cramp some more power out of them too 
It's more useful to give your actual core&mem clock, than "+150", "+500". Because all videochips and default clocks on them are different, even on the same model of the same vendor
I find the G1 model of GB in general not that good. My windforce versions stay much cooler with similar output and settings. I think that the backplate which is supposed to look badass actually decreases the cooling capacity.
I do manage to keep the card under 70C with roughly 460 sol/s at a low PL anf high efficiency. Nevertheless I will avoid the card layout in the future.
I do manage to keep the card under 70C with roughly 460 sol/s at a low PL anf high efficiency. Nevertheless I will avoid the card layout in the future.
Jump to: