Moderator's note: This post was edited by frodocooper to reduce the size of the embedded image.
Topic: Halong Mining announces the T2, a 17-17.5TH+ Miner - page 3. (Read 1860 times)
Here's a picture that was shared today:
Moderator's note: This post was edited by frodocooper to reduce the size of the embedded image.
Moderator's note: This post was edited by frodocooper to reduce the size of the embedded image.
An integrated power supply is a TERRIBLE idea, I hope that they reconsider.
https://halongmining.com/blog/2018/04/24/dragonmint-t1-manufacturing-update/
Here's the current hashing boards on the T1, they are adding 5 additional chips and integrating a PSU:
Moderator's note: This post was edited by frodocooper to correct erroneous quote formatting.
Quote from: Halong Mining
Some other exciting news is, during the process of fine tuning, we also ran a parallel PCB board design to see if we could squeeze any more efficiency and we ended up with the next model of DragonMint, the T2. This has 68 chips per hashboard, rather than 63 of the T1. The miner is confidently 17TH and above, averaging 17.5TH and above. Efficiency is still being tuned in firmware, and as we are seeing it, range between 93W/TH and 100W/TH at the wall right now.
The T2 has an integrated power-supply, so the device is now plug and play – no more fiddling with long power cables from the PSU, nor will the cables potentially get in the way of the fan airflow.
The T2 has an integrated power-supply, so the device is now plug and play – no more fiddling with long power cables from the PSU, nor will the cables potentially get in the way of the fan airflow.
Here's the current hashing boards on the T1, they are adding 5 additional chips and integrating a PSU:
Moderator's note: This post was edited by frodocooper to correct erroneous quote formatting.
Jump to: