HELP! How to mine with "Dragon USB Miner 144Khs"

youngberg1950

newbie

Activity: 6

Merit: 0

SOLVED my asus router was blocking the traffic so I never recieved work. I turned of the AIProtection and now it working.

THANKS ALL FOR YOUR HELP!

youngberg1950

newbie

Activity: 6

Merit: 0

I copied the files from the drive... that being said I tried as you requested and copied the bat file to the drive and still get the same results.

Crypto_Rocki

newbie

Activity: 18

Merit: 0

Quote from: youngberg1950 on June 27, 2017, 06:56:40 PM

@Sir William

I'm still not able to connect on windows. I registered with suprnova.cc and created a worker. I am using the worker login and worker password. I have tried flipping the switch to both positions. Do i have a bad unit???

c:\Users\young\Desktop\LK-01>cgminer.exe --scrypt -o stratum+tcp://gmc.suprnova.cc:7351 -u login.WorkerName -p WorkerPassword --clock 200 --chips 1 -S //./COM4
[2017-06-27 17:46:01] Started cgminer 3.1.1
[2017-06-27 17:46:05] Probing for an alive pool
[2017-06-27 17:47:06] No servers were found that could be used to get work from.
[2017-06-27 17:47:06] Please check the details from the list below of the servers you have input
[2017-06-27 17:47:06] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[2017-06-27 17:47:06] Pool: 0 URL: stratum+tcp://gmc.suprnova.cc:7351 User: login.WorkerName Password: WorkerPassword
[2017-06-27 17:47:06] No servers could be used! Exiting.

Seems like you are starting your created *.bat file from your Desktop, try to move this file into the drive location to LK folder and start from there...

Sir William

member

Activity: 128

Merit: 11

Hmm, I'm not sure what to tell you. Your command line looks good. I wish I had a better answer for you. When you use the LKcontroller.exe that's on the drive, does it still fail?

youngberg1950

newbie

Activity: 6

Merit: 0

Quote from: Sir William on June 27, 2017, 08:29:37 PM

Quote

I haven't tried suprnova.cc yet so I'll give it a try when I get home. Just to verify that you are using the cgminer that was provided in the 8GB on the ASIC right?

Correct.

Quote

I have tried flipping the switch to both positions. Do i have a bad unit???

I didn't touch the switch at all. It's always possible that it's bad, however, it sounds like you're not connecting to to the server at all. What happens if you ping gmc.suprnova.cc?

I can ping and telnet into that port. Did setup the worker and password correctly?

Sir William

member

Activity: 128

Merit: 11

Quote

I haven't tried suprnova.cc yet so I'll give it a try when I get home. Just to verify that you are using the cgminer that was provided in the 8GB on the ASIC right?

Correct.

Quote

I have tried flipping the switch to both positions. Do i have a bad unit???

I didn't touch the switch at all. It's always possible that it's bad, however, it sounds like you're not connecting to to the server at all. What happens if you ping gmc.suprnova.cc?

Sir William

member

Activity: 128

Merit: 11

Nope. Look again, those figures are per month! The correct figures are at https://www.cryptocompare.com/mining/calculator/ltc?HashingPower=24000&HashingUnit=KH%2Fs&PowerConsumption=0&CostPerkWh=0.12 So, to answer your question, at least 166.

fcaldas

newbie

Activity: 53

Merit: 0

How many of these guys do you need to actually be profitable? Say, $2 a day?

EDIT: seems like you would need 8 or 9 of these guys to make about $2 bucks a day - considering free electricity.
https://www.cryptocompare.com/mining/calculator/ltc?HashingPower=1000&HashingUnit=KH%2Fs&PowerConsumption=0&CostPerkWh=0.12

Is that right?

youngberg1950

newbie

Activity: 6

Merit: 0

@Sir William

I'm still not able to connect on windows. I registered with suprnova.cc and created a worker. I am using the worker login and worker password. I have tried flipping the switch to both positions. Do i have a bad unit???

c:\Users\young\Desktop\LK-01>cgminer.exe --scrypt -o stratum+tcp://gmc.suprnova.cc:7351 -u login.WorkerName -p WorkerPassword --clock 200 --chips 1 -S //./COM4
[2017-06-27 17:46:01] Started cgminer 3.1.1
[2017-06-27 17:46:05] Probing for an alive pool
[2017-06-27 17:47:06] No servers were found that could be used to get work from.
[2017-06-27 17:47:06] Please check the details from the list below of the servers you have input
[2017-06-27 17:47:06] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[2017-06-27 17:47:06] Pool: 0 URL: stratum+tcp://gmc.suprnova.cc:7351 User: login.WorkerName Password: WorkerPassword
[2017-06-27 17:47:06] No servers could be used! Exiting.

youngberg1950

newbie

Activity: 6

Merit: 0

Quote from: Sir William on June 26, 2017, 11:49:40 PM

Quote from: youngberg1950 on June 26, 2017, 07:42:47 PM

Does anyone currently have this working? I can't get past "Waiting for work to be available from pools. No servers were found that could be used to get work from"

I've tried litecoinpool.org:

stratum+tcp://litecoinpool.org:3333   (London, UK)
stratum+tcp://us.litecoinpool.org:3333   (New York, USA)
stratum+tcp://us2.litecoinpool.org:3333   (San Francisco, USA)

and port 8080 for the proxy.

I've also tried prohashing.com:3333

EDIT: also I have tried both the raspberry pi instructions and the software on the stick (both GUI and command line).

I'm not aware of a modified cgminer, that both works on a raspberry pi and this miner. I can help if using a Windows machine. If you're using Linux, you'll want someone else's help.

Thanks, The Linux instructions are in post #21.

I haven't tried suprnova.cc yet so I'll give it a try when I get home. Just to verify that you are using the cgminer that was provided in the 8GB on the ASIC right?

Crypto_Rocki

newbie

Activity: 18

Merit: 0

Quote from: Sir William on June 26, 2017, 11:47:02 PM

Quote from: kakeyun on June 23, 2017, 07:09:39 PM

Hi People,

Just wondering what do I need to include in the batch file if I have more than 1 of these usb miners? Many thanks for your help.

You need to use the COM port. For example, on a Windows machine, use the cgminer that came with the unit. I just write a batch file directly to the unit. This is important, as the official release doesn't appear to be modified to use this miner. Same goes for bfgminer.

Code:

cgminer.exe --scrypt -o stratum+tcp://gmc.suprnova.cc:7351 -u username -p password --clock 200 --chips 1 -S //./COM5
pause

In my case, my miner is on COM5. Use device manager to find your COM port(s). If you have more than one, I believe you add them like follows

Code:

cgminer.exe --scrypt -o stratum+tcp://gmc.suprnova.cc:7351 -u username -p password --clock 200 --chips 1 -S //./COM5//./COM6//./COM7
pause

Also, the clock can go up to 400, but generates additional heat.

Thanks a lot this one is working for me very well! Cheers Cheesy

Sir William

member

Activity: 128

Merit: 11

Quote from: youngberg1950 on June 26, 2017, 07:42:47 PM

Does anyone currently have this working? I can't get past "Waiting for work to be available from pools. No servers were found that could be used to get work from"

I've tried litecoinpool.org:

stratum+tcp://litecoinpool.org:3333   (London, UK)
stratum+tcp://us.litecoinpool.org:3333   (New York, USA)
stratum+tcp://us2.litecoinpool.org:3333   (San Francisco, USA)

and port 8080 for the proxy.

I've also tried prohashing.com:3333

EDIT: also I have tried both the raspberry pi instructions and the software on the stick (both GUI and command line).

I'm not aware of a modified cgminer, that both works on a raspberry pi and this miner. I can help if using a Windows machine. If you're using Linux, you'll want someone else's help.

Sir William

member

Activity: 128

Merit: 11

Quote from: kakeyun on June 23, 2017, 07:09:39 PM

Hi People,

Just wondering what do I need to include in the batch file if I have more than 1 of these usb miners? Many thanks for your help.

You need to use the COM port. For example, on a Windows machine, use the cgminer that came with the unit. I just write a batch file directly to the unit. This is important, as the official release doesn't appear to be modified to use this miner. Same goes for bfgminer.

