Pages:
Author

Topic: HoboNickels - HBN - High Fast Stake - Version 2.0! More Secure, Less Intensive - page 57. (Read 478852 times)

legendary
Activity: 1540
Merit: 1060
May the force bit with you.
Version 1.5.5.5 is out and so is the new blockchain.

https://github.com/Tranz5/HoboNickels/releases/latest

http://hobonickels.info/HBNBlockChain.zip


If you had trouble please upgrade and download the zip to get back to current. The Block Explorer has updated and is in good shape now.


I get the error loading blkindex.dat message with the v.1.5.5.5 Do i realy need to resync the whole chain?
Might there be an initialisation bug? It's because I dont have such a file in my AppData folder..
Currently there is a blk0001.dat and blk0002 file available.

Just a bad error message. But likely something was wrong with your index.

http://hobonickels.info/HBNBlockChain.zip

Just grab this .zip and replace your blk0001.dat nad blk0002.dat and rename or remove your txleveldb folder and replace it with the one in the .zip


i was going to mention that pre-leveldb error message, but it slipped my mind.
i got it too last week.
i had copied the txleveldb subfolder files over Samba networking and most of the files and folder had ownership/group set incorrectly. essentially that message was trying to say "permissions denied" to those files.
so "check ownership and read/write access to files" is always good generic advice Smiley





Ahhh I will also try to remember to open then up completely as well.  Didn't think of this. Thanks.
dnp
full member
Activity: 401
Merit: 110
Version 1.5.5.5 is out and so is the new blockchain.

https://github.com/Tranz5/HoboNickels/releases/latest

http://hobonickels.info/HBNBlockChain.zip


If you had trouble please upgrade and download the zip to get back to current. The Block Explorer has updated and is in good shape now.


I get the error loading blkindex.dat message with the v.1.5.5.5 Do i realy need to resync the whole chain?
Might there be an initialisation bug? It's because I dont have such a file in my AppData folder..
Currently there is a blk0001.dat and blk0002 file available.

Just a bad error message. But likely something was wrong with your index.

http://hobonickels.info/HBNBlockChain.zip

Just grab this .zip and replace your blk0001.dat nad blk0002.dat and rename or remove your txleveldb folder and replace it with the one in the .zip


i was going to mention that pre-leveldb error message, but it slipped my mind.
i got it too last week.
i had copied the txleveldb subfolder files over Samba networking and most of the files and folder had ownership/group set incorrectly. essentially that message was trying to say "permissions denied" to those files.
so "check ownership and read/write access to files" is always good generic advice Smiley



legendary
Activity: 1540
Merit: 1060
May the force bit with you.
Version 1.5.5.5 is out and so is the new blockchain.

https://github.com/Tranz5/HoboNickels/releases/latest

http://hobonickels.info/HBNBlockChain.zip


If you had trouble please upgrade and download the zip to get back to current. The Block Explorer has updated and is in good shape now.


I get the error loading blkindex.dat message with the v.1.5.5.5 Do i realy need to resync the whole chain?
Might there be an initialisation bug? It's because I dont have such a file in my AppData folder..
Currently there is a blk0001.dat and blk0002 file available.

Just a bad error message. But likely something was wrong with your index.

http://hobonickels.info/HBNBlockChain.zip

Just grab this .zip and replace your blk0001.dat nad blk0002.dat and rename or remove your txleveldb folder and replace it with the one in the .zip
jr. member
Activity: 109
Merit: 6
Version 1.5.5.5 is out and so is the new blockchain.

https://github.com/Tranz5/HoboNickels/releases/latest

http://hobonickels.info/HBNBlockChain.zip


If you had trouble please upgrade and download the zip to get back to current. The Block Explorer has updated and is in good shape now.


I get the error loading blkindex.dat message with the v.1.5.5.5 Do i realy need to resync the whole chain?
Might there be an initialisation bug? It's because I dont have such a file in my AppData folder..
Currently there is a blk0001.dat and blk0002 file available.
legendary
Activity: 1540
Merit: 1060
May the force bit with you.
i presume combine/split threshold are involved with staking.
but is it that they actually do or affect?
what are the usual strategies for picking an optimal value?


Best for the network is lots of small blocks that keep the chain moving and each only have a small amount of weight, so as not to cause mass block flooding.

Pre version 1.5.5.5 bigger block were more necessary because the wallet was very laggy with many blocks. But not I am running wallets with thousands of 5 or lower blocks and things are still staking nicely.

It is all in your own taste. The only thing you want to avoid is creating HUGE blocks that would cause you to get your stake reward truncated.
legendary
Activity: 1540
Merit: 1060
May the force bit with you.
My wallet synced when I updated to the latest version days ago, but for the past few days it is still trying to sync after loading the wallet again it re-scans the blockchain, takes hours to do so.

The last block number 5610710
Last block time: Thu Aug 31 14:28:17 2017

Rescan can take time, depending on how deep it had to go.  Shouldn't take to much time if you just sync'd a day or so ago.  What does your debug say?

After it is complete the catch up should be pretty quick.

2017-09-02 02:06:22 SetBestChain: new best=4422b58b8521fadb83fc height=5618484 trust=87133663234171 blocktrust=16821621 date=09/02/17 02:05:32
dnp
full member
Activity: 401
Merit: 110
i presume combine/split threshold are involved with staking.
but is it that they actually do or affect?
what are the usual strategies for picking an optimal value?
full member
Activity: 147
Merit: 100
When I try to set:
combinethreshold 9000
splitthreshold 9000

I have result
20:10:57

combinethreshold 9000
20:10:57
{
"amount" : 200.00000000
}
20:11:11
splitthreshold 9000
20:11:12
{
"amount" : 100.00000000
}
Version of HBN 1.5.5.5
How to set bigger number of combine?

Get more HBN.
The threshold is limited by the total amount of coins you hold. The more coins => the higher threshold.
newbie
Activity: 26
Merit: 0
My wallet synced when I updated to the latest version days ago, but for the past few days it is still trying to sync after loading the wallet again it re-scans the blockchain, takes hours to do so.

The last block number 5610710
Last block time: Thu Aug 31 14:28:17 2017
sr. member
Activity: 536
Merit: 250
When I try to set:
combinethreshold 9000
splitthreshold 9000

I have result
20:10:57

combinethreshold 9000
20:10:57
{
"amount" : 200.00000000
}
20:11:11
splitthreshold 9000
20:11:12
{
"amount" : 100.00000000
}
Version of HBN 1.5.5.5
How to set bigger number of combine?
member
Activity: 227
Merit: 26
“BitCloud [BTDX]”
Good Job  Grin

2017-08-31 18:34:36 partner [2a01:4f8:202:7021::1806]:42221 using obsolete version 70007; disconnecting

What is this ? :

2017-08-31 18:31:06 socket recv error 10054
2017-08-31 18:33:48 socket recv error 10053

legendary
Activity: 1540
Merit: 1060
May the force bit with you.
Version 1.5.5.5 is out and so is the new blockchain.

https://github.com/Tranz5/HoboNickels/releases/latest

http://hobonickels.info/HBNBlockChain.zip


If you had trouble please upgrade and download the zip to get back to current. The Block Explorer has updated and is in good shape now.
legendary
Activity: 1540
Merit: 1060
May the force bit with you.
Not sure what is quite up yet.  All wallets should be at block

2017-08-31 00:51:21 SetBestChain: new best=13a32b329188aed1f56d height=5609925 trust=86985634388565 blocktrust=17255903 date=08/31/17 00:50:57

Cryptopia is on the correct chain.  

chainz.cryptoid.info does not appear to be. I will contact them.

I will release version 1.5.5.5 here tonight or tomorrow that will disconnect bad clients. Pleas ensure you are at version least version 1.5.3+ or preferably at 1.5.5.4 (soon 1.5.5.5).

I will also update the block chain download on hobonickels.info so  we can ensure everyone is on the correct chain, who maybe having trouble.

I'm guessing height is the latest block?  So your saying 5609925

My client says, when I go to Network, then Current Block info
I get:
Last Block Number: 5605101
POW Diff: 0.234283
POW Mh/s: 0.545091

Hash-to-Coins pool has the HBN coin offline - I didn't notice (I mine HBN too).  I know I checked it, at least a week ago.  It says wallet is fine with connections.
        



I wonder if they are on the wrong client and began to mine PoW and some of the other wallets jumped on that chain. The most current block right now is.

 SetBestChain: new best=cfde0008286d2ed7d3c5 height=5610188 trust=86990034241448 blocktrust=17473922 date=08/31/17 02:23:12

If you are not at least there right now, then you will have to update. The blockchain and new version are uploading now. Done in a few hours.

member
Activity: 159
Merit: 11
Not sure what is quite up yet.  All wallets should be at block

2017-08-31 00:51:21 SetBestChain: new best=13a32b329188aed1f56d height=5609925 trust=86985634388565 blocktrust=17255903 date=08/31/17 00:50:57

Cryptopia is on the correct chain.  

chainz.cryptoid.info does not appear to be. I will contact them.

I will release version 1.5.5.5 here tonight or tomorrow that will disconnect bad clients. Pleas ensure you are at version least version 1.5.3+ or preferably at 1.5.5.4 (soon 1.5.5.5).

I will also update the block chain download on hobonickels.info so  we can ensure everyone is on the correct chain, who maybe having trouble.

I'm guessing height is the latest block?  So your saying 5609925

My client says, when I go to Network, then Current Block info
I get:
Last Block Number: 5605101
POW Diff: 0.234283
POW Mh/s: 0.545091

Hash-to-Coins pool has the HBN coin offline - I didn't notice (I mine HBN too).  I know I checked it, at least a week ago.  It says wallet is fine with connections.
        

legendary
Activity: 1540
Merit: 1060
May the force bit with you.
Not sure what is quite up yet.  All wallets should be at block

2017-08-31 00:51:21 SetBestChain: new best=13a32b329188aed1f56d height=5609925 trust=86985634388565 blocktrust=17255903 date=08/31/17 00:50:57

Cryptopia is on the correct chain. 

chainz.cryptoid.info does not appear to be. I will contact them.

I will release version 1.5.5.5 here tonight or tomorrow that will disconnect bad clients. Pleas ensure you are at version least version 1.5.3+ or preferably at 1.5.5.4 (soon 1.5.5.5).

I will also update the block chain download on hobonickels.info so  we can ensure everyone is on the correct chain, who maybe having trouble.
dnp
full member
Activity: 401
Merit: 110
Did we fork ? my cryptopia deposits are not showing up. blockchain is now 3 hours behind.


something is not right, I've been saying it for a day or 2 now, looks like a fork, but im pretty low on the technical side, make sense, my wallet will only sync when it connects to the others on the other fork

must have forked, i'm at block 5609602 and the explorer at chainz.cryptoid.info is at 5604955 both with recent timestamps.

oopsie !
member
Activity: 159
Merit: 11
Did we fork ? my cryptopia deposits are not showing up. blockchain is now 3 hours behind.


something is not right, I've been saying it for a day or 2 now, looks like a fork, but im pretty low on the technical side, make sense, my wallet will only sync when it connects to the others on the other fork
legendary
Activity: 1232
Merit: 1000
Did we fork ? my cryptopia deposits are not showing up. blockchain is now 3 hours behind.
member
Activity: 159
Merit: 11
Having problems syncing my wallet now, been having problems starting today - 16 hours ago.  Have I missed something?  I'm having issues maintaining connections.  Ive added the connections pulled from Crytopia's HBN peers.

ver v1.5.3.0-gf46fa0c-V1.5





Is this a new issue, or what?

Do I need to upgrade my wallet?

It is syncing some, but can't keep up, keeps loosing peers.
full member
Activity: 203
Merit: 100
Why blocks are generated more often than before all the time you have to merge (manually ofcourse)?...
Please make automerge function!

Use in the debug windows / Console

Code:
combinethreshold 5000
splitthreshold 5000

Pages:
Jump to: