Help Needed (0.05 BTC prize) - page 3.

mettalmag

legendary

Activity: 1084

Merit: 1003

≡v≡

Quote from: gablay12 on December 04, 2016, 06:54:48 AM

Quote from: eckmar on December 04, 2016, 06:34:58 AM

Are all of your cards connected to the same server PSU or you are using 2 different psus , one for MB and cpu and other one for GPU power ? When you said Same for the 10 rigs did you mean that you have 10 completely same rigs and you tried adding this card to every single one of them or what ?

I have HP 1500 watt server PSUs.To feed mother board and one card I also have a corsair CX750 M.

I bought 50 cards.I have got 10 pcs of 5 card rigs.

Either feeding from server psu or from corsair 4 cards works perfectly.However the fifth one does not work.I can see it at the configuration with a yellow label warning.

download newer or last AMD driver, unpack it default is C:\
open Manage, then right click to that yellow labeled GPU then Update Driver Software and Browse my computer for driver software, then point were you unpacked AMD driver and wait for installation to finish.

gablay12

legendary

Activity: 918

Merit: 1000

Thanks for the answers.

I will try and give feed back ASAP.

A friend sent a PM to check crossfire setup and close it.It did not work.

I have different versions of powered risers.Risers are not the reason.

I will try your offerings ASAP.

PS:My motherboard is H81 Pro Btc by Asrock.

t2yax

sr. member

Activity: 462

Merit: 250

Arianee:Smart-link Connecting Owners,Assets,Brands

problem may be about ULPS

ULPS is an ultra low power saving feature which turns off all GPU's except the primary one in use. ULPS can cause crashing / stuttering / reduced scaling when enabled. ULPS is always enabled by default. It can't be fully disabled via software such as MSI Afterburner or Sapphire Trixx (as of 11/01/2016) since AMD Crimson (and some previous CCC versions) changed various reg entries which controlled ULPS. Before following the guide, read the Q & A below.

Solution

1) Click Start - Type regedit.exe and hit enter.
2) In reg editor, press F3 and type EnableULPS, hit enter.

3) Keep pressing F3 until it finds a key called EnableUlps in a sub folder called 0000
4) Double click the reg entry and change value from 1 to 0.

5) Keep pressing F3 until it finds a key called EnableUlps in a sub folder called 0001
6) Double click the reg entry and change value from 1 to 0.

BenCodie

legendary

Activity: 1666

Merit: 1037

Are you using 2 PSUs for 1 Rig? 1 server psu for GPUs and 1 standard PSU for Mobo's?
If yes then there is timing issue.
Do change your risers and use USB Power risers with big capacitor.
For RX 480 use 16.9.2 and for 390 use 15.12.

Thats it you will be fine

EDIT: There is no issue in your RAM neither in SSD, Windows10 and in Antivirus.
Just do what i said above and keep your rig shutdown atleast for 1hour or so.
Then you are good to go.

chup

sr. member

Activity: 736

Merit: 262

Me, Myself & I

1. Upgrade BIOS to last version for the motherboard.
2. Switch off in BIOS all hardware not needed for rig functioning (ex. integrated graphics, sound, communication ports...)
3. Make in BIOS PCIe to gen2 mode, if not successful than gen1.
4. Install 7GPU hack https://bitcointalksearch.org/topic/7xgpu-windows-modding-amd-video-driver-is-the-answer-712228
5. If above does not work, please provide exact motherboard type

Altcoining

full member

Activity: 138

Merit: 100

Quote from: gablay12 on December 04, 2016, 06:55:28 AM

Quote from: Altcoining on December 04, 2016, 06:40:56 AM

I'm wondering how you say (from what i understand) that your rig has 5 GPU's?

I have Asrock Pro Btc as mobo.

That clears things up, it slipped that H81 was a chipset Cheesy

Have you tried changing the PCI-E settings in the BIOS?

chronek

sr. member

Activity: 273

Merit: 250

BD People Are Legend

I didn't understand... What mean 1 gpu remains, what miner detect? any error in device manager? maybe you need apply 6xgpu mod again?

gablay12

legendary

Activity: 918

Merit: 1000

Quote from: Altcoining on December 04, 2016, 06:40:56 AM

I'm wondering how you say (from what i understand) that your rig has 5 GPU's?

I have Asrock Pro Btc as mobo.

gablay12

legendary

Activity: 918

Merit: 1000

Quote from: eckmar on December 04, 2016, 06:34:58 AM

Are all of your cards connected to the same server PSU or you are using 2 different psus , one for MB and cpu and other one for GPU power ? When you said Same for the 10 rigs did you mean that you have 10 completely same rigs and you tried adding this card to every single one of them or what ?

I have HP 1500 watt server PSUs.To feed mother board and one card I also have a corsair CX750 M.

I bought 50 cards.I have got 10 pcs of 5 card rigs.

Either feeding from server psu or from corsair 4 cards works perfectly.However the fifth one does not work.I can see it at the configuration with a yellow label warning.

Altcoining

full member

Activity: 138

Merit: 100

I'm wondering how you say (from what i understand) that your rig has 5 GPU's?

eckmar

legendary

Activity: 1878

Merit: 1038

Telegram: https://t.me/eckmar

Are all of your cards connected to the same server PSU or you are using 2 different psus , one for MB and cpu and other one for GPU power ? When you said Same for the 10 rigs did you mean that you have 10 completely same rigs and you tried adding this card to every single one of them or what ?

gablay12

legendary

Activity: 918

Merit: 1000

Additional info: I use server PSUs for powers.They work without problem for my other rigs.

My ram are ddr3 and 8 gb.

Hard disk is ssd, 120 gb.

High quality risers.

OS is Windows 10, licenced.

No virus protection program enabled.

Virtual memory is set to 16 Gb.

Batchfile is the same for my other rigs which work perfectly.

gablay12

legendary

Activity: 918

Merit: 1000

I own Asus RX 480 ROG 8 gb.My mobo is Asrock H81 and , cpu is 3250 Intel.

I also have R390 nad RX480 reference without problems.However with my new card only 4 of them works but 1 remains .Same for the 10 rigs.Any suggestions?

This situation is valid for 10 rigs.

I offer 0.05 BTC price for the first, valid solution.

Topic: Help Needed (0.05 BTC prize) - page 3. (Read 3561 times)