Code:

cgminer.exe --scrypt -o stratum+tcp://gmc.suprnova.cc:7351 -u username -p password --clock 200 --chips 1 -S //./COM5
pause

In my case, my miner is on COM5. Use device manager to find your COM port(s). If you have more than one, I believe you add them like follows

Code:

cgminer.exe --scrypt -o stratum+tcp://gmc.suprnova.cc:7351 -u username -p password --clock 200 --chips 1 -S //./COM5//./COM6//./COM7
pause

Also, the clock can go up to 400, but generates additional heat.

youngberg1950

newbie

Activity: 6

Merit: 0

Does anyone currently have this working? I can't get past "Waiting for work to be available from pools. No servers were found that could be used to get work from"

I've tried litecoinpool.org:

stratum+tcp://litecoinpool.org:3333   (London, UK)
stratum+tcp://us.litecoinpool.org:3333   (New York, USA)
stratum+tcp://us2.litecoinpool.org:3333   (San Francisco, USA)

and port 8080 for the proxy.

I've also tried prohashing.com:3333

EDIT: also I have tried both the raspberry pi instructions and the software on the stick (both GUI and command line).

kakeyun

newbie

Activity: 5

Merit: 0

Hi People,

Just wondering what do I need to include in the batch file if I have more than 1 of these usb miners? Many thanks for your help.

Novize

member

Activity: 69

Merit: 10

Even if this topic is very old I just want to leave a note here.

I bought this USB miner stick as well. With the help of this thread here I was able to get it working at least with it's core frequency (for me the switch isn't working, too).

However I've written down how to use this stick step by step on my blog. If you bought one of this sticks as well, this may helps you to get it working: http://www.mybitcoin.space/2017/02/how-to-mine-ltc-scrypt-with-asic-miner.html

rockmoney

sr. member

Activity: 439

Merit: 297

www.amazon.com/shops/MinersSupply

FINALLY got mine working (after receiving it in the mail about an hour ago). To get it working on Windows, open explorer, locate device and click on it to open. Now, open Notepad, copy the following, paste it to Notepad, and save file as "XXwhateverXX.bat" to the folder named "LK-01 控制程序" (when saving the file in Notepad, you will need to change "Save as Type" from ".txt Files" to "All Documents" before you can save it as a .bat file)

Copy the following to Notepad & save as your .bat file:

cgminer.exe --scrypt -u XxYour_UsernamexX -p x -o XxURL/Address_of_miningxX --clock 200 --chips 1 -S //./COMx (you will need to open Control Panel & navigate to "Device Manager" so you can find out what COM number your device is using, then replace the x after COMx with that number)

Once you have properly saved that .bat file to the "LK-01 控制程序" folder on your device, simply double-click on it to start mining!

If you need help, feel free to PM me and I will gladly help you! Wink

wolverine5pl

sr. member

Activity: 437

Merit: 250

Quote from: wareck on November 08, 2015, 03:10:56 PM

Hi
I build a slighty moddified cgminer
You to use LTKEC.com scrypt usb stick with last version of cgminer on linux

you can download there : https://[email protected]/wareck/cgminer-dragon.git

Code:

git clone https://[email protected]/wareck/cgminer-dragon.git
cd cgminer-dragon
sh autogen.sh
./configure --enable-scrypt --enable-zeus
make

and then to use it :

Code:

./cgminer --scrypt -o pool_address -u user_or_ltc-address -p password --zeus-chips 1 --zeus-clock 200

Works great even at 382 mhz:)
Big thanks

kanazawa

hero member

Activity: 756

Merit: 500

Should I run this thing a whole night to see if it works?

I almost throw it away hahahahahahah... gonna see if this shit works NOW.

Let's see if I'm so donkey as I'm thinking.. hahah

Cool

edit: no, this fucking shit doesn't work... it's crap.

MRKLYE

legendary

Activity: 1358

Merit: 1003

Designer - Developer

Stupid idea but did you look online to see if you had the right drivers..?

I know depending on what version of windblows you are using you needed to install different drivers for the older USB miners in order to get them to do anything more than light up LED's

I'd look into it for sure.,. surely someone has a help guide for these devices done up.

Topic: HELP! How to mine with "Dragon USB Miner 144Khs" (Read 9742 times)