Topic: Help with erupter blade please. - page 2. (Read 1988 times)
Yes I have used that Ip for the blade give me a no internet connection or webpage not found.
192.168.1.254
ok dissconect from all networks and unplug any wireless dongles reset the blade to default by connecting the 2 little solder points where it says reset
then configure you computer to use the default ip to access the blade
i dont remember the ip off the top of my head but its pretty easy to find
then configure you computer to use the default ip to access the blade
i dont remember the ip off the top of my head but its pretty easy to find
I have posted on different threads with little help one person was helping me but now he isn't replying to my posts. This is the situation I had changed my ip to 192.168.1.10 and got the blade connected last night but I accidently changed the blade to 192.168.1.24 then I set my Ip address to obtain an Ip automatically I have a 192.168.0.x Ipv4 address from my router I also tried changing my Ip on my router to 192.168.1.x nothing why was I able to connect to it last night once using the same methods then I was never able to connect to it again? if you want pictures of my set up just ask and I will post them but may not be necessary as the description of the problem is stated. I have tried connected to the one I changed it to I also clicked on update server in the options page of the blade. I have also reset the blade a few times still same problem.
Jump to: