Hoping the collisions/min isn't too low for shares 
Topic: [Guide and Giveaway] Free $10 - Cloud Mining PTS with yPool and Digital Ocean - page 6. (Read 15211 times)
November 13, 2013, 07:09:51 PM
It still hasn't mined a share either Hoping the collisions/min isn't too low for shares
Hoping the collisions/min isn't too low for shares 
November 13, 2013, 07:07:22 PM
Yeah -- I just removed march=native in the g++ call and its fine, getting 50 collisions/min ish, dunno if it could be a bunch higher if it was 64-bit
Yup came to the same conclusion. Updating the autorun script now. November 13, 2013, 07:03:07 PM
Yeah -- I just removed march=native in the g++ call and its fine, getting 50 collisions/min ish, dunno if it could be a bunch higher if it was 64-bit
November 13, 2013, 07:01:40 PM
Just did this and dropped the $10 to try it out with your affiliate link, even though difficulty just went up 5x! Probably not still profitable, but we shall see.
Pv38QQwP5sVeZzmis4rjJSyxRQVPiZnYuw
Initial indications are that it is still fine. Will see in a few hours. If you did DO with the $10 credit, i will give you early access to the $200 free credit guide.Pv38QQwP5sVeZzmis4rjJSyxRQVPiZnYuw
Sweet
Digital Ocean doesn't boot you for stuff like this btw?
Edit: Actually I got the same error --
My droplet is Active 8GB Ram 80GB SSD Disk New York 2 Debian 7.0 x64
Resolving deltas: 100% (69/69), done.
g++ -O3 -march=native -c -o jhlib.o jhlib.cpp
jhlib.cpp:1:0: error: CPU you selected does not support x86-64 instruction set
make: *** [jhlib.o] Error 1
./mine.sh: line 8: ./jhProtominer: No such file or directory
November 13, 2013, 06:53:11 PM
Just did this and dropped the $10 to try it out with your affiliate link, even though difficulty just went up 5x! Probably not still profitable, but we shall see.
Pv38QQwP5sVeZzmis4rjJSyxRQVPiZnYuw
Initial indications are that it is still fine. Will see in a few hours. If you did DO with the $10 credit, i will give you early access to the $200 free credit guide.Pv38QQwP5sVeZzmis4rjJSyxRQVPiZnYuw
Sweet
Digital Ocean doesn't boot you for stuff like this btw?
Edit: Actually I got the same error --
My droplet is Active 8GB Ram 80GB SSD Disk New York 2 Debian 7.0 x64
Resolving deltas: 100% (69/69), done.
g++ -O3 -march=native -c -o jhlib.o jhlib.cpp
jhlib.cpp:1:0: error: CPU you selected does not support x86-64 instruction set
make: *** [jhlib.o] Error 1
./mine.sh: line 8: ./jhProtominer: No such file or directory
solved by removing the march=native flag in mine.sh g++ call
November 13, 2013, 06:51:04 PM
I edited the mine.sh and ran it but got "error CPU you selected does not support x86-64 instruction set on make"
What droplet are you running? Screenshot of putty would be helpful. November 13, 2013, 06:49:43 PM
Just did this and dropped the $10 to try it out with your affiliate link, even though difficulty just went up 5x! Probably not still profitable, but we shall see.
Pv38QQwP5sVeZzmis4rjJSyxRQVPiZnYuw
Initial indications are that it is still fine. Will see in a few hours. If you did DO with the $10 credit, i will give you early access to the $200 free credit guide. Pv38QQwP5sVeZzmis4rjJSyxRQVPiZnYuw
November 13, 2013, 06:44:43 PM
I edited the mine.sh and ran it but got "error CPU you selected does not support x86-64 instruction set on make"
November 13, 2013, 06:39:37 PM
Just did this and dropped the $10 to try it out with your affiliate link, even though difficulty just went up 5x! Probably not still profitable, but we shall see.
Pv38QQwP5sVeZzmis4rjJSyxRQVPiZnYuw
Pv38QQwP5sVeZzmis4rjJSyxRQVPiZnYuw
November 13, 2013, 06:18:43 PM
Id appriceate some pts coins, havent earned much with my i3 but ill look into the digi ocean and appreciate this guide, following it now
PrY4bWzwjBz7czjqW35QvrYz8wGvM3RXrk
PrY4bWzwjBz7czjqW35QvrYz8wGvM3RXrk
November 13, 2013, 06:11:47 PM
This guide is outdated. Please use http://protoshares.com/mining.html
If you would just like some coins post your address below.
My affiliate link is https://www.digitalocean.com/?refcode=b42d05f9603c, if you sign up with DO then tell me so I can give you 2x the giveaway coins and before the regular giveaway folks. Spend $10, and there will be a little bonus involved
.
Mining is currently... Profitable!
Try coupon: DIVEIN10
Instructions:
1. Sign Up for yPool.
2. Sign Up for Digital Ocean.
3. Fund you account with Paypal or Credit Card
4. Click the Green 'Create Button' or the Blue 'Create Droplet' Button
5. Select the 4 CPU / 8 GB, and Debian 7.0 x64 as your image
6. Your username and password will be emailed to you
7. Use an SSH client like Putty to login.
8. First we need to get a script to do the hard stuff for us.
9. Edit for your mining worker
10. Run it!
11. Launch as many as you would like. I would launch a few dozen before the difficult rises in a few hours.
12.
13. Profit
Some of the coins I mined:
Trades so far:
If you would just like some coins post your address below.
My affiliate link is https://www.digitalocean.com/?refcode=b42d05f9603c, if you sign up with DO then tell me so I can give you 2x the giveaway coins and before the regular giveaway folks. Spend $10, and there will be a little bonus involved
.Mining is currently... Profitable!
Try coupon: DIVEIN10
Instructions:
1. Sign Up for yPool.
2. Sign Up for Digital Ocean.
3. Fund you account with Paypal or Credit Card
4. Click the Green 'Create Button' or the Blue 'Create Droplet' Button
5. Select the 4 CPU / 8 GB, and Debian 7.0 x64 as your image
6. Your username and password will be emailed to you
7. Use an SSH client like Putty to login.
8. First we need to get a script to do the hard stuff for us.
Code:
wget protoshares.net/ypool.sh
Code:
./jhProtominer -o ypool.net -u [worker_name] -p [password] -m512
Code:
sh mine.sh
12.
13. Profit
Some of the coins I mined:
Trades so far:
Jump to: