Topic: [Guide] Solo mine testnet bitcoins with cgminer, Bitcoin Core, and a Compac F - page 3. (Read 1896 times)

That's 50,000 times faster than my CPU mining! Would you be interested to try? I still have a synced testnet blockchain running, and could give you access. At low difficulty, I wonder if I made a mistake for not getting anything in days.

Glad to see people now solo mining testnet bitcoins with this guide 

Interesting; I would have expected a CPU / GPU setup to work fine, too then. At difficulty 1, you need a fast network latency in my opinion, but also a block candidate immediately. In case the ASIC is 100x faster, that could play a bigger role than what I anticipated.
Again; I got consecutive blocks a few times, so I guess that a couple hundred GH suffice for consistent blocks rewards.

Yes It is also displayed by mempool.space.
Oddly enough; someone just sent me ‎0.00017893 tBTC, which was no coinbase transaction. Typo? Never happened on mainnet to me, in all these years.

---

I mined:
Block 2411861, Block 2411862 and Block 2411863 in a row.

What needs to be changed for this to work on main net? Remove testnet=1 ?

Nullama, your guide worked great (besides the few points I raised)! Amazing; I hadn't expected to mine multiple blocks per day.
In fact, I managed to grab almost 30 blocks in 24h. Sitting at roughly 0.9tBTC right now.
Even consecutive blocks a few times... I must have very good network latency or something. Only a single Compac F hashing at just under 300GH/s.

It was an awesome experience to solo-mine again (and hit blocks!) and I'll definitely do it again if I need testnet coins and / or for validating a miner / miner driver software.

PS: Check last 24h of blocks for hidden message!

A few recommendations and fixes:

(1) Just add datadir=/home/user/bitcoin_testnet/data to the conf file, as well. Then you won't have to specify it through CLI anymore.

(2) There is a typo here. It should be --enable-gekko; otherwise it will compile just fine, but without Gekko support and you won't even notice.

(3) Cgminer complains about the comma at the end of the last line ("failover-only" : true,); it has to be removed to work.

(4) For anyone unsure how to do this:

I just posted a new guide that doesn't require an ASIC. It only uses the CPU and/or the GPU of a normal computer, so you should be able to test it.

It's a simple text argument, the same as the btc-address argument you have to give in the config file. Just add another line with that.

Just try it out, that's the whole point of the testnet  

That was the motivation for me to do this in the first place 

A couple of things you might want to do:

Keep the log of your first block:


And you can of course write something into the coinbase of the block you found, just add this option to the config file:

That's great to know! I wasn't aware of this rule. Will spin a Compac F up to mine some testnet BTC, then..
I've never hit a solo block, so this should be a pretty cool experience.

Thanks for writing this guide. Although people who currently don't have ASIC better use Signet or Regtest, unless they also want to try their luck with solo mining on Bitcoin mainnet.


Not at some blocks, but after 20 minutes since last block mined. That might be why you mine more block than @NotATether expected.

Nicely detailed guide!

The difficulty was in the millions:


But apparently testnet3 resets diff to 1 at some blocks, as those are the ones I hit:

A few blocks overnight? That means the testnet difficulty is extremely low. Exactly what was the testnet difficulty when you wrote this guide?

I'm sure this will help a bunch of people who are setting up testnet bitcoin mining farms.

If you need some testnet bitcoins, you can easily get them by solo mining. Some other guides I've found in the web are outdated, so I made this one to work with the latest software/hardware.

You'll need:

• Latest version of Bitcoin Core(v23.0 at the time of writing)
• Special build of cgminer that allows solo mining, available from https://github.com/cmmodtools/cgminer with a small update from this guide.
• Ideally an ASIC miner. You can use any miner that works with cgminer, even the USB miner from GekkoScience, the Compac F:
  

To make things simple, for this guide I am going to assume you have two computers, one running a Compac F miner and another one running Bitcoin core. It shouldn't matter if you're running both on the same computer or if you have a different miner.

Step 1: Install and run Bitcoin Core

We're going to use the folder ~/bitcoin_testnet to save everything so that it's easy to remove once you're done and to keep things simple. You can of course use a different path if you want.

Inside ~/bitcoin_testnet create a folder called data:


Download the Bitcoin Core for your platform into ~/bitcoin_testnet/ and extract it there.

Now let's prepare the configuration file. Create a text file named bitcoin_testnet.conf in ~/bitcoin_testnet/ and put these content in it:


The thing that you need to understand here is that you're setting up the Bitcoin node to run in testnet, and you're defining an RPC port(5000 in this case, can be anything), user and password, and whitelisting a specific IP to connect to your node(YOUR_MINER_IP). You'll need these details and your Bitcoin node IP later when connecting from cgminer.

You can now start running your Bitcoin node by doing the following(make sure to change user to your actual user:


If you want, you can keep this running in the background with screen:


You can then see what's happening with:


To detach the screen, simply press Ctrl-A and then Ctrl-D. You'll be back in the console, and the command will continue running in the background.

Step 2: Install and run cgminer

We're going to use an updated repo of cgminer, this one has the latest changes from kano so that we can use the Compac F, plus some fixes that allow solo mining. Of course you might want to change the options to match your environment or miner.


Now, in theory we should be ready, but we need one extra change. Open the file cgminer.c with your favorite text editor and change this line:


To this:


Basically we need to also consider the first symbol of the testnet address, which is either n or m. OK, now run make again:

And now cgminer is compiled and ready. Let's create the configuration file:

Create a text file named ~/bitcoin_testnet/cgminer_testnet.conf with these contents:


If you don't have a testnet btc address yet, note that Bitcoin Core now doesn't generate a wallet by default any more so you will need to create one. You can read about it in createwallet. Then you should be able to getnewaddress. Make sure to use the legacy format as that's what cgminer is expecting. You address should start with n or m.

Alternatively, you can simply use the GUI. To open the GUI, first stop the bitcoind process (Ctrl-C) and then run bitcoin-qt instead. There you'll be able to easily create wallets and generate addresses by clicking around.

And now you can simply run cgminer like this:


You can of course also run it in the background with screen, or run this at startup, etc. It will depend on your particular setup. If you're on a pi for example, you could create a bash shell executable (~/start_mining.sh) with that code and then simply add this to /etc/rc.local:


That's just one example, you can choose to run it however you prefer.

There it is, it should now say:


If you leave it overnight you should hit a few blocks with the Compac F USB miner.

Happy testnet solo mining!