Topic: [GUIDE] GridSeed 5-Chip USB, Blade & Black Miner Support/Tuning - page 38. (Read 308814 times)
April 28, 2014, 03:25:35 PM
I see the command lines of various mining setups and it just leaves me wondering...is there a way we could dump all the comm and speed assignments to a config file, or if the comm and speed assignments are omitted, have cpuminer search for the gridseeds and just run at the default speed that is indicated by --freq?
April 28, 2014, 03:02:49 PM
What im i missing in order to see more info?
April 28, 2014, 10:28:20 AM
i keep getting failed to open /dev/ttyACM0
I am running on Raspberry pi:
./minerd --gc3355=/dev/ttyACM0,/dev/ttyACM1,/dev/ttyACM2,/dev/ttyACM3,/dev/ttyACM4,/dev/ttyACM5,/dev/ttyACM6,/dev/ttyACM7 --freq=1000 --gc3355-autotune --url=stratum+tcp://usa-1.liteguardian.com:3335 --userpass=cxxx:x --retries=5
I am running on Raspberry pi:
./minerd --gc3355=/dev/ttyACM0,/dev/ttyACM1,/dev/ttyACM2,/dev/ttyACM3,/dev/ttyACM4,/dev/ttyACM5,/dev/ttyACM6,/dev/ttyACM7 --freq=1000 --gc3355-autotune --url=stratum+tcp://usa-1.liteguardian.com:3335 --userpass=cxxx:x --retries=5
I have the same problem ... I'm using Kernel ... 3.10.37+
I don't have any ttyACM0 in my dev folder ... got 9 Blades connected thru 2 x 10 port usb hubs ... working well with cgminer ...
Having exactly the same issue, am I forgetting something or is there a workaround?
IIRC cgminer uses a different driver than cpuminer/bfgminer. Try modprobe cdc_acm and see if that helps.
April 28, 2014, 10:22:27 AM
i keep getting failed to open /dev/ttyACM0
I am running on Raspberry pi:
./minerd --gc3355=/dev/ttyACM0,/dev/ttyACM1,/dev/ttyACM2,/dev/ttyACM3,/dev/ttyACM4,/dev/ttyACM5,/dev/ttyACM6,/dev/ttyACM7 --freq=1000 --gc3355-autotune --url=stratum+tcp://usa-1.liteguardian.com:3335 --userpass=cxxx:x --retries=5
I am running on Raspberry pi:
./minerd --gc3355=/dev/ttyACM0,/dev/ttyACM1,/dev/ttyACM2,/dev/ttyACM3,/dev/ttyACM4,/dev/ttyACM5,/dev/ttyACM6,/dev/ttyACM7 --freq=1000 --gc3355-autotune --url=stratum+tcp://usa-1.liteguardian.com:3335 --userpass=cxxx:x --retries=5
I have the same problem ... I'm using Kernel ... 3.10.37+
I don't have any ttyACM0 in my dev folder ... got 9 Blades connected thru 2 x 10 port usb hubs ... working well with cgminer ...
Having exactly the same issue, am I forgetting something or is there a workaround?
April 28, 2014, 08:32:53 AM
Code:
./minerd-gc3355 --freq=800 -G /dev/ttyACM0 --url=stratum+tcp://[yoururl]:[yourport] --userpass=[youruser].1:[yourpass]-t -A
[code]
[2014-04-28 13:30:26] 0: open device /dev/ttyACM0
[2014-04-28 13:30:26] 0: Open UART device /dev/ttyACM0
[2014-04-28 13:30:26] 0: Firmware version: 0x17031402
[2014-04-28 13:30:26] 0: GC3355 40-chip G-Blade Miner detected
[2014-04-28 13:30:26] 0@0: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@1: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@2: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@3: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@4: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@5: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@6: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@7: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@8: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@9: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@10: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@11: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@12: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@13: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@14: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@15: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@16: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@17: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@18: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@19: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@20: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@21: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@22: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@23: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@24: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@25: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@26: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@27: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@28: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@29: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@30: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@31: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@32: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@33: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@34: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@35: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@36: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@37: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@38: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@39: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] New job_id: 332d Diff: 256
[2014-04-28 13:30:26] Stratum detected new block
[2014-04-28 13:30:33] Accepted 800670a3 GSD 0@20
[2014-04-28 13:30:44] Accepted 4cdec5cd GSD 0@12
[2014-04-28 13:30:51] Accepted 334cc8ec GSD 0@8
[2014-04-28 13:30:57] New job_id: 332e Diff: 256
[2014-04-28 13:30:57] Accepted 6cebca3f GSD 0@17
[2014-04-28 13:30:58] Accepted e6679ec8 GSD 0@36
[2014-04-28 13:31:06] Accepted d9a256df GSD 0@34
[2014-04-28 13:31:17] Accepted e67ab188 GSD 0@36
[2014-04-28 13:31:20] Accepted 534a5c41 GSD 0@13
[2014-04-28 13:31:27] New job_id: 332f Diff: 256
[2014-04-28 13:31:27] Stratum detected new block
[2014-04-28 13:31:30] Accepted 33361f77 GSD 0@8
[2014-04-28 13:31:41] Accepted 8cdb5de9 GSD 0@22
[2014-04-28 13:31:41] Accepted e6756437 GSD 0@36
[2014-04-28 13:31:44] Accepted e011c810 GSD 0@35
[2014-04-28 13:31:55] New job_id: 3330 Diff: 256
[2014-04-28 13:31:55] Stratum detected new block
[2014-04-28 13:31:59] Accepted 8ccfe604 GSD 0@22
[2014-04-28 13:32:04] Accepted 133bb2a8 GSD 0@3
[2014-04-28 13:32:07] Accepted b33e5545 GSD 0@28
[2014-04-28 13:32:09] Accepted a00d761f GSD 0@25
[code]
[2014-04-28 13:30:26] 0: open device /dev/ttyACM0
[2014-04-28 13:30:26] 0: Open UART device /dev/ttyACM0
[2014-04-28 13:30:26] 0: Firmware version: 0x17031402
[2014-04-28 13:30:26] 0: GC3355 40-chip G-Blade Miner detected
[2014-04-28 13:30:26] 0@0: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@1: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@2: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@3: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@4: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@5: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@6: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@7: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@8: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@9: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@10: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@11: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@12: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@13: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@14: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@15: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@16: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@17: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@18: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@19: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@20: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@21: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@22: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@23: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@24: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@25: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@26: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@27: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@28: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@29: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@30: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@31: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@32: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@33: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@34: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@35: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@36: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@37: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@38: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] 0@39: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:30:26] New job_id: 332d Diff: 256
[2014-04-28 13:30:26] Stratum detected new block
[2014-04-28 13:30:33] Accepted 800670a3 GSD 0@20
[2014-04-28 13:30:44] Accepted 4cdec5cd GSD 0@12
[2014-04-28 13:30:51] Accepted 334cc8ec GSD 0@8
[2014-04-28 13:30:57] New job_id: 332e Diff: 256
[2014-04-28 13:30:57] Accepted 6cebca3f GSD 0@17
[2014-04-28 13:30:58] Accepted e6679ec8 GSD 0@36
[2014-04-28 13:31:06] Accepted d9a256df GSD 0@34
[2014-04-28 13:31:17] Accepted e67ab188 GSD 0@36
[2014-04-28 13:31:20] Accepted 534a5c41 GSD 0@13
[2014-04-28 13:31:27] New job_id: 332f Diff: 256
[2014-04-28 13:31:27] Stratum detected new block
[2014-04-28 13:31:30] Accepted 33361f77 GSD 0@8
[2014-04-28 13:31:41] Accepted 8cdb5de9 GSD 0@22
[2014-04-28 13:31:41] Accepted e6756437 GSD 0@36
[2014-04-28 13:31:44] Accepted e011c810 GSD 0@35
[2014-04-28 13:31:55] New job_id: 3330 Diff: 256
[2014-04-28 13:31:55] Stratum detected new block
[2014-04-28 13:31:59] Accepted 8ccfe604 GSD 0@22
[2014-04-28 13:32:04] Accepted 133bb2a8 GSD 0@3
[2014-04-28 13:32:07] Accepted b33e5545 GSD 0@28
[2014-04-28 13:32:09] Accepted a00d761f GSD 0@25
Code:
./minerd-gc3355 --freq=800 -G /dev/ttyACM0 --url=stratum+tcp://[yoururl]:[yourport] --userpass=[youruser].1:[yourpass]-t -A -D
[2014-04-28 13:34:57] 0: open device /dev/ttyACM0
[2014-04-28 13:34:57] 0: Open UART device /dev/ttyACM0
[2014-04-28 13:34:57] 0: Firmware version: 0x17031402
[2014-04-28 13:34:57] 0: GC3355 40-chip G-Blade Miner detected
[2014-04-28 13:34:58] 0@0: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@1: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@2: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@3: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@4: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@5: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@6: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@7: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@8: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@9: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@10: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@11: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@12: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@13: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@14: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@15: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@16: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@17: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@18: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@19: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@20: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@21: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@22: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@23: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@24: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@25: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@26: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@27: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@28: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@29: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@30: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] Failed to get Stratum session id
[2014-04-28 13:34:58] Stratum difficulty set to 256
[2014-04-28 13:34:58] 0@31: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@32: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@33: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@34: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@35: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@36: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@37: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@38: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@39: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] New job_id: 3333 Diff: 256
[2014-04-28 13:34:58] Stratum detected new block
[2014-04-28 13:34:58] Dispatching new work to GC3355 threads (0x5902ddc2)
[2014-04-28 13:34:59] 0@18 800MHz: Got nonce e32c3473, Hash <= Htarget! (0x5902ddc2)
[2014-04-28 13:34:59] Accepted 73342ce3 GSD 0@18
[2014-04-28 13:35:00] 0@21 800MHz: Got nonce 84a86786, Hash <= Htarget! (0x5902ddc2)
[2014-04-28 13:35:00] Accepted 8667a884 GSD 0@21
[2014-04-28 13:35:00] New job_id: 3334 Diff: 256
[2014-04-28 13:35:00] Stratum detected new block
[2014-04-28 13:35:00] Dispatching new work to GC3355 threads (0x5904b5a9)
[2014-04-28 13:35:07] 0@12 800MHz: Got nonce 60cad24c, Hash <= Htarget! (0x5904b5a9)
[2014-04-28 13:35:07] Accepted 4cd2ca60 GSD 0@12
[2014-04-28 13:35:09] 0@29 800MHz: Got nonce b309a2b9, Hash <= Htarget! (0x5904b5a9)
[2014-04-28 13:35:09] Accepted b9a209b3 GSD 0@29
[2014-04-28 13:35:13] 0@8 800MHz: Got nonce b3d13f33, Hash <= Htarget! (0x5904b5a9)
[2014-04-28 13:35:13] Accepted 333fd1b3 GSD 0@8
[2014-04-28 13:35:17] 0@16 800MHz: Got nonce d45e7766, Hash <= Htarget! (0x5904b5a9)
[2014-04-28 13:35:17] Accepted 66775ed4 GSD 0@16
[2014-04-28 13:35:29] New job_id: 3335 Diff: 256
[2014-04-28 13:35:29] Stratum detected new block
[2014-04-28 13:35:29] Dispatching new work to GC3355 threads (0x59214988)
[2014-04-28 13:35:34] 0@5 800MHz: Got nonce b0f50320, Hash <= Htarget! (0x59214988)
[2014-04-28 13:35:34] Accepted 2003f5b0 GSD 0@5
[2014-04-28 13:35:40] 0@2 800MHz: Got nonce 69d4d70c, Hash <= Htarget! (0x59214988)
[2014-04-28 13:35:41] Accepted 0cd7d469 GSD 0@2
[2014-04-28 13:35:48] 0@23 800MHz: Got nonce 1b384693, Hash <= Htarget! (0x59214988)
[2014-04-28 13:35:48] Accepted 9346381b GSD 0@23
[2014-04-28 13:35:52] 0@13 800MHz: Got nonce 49634a53, Hash <= Htarget! (0x59214988)
[2014-04-28 13:35:52] Accepted 534a6349 GSD 0@13
[2014-04-28 13:35:57] 0@22 800MHz: Got nonce 1c17e98c, Hash <= Htarget! (0x59214988)
[2014-04-28 13:35:57] Accepted 8ce9171c GSD 0@22
[/code] [2014-04-28 13:34:57] 0: open device /dev/ttyACM0
[2014-04-28 13:34:57] 0: Open UART device /dev/ttyACM0
[2014-04-28 13:34:57] 0: Firmware version: 0x17031402
[2014-04-28 13:34:57] 0: GC3355 40-chip G-Blade Miner detected
[2014-04-28 13:34:58] 0@0: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@1: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@2: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@3: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@4: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@5: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@6: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@7: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@8: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@9: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@10: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@11: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@12: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@13: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@14: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@15: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@16: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@17: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@18: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@19: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@20: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@21: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@22: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@23: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@24: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@25: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@26: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@27: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@28: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@29: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@30: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] Failed to get Stratum session id
[2014-04-28 13:34:58] Stratum difficulty set to 256
[2014-04-28 13:34:58] 0@31: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@32: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@33: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@34: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@35: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@36: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@37: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@38: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] 0@39: Set GC3355 core frequency to 800Mhz
[2014-04-28 13:34:58] New job_id: 3333 Diff: 256
[2014-04-28 13:34:58] Stratum detected new block
[2014-04-28 13:34:58] Dispatching new work to GC3355 threads (0x5902ddc2)
[2014-04-28 13:34:59] 0@18 800MHz: Got nonce e32c3473, Hash <= Htarget! (0x5902ddc2)
[2014-04-28 13:34:59] Accepted 73342ce3 GSD 0@18
[2014-04-28 13:35:00] 0@21 800MHz: Got nonce 84a86786, Hash <= Htarget! (0x5902ddc2)
[2014-04-28 13:35:00] Accepted 8667a884 GSD 0@21
[2014-04-28 13:35:00] New job_id: 3334 Diff: 256
[2014-04-28 13:35:00] Stratum detected new block
[2014-04-28 13:35:00] Dispatching new work to GC3355 threads (0x5904b5a9)
[2014-04-28 13:35:07] 0@12 800MHz: Got nonce 60cad24c, Hash <= Htarget! (0x5904b5a9)
[2014-04-28 13:35:07] Accepted 4cd2ca60 GSD 0@12
[2014-04-28 13:35:09] 0@29 800MHz: Got nonce b309a2b9, Hash <= Htarget! (0x5904b5a9)
[2014-04-28 13:35:09] Accepted b9a209b3 GSD 0@29
[2014-04-28 13:35:13] 0@8 800MHz: Got nonce b3d13f33, Hash <= Htarget! (0x5904b5a9)
[2014-04-28 13:35:13] Accepted 333fd1b3 GSD 0@8
[2014-04-28 13:35:17] 0@16 800MHz: Got nonce d45e7766, Hash <= Htarget! (0x5904b5a9)
[2014-04-28 13:35:17] Accepted 66775ed4 GSD 0@16
[2014-04-28 13:35:29] New job_id: 3335 Diff: 256
[2014-04-28 13:35:29] Stratum detected new block
[2014-04-28 13:35:29] Dispatching new work to GC3355 threads (0x59214988)
[2014-04-28 13:35:34] 0@5 800MHz: Got nonce b0f50320, Hash <= Htarget! (0x59214988)
[2014-04-28 13:35:34] Accepted 2003f5b0 GSD 0@5
[2014-04-28 13:35:40] 0@2 800MHz: Got nonce 69d4d70c, Hash <= Htarget! (0x59214988)
[2014-04-28 13:35:41] Accepted 0cd7d469 GSD 0@2
[2014-04-28 13:35:48] 0@23 800MHz: Got nonce 1b384693, Hash <= Htarget! (0x59214988)
[2014-04-28 13:35:48] Accepted 9346381b GSD 0@23
[2014-04-28 13:35:52] 0@13 800MHz: Got nonce 49634a53, Hash <= Htarget! (0x59214988)
[2014-04-28 13:35:52] Accepted 534a6349 GSD 0@13
[2014-04-28 13:35:57] 0@22 800MHz: Got nonce 1c17e98c, Hash <= Htarget! (0x59214988)
[2014-04-28 13:35:57] Accepted 8ce9171c GSD 0@22
April 28, 2014, 08:13:39 AM
Anyone got -A / --gridseed-autotune option working in the latest binery? It seems broken. I'm testing in Raspberry Pi, with -D and -t option enabled.
How is it broken?
It accepts the --gridseed-autotune option but didn't state it has several steps to go before increasing to the next frequency, nor really increasing the frequency of any cores.
What is the full command line that you used?
April 28, 2014, 08:00:56 AM
Anyone got -A / --gridseed-autotune option working in the latest binery? It seems broken. I'm testing in Raspberry Pi, with -D and -t option enabled.
How is it broken?
It accepts the --gridseed-autotune option but didn't state it has several steps to go before increasing to the next frequency, nor really increasing the frequency of any cores.
April 28, 2014, 07:17:57 AM
I got it to dual mine last night, I was stuck in the back and forth of sha256 / scrypt as well. Before using zadig to overwrite the driver my com port was 4 then it disappears as stated above. I changed the com port to 1 it the batch file for cpuminer and it fired up, very slowly mind you. Once it started hashing scrypt I launched cgminer and it went to work also. I did drop the clock speed for both. I am only using one miner mind you. Currently I am only getting 250 KH/s and 8.77 GH/s
I am sure this is of no/little help but that is what I did messing around and it worked.
I will give this a try also see what happensI am sure this is of no/little help but that is what I did messing around and it worked.
Update: Both are detected using com1 for cpuminer, however cpuminer is not finding any shares at all
See below:
So still no further ahead for me
I have the same problem with one miner, no shares at all, but I don't have dual mining, just LTC. Have anyone solve that problem?
April 28, 2014, 06:41:19 AM
Sandor would you add the coin difficulty to the TUI in the next update? CGminer shows it. Loving your work.
April 28, 2014, 06:05:57 AM
Anyone got -A / --gridseed-autotune option working in the latest binery? It seems broken. I'm testing in Raspberry Pi, with -D and -t option enabled.
How is it broken?
April 28, 2014, 06:01:52 AM
working great but i think the TUI is displaying 5 mhz increments instead of 25 on the auto tune. I see my gridseeds at 845Mhz and 855 etc
It's averaging the frequencies.
Ah ok sorry that makes sense now
April 28, 2014, 05:05:53 AM
Anyone got -A / --gridseed-autotune option working in the latest binery? It seems broken. I'm testing in Raspberry Pi, with -D and -t option enabled.
April 28, 2014, 04:15:45 AM
i keep getting failed to open /dev/ttyACM0
I am running on Raspberry pi:
./minerd --gc3355=/dev/ttyACM0,/dev/ttyACM1,/dev/ttyACM2,/dev/ttyACM3,/dev/ttyACM4,/dev/ttyACM5,/dev/ttyACM6,/dev/ttyACM7 --freq=1000 --gc3355-autotune --url=stratum+tcp://usa-1.liteguardian.com:3335 --userpass=cxxx:x --retries=5
I am running on Raspberry pi:
./minerd --gc3355=/dev/ttyACM0,/dev/ttyACM1,/dev/ttyACM2,/dev/ttyACM3,/dev/ttyACM4,/dev/ttyACM5,/dev/ttyACM6,/dev/ttyACM7 --freq=1000 --gc3355-autotune --url=stratum+tcp://usa-1.liteguardian.com:3335 --userpass=cxxx:x --retries=5
I have the same problem ... I'm using Kernel ... 3.10.37+
I don't have any ttyACM0 in my dev folder ... got 9 Blades connected thru 2 x 10 port usb hubs ... working well with cgminer ...
