Topic: [GUIDE] Renting out your mining rig to Paycoin (XPY) Miners (Read 3671 times)

just want to pop back onto this thread to say thanks to everyone who tipped me some btc dust, and those who tipped me more than dust, on this topic.

 
cheers guys.


R

my miners all just point to the same betarigs stratum. each miner has that one single stratum as first pool option in the GUI.

screen shot shows miner hashrate ( even though the last renter left feedback which stated it's under power (!?) )

Thanks for the guide mate, the peons are digging hard.

One question, tho - I've noticed that you've combined the power of a few into the megarig, what soft did you use, if that's not a secret ? Is it stratum-proxy ? If it is (a lot of assumptions, I know ) are you using the getwork to stratum or stratum to stratum ? If that's the former, I assume it does not impact the performance of our beloved Spo(o)ns ? If the latter, what about the extranonce ?

Cheers

my github

https://github.com/raskul

all cryptocurrencies in this git are community rights released.
any developer may change and work on the code of the coins.

as is with every cryptocurrency.
thanks.

and i'm offering 3BTC at a silly cheap rate.
https://bitcointalksearch.org/topic/ann-krakencom-exchange-with-usd-eur-gbp-jpy-cad-btc-ltc-xrp-nmc-xdg-str-eth-290799

meanwhile - http://www.rgspix.com/bitcoin_is_in_the_toilet.jpg

see current rate on nicehash homepage at

https://www.nicehash.com/index.jsp

woosh! i get up outta bed and the nicehash network has got to 3.2PH!
still, numbers are ok yet...

Just seems to be a lot rented out at 0.0140 BTC/TH/Day

my SP20 just went rented for 0.1466/TH/day.
sitting pretty  

and nicehash is

Looks like the rush is over?

yeah, not sure why GAW have decided to use the name of an already established alt.. i suppose all the good altcoin names have all been used up - well, there are eleventy-gazillion of them bouncing around their individual blockchains, aren't there!?

Thanks raskul... so two coins with the same name! No wonder I was confused!

bump, more folks asking for help on this.

amended OP title

no mate, it's not the scrypt one. It's a SHA256. I would, however advise caution.. but hey, i'm sure you know what you are doing - you'll get a good rate by renting out your SHA256 rigs and just following the guide above.

best luck

ADD: i don't think this new paycoin has it's own [ANN] thread here, but it does have a massive cult following across many of it's own websites.
this is it's forum: https://hashtalk.org - watch out for the censorship!

Thanks for this thread, sounds interesting... I've never tried renting my rigs out before. Might give it a go.

Regarding Paycoin, is this it:
https://bitcointalksearch.org/topic/annpyc-paycoin-going-to-be-hard-forked-soon-268941

If so, isn't that a Scrypt coin, so a SHA-256 miner like the SP20 wouldn't be able to mine it?

thanks for sharing that. 

http://pastebin.com/RytHd9Wk

sounds good. well, i've set my betarigs to the best price i've managed to attain since yesterday morning when XPY launched.
If they get rented at that rate, it's way over what I'm likely to get on nicehash, when it's not rented at that high price, i take what I can get from the nicehash bidding.

do you have a link to a thread explaining your script? i'd be interested to try it out.

I have a nice script that I wrote, it uses betarigs API to update price based on market conditions every 5 minutes, so you get always rented for the highest possible price.

However, I would not use it on paycoin because the rental market swings WILDLY. There is a really big chance that you will get rented and locked in, and then rental price goes up and you are out of luck. Conversely, you might get rented for a super high price and get locked in. It depends on how much of a gambler you are.

I think nicehash is the better choice for this current phenomenon, because of the super fast setup and especially because you are introducing it to people who don't usually rent (and don't understand rental as a concept).

As stated in the OP, i include nicehash as my 1st failover from betarigs because you can specify your required price on betarigs - hence, you could obtain a higher price.

Why not just point miners to nicehash? It is a lot faster than beta and MRR for people who have never rented before. Its just like another pool.

Instructions here: https://www.nicehash.com/?p=gstarted#seller

There is currently a massive buzz about the new altcoin, Paycoin (XPY).
Some people have been asking me to advise how to rent their new Spondoolies-Tech SP20 miner's hashes out, so that they can benefit from the current high rental prices which are being paid.

This simple guide will help anyone who owns an SP20 mining rig configure their miner to get the most out of this short-term phenomenon, by renting out your SP20 miners to those who are interested in mining Paycoin.

Note: I am not advising that you mine paycoin directly, rather, rent your miners out to those who wish to mine it and earn more BTC than you would normally by mining BTC directly. I am in no way endorsing XPY as a viable asset to hold.

I have set up this guide using my Spondoolies-Tech SP20 1.7TH/s miner. Currently on sale for $695 $659+shipping. I currently only use Spondoolies miners and also have SP10's and an SP31 out for rent using this same methods as stated below.

To get the best rental price possible, start by setting up your pools.
As you can see from this screenie, I have set up the pools in www.myminer.io GUI for the SP20.



I advise that you set your first pool to hash via the betarigs.com proxy. So initially, if you do not already have one, you will need an account at www.betarigs.com and set your prices for each of your miners. This next screenie shows how the setup page looks, including the stratum that you should input as your first pool in your SP20 GUI miner pools list. Set a high price that you would be content to receive for the rental of your miner...



When your miner gets rented out on betarigs, stats show like this:



When your miner gets rented out on the betarigs service, it will activate upon payment and failover to the second pool when the rental ends. This second pool should also be a rental site, i'm using Nicehash.

Use www.Nicehash.com(EU) / www.Westhash.com(USA) as your first failover pool. Setup of this pool is simple; Nicehash have a simple guide here:
https://www.nicehash.com/index.jsp?p=gstarted#seller

Nicehash/Westhash rentals work on a bidding system. Where the highest bidder claims their required share of the hashes.
Prices on Nicehash/Westhash will fluctuate and you have no control over the price, hence why you should use this as your first failover.

Your third /fourth / fifth pools should be your normal BTC mining pool/pools.

I hope this short guide will prove useful, I think everyone should have a chance to benefit from this short-term phenomenon.

I will reiterate, I am not endorsing the mining of Paycoin, nor am I advising that you purchase any Paycoin and I am not affiliated with GAW in any way.
thanks for reading my simple setup guide to renting out your hashes for the most profit possible! As ever I have made this thread open so feel free to discuss it without censorship.


if you found this short guide useful, please tip me at www.thescribe.eu
thanks.