April 28, 2014, 01:37:18 AM
All i see on my minerd window is total Mhs, A, R, HW and connected to:
Cant get it to show detailed info with additional flags as well...
Either im missing something obvious, or new windows version has bug then running a lot of devices. Currently i tried with 30 gridseeds.
Cant get it to show detailed info with additional flags as well...
Either im missing something obvious, or new windows version has bug then running a lot of devices. Currently i tried with 30 gridseeds.
April 28, 2014, 12:53:55 AM
Downloaded, what must be a newer version of cpuMINER and now I am able to configure each chips freq interdependently. This is truly AWESOME!!!!
Thanks for the help!!!
Thanks for the help!!!
April 27, 2014, 10:02:48 PM
working great but i think the TUI is displaying 5 mhz increments instead of 25 on the auto tune. I see my gridseeds at 845Mhz and 855 etc
It's averaging the frequencies.
April 27, 2014, 09:56:42 PM
working great but i think the TUI is displaying 5 mhz increments instead of 25 on the auto tune. I see my gridseeds at 845Mhz and 855 etc
April 27, 2014, 09:46:32 PM
i keep getting failed to open /dev/ttyACM0
I am running on Raspberry pi:
./minerd --gc3355=/dev/ttyACM0,/dev/ttyACM1,/dev/ttyACM2,/dev/ttyACM3,/dev/ttyACM4,/dev/ttyACM5,/dev/ttyACM6,/dev/ttyACM7 --freq=1000 --gc3355-autotune --url=stratum+tcp://usa-1.liteguardian.com:3335 --userpass=cxxx:x --retries=5
I am running on Raspberry pi:
./minerd --gc3355=/dev/ttyACM0,/dev/ttyACM1,/dev/ttyACM2,/dev/ttyACM3,/dev/ttyACM4,/dev/ttyACM5,/dev/ttyACM6,/dev/ttyACM7 --freq=1000 --gc3355-autotune --url=stratum+tcp://usa-1.liteguardian.com:3335 --userpass=cxxx:x --retries=5
April 27, 2014, 09:30:11 PM
Usage: minerd [OPTIONS]
Options:
-G, --gc3355=DEV0,DEV1,...,DEVn enable GC3355 chip mining mode (default: no)
-F, --freq=FREQUENCY
set GC3355 core frequency in NONE dual mode (default: 600)
-f, --gc3355-freq=DEV0:F0,DEV1:F1,...,DEVn:Fn individual frequency setting
--gc3355-freq=DEV0:F0:CHIP0,...,DEVn:Fn:CHIPn individual per chip frequency setting
-A, --gc3355-autotune
auto overclocking each GC3355 chip (default: no)
-c, --gc3355-chips=N
# of GC3355 chips (default: 5)
-a, --api-port=PORT
set the JSON API port (default: 4028)
-t, --text
disable curses tui, output text
-L, --log
file logging
-o, --url=URL
URL of mining server (default: http://127.0.0.1:9332/)
-O, --userpass=U:P
username:password pair for mining server
-u, --user=USERNAME
Options:
-G, --gc3355=DEV0,DEV1,...,DEVn enable GC3355 chip mining mode (default: no)
-F, --freq=FREQUENCY
set GC3355 core frequency in NONE dual mode (default: 600)
-f, --gc3355-freq=DEV0:F0,DEV1:F1,...,DEVn:Fn individual frequency setting
--gc3355-freq=DEV0:F0:CHIP0,...,DEVn:Fn:CHIPn individual per chip frequency setting
-A, --gc3355-autotune
auto overclocking each GC3355 chip (default: no)
-c, --gc3355-chips=N
# of GC3355 chips (default: 5)
-a, --api-port=PORT
set the JSON API port (default: 4028)
-t, --text
disable curses tui, output text
-L, --log
file logging
-o, --url=URL
URL of mining server (default: http://127.0.0.1:9332/)
-O, --userpass=U:P
username:password pair for mining server
-u, --user=USERNAME
April 27, 2014, 09:18:10 PM
just run the minerd --help in a command prompt is the easiest way to see the list I think
Jump to: