Topic: Hosting CoinTerra @home (Read 1164 times)
Another idea - get one of APC power strips - they can run 240V off 2 phases.
Your are likely going to need two 240V 45AMP circuits installed. A whole house surge protector is recommended also, as 240V surge protectors for high AMP devices are much more expensive than using a single whole house protector. You would likely need 200AMP mains service to support this along with your normal needs, which not all house have. Best bet is going to be calling up a electrician and them come out to give a quote.
why do you need two 45 amp circuits?
2100 watts at 240 volts is 9 amps... you won't need two circuits... one will do.
however, if you're using 120 volts... then you'll need two circuits, because 18 Amps continuous draw is higher than the average household breaker.
They are far too loud for a residential setup.
And at $300 per month for hosting, you will lose money each month shortly. The ASIC gold rush is over.
And at $300 per month for hosting, you will lose money each month shortly. The ASIC gold rush is over.
Quote
Several? Your going to have issues, A single CT needs 2 separate 15A 120v breakers to function, unless you have spare 20/30A breakers for stove/dryer etc.
I thought this is gonna happen, I hope i do not have to convince my friends to babysit the miners.
Do you think it would be very difficult /expensive to install the right breakers ? Obviously done by an "electricity expert".
Hey Hiroaki, I'm Dalkore's business partner and another owner at www.bitcoinasichosting.com
Something I need to stress is making sure you calculate the total cost of everything required to do an electrical upgrade to a residential unit. Permitting, wiring, paneling, and installation of A/C are the things that come immediately to mind. Also, unless you are the owner of the house, doing extensive power upgrades that will be left at the house might be something to consider. Last thing is simply the noise and the heat. These Cointerras are LOUD, expect to hear one from 2-3 rooms away in a residential setting.
Hope you find the best solution for your mining needs!
StringTheory
PS. Don't run 3 or more in a small house unless you love nonstop Dubstep
Since you are asking these question, I would call a electrician. If you screw up you can burn down your house. destroy your miner
I got 4x 20A circuits installed for $200, including parts.
Don't forget your cooling. 75 degrees or less is where you need to keep the room for optimal hashing.
It's in a cold basement. 37F is ambient temp.
I got 4x 20A circuits installed for $200, including parts.
Don't forget your cooling. 75 degrees or less is where you need to keep the room for optimal hashing.
I got 4x 20A circuits installed for $200, including parts.
0.o here in uk its 32A 230v, whats ur V rating
PMed you. I will send you a hosting quote. These units eat a ton of juice and need good cooling.
Cheers,
Dalkore
Cheers,
Dalkore
$68 month for $7 your cost in electricity? No thank you. That's like a 900% mark up, I am in the wrong business.
Is my math wrong? That seems a bit steep.
Sure the power is cheap but the redundant power infrastructure, large commercial HVAC, redundant fiber connection, 24 hour monitoring and tech support (they do have issues) is not $7. You need the low power cost to keep everything else cheaper. I will be doing a video tour soon and that will help people see what it entails. Thank you for your question.
I got 4x 20A circuits installed for $200, including parts.
Quote
A liberal estimate (using a *good* electrician) would be about $2000.
Thanks. Dalkore's offer sounds as well interesting
Quote
Your are going to likely go to need two 240V 45AMP circuits installed. A whole house surge protector is recommended also, as 240V surge protectors for high AMP devices are much more expensive than using a single whole house protector. You would likely need 200AMP mains service to support this along with your normal needs, which not all house have. Best bet is going to be calling up a electrician and them come out to give a quote.
That sounds like the best solution. I will give a few calls to some electricians and let you guys know what the outcome will be.
Anyone an idea what this could cost ?
A liberal estimate (using a *good* electrician) would be about $2000.
Quote
$68 month for $7 your cost in electricity? No thank you.
Is my math wrong? That seems a bit steep.
Is my math wrong? That seems a bit steep.
I think it is: $295.64/month
http://bitcoinasichosting.com/pricing
I took the calculation form the BFL Single SC #.
The Terraminer IV is a much better deal. Only about 10-15% markup. Maybe this is due to the rack mount nature of TMIV.
Quote
$68 month for $7 your cost in electricity? No thank you.
Is my math wrong? That seems a bit steep.
Is my math wrong? That seems a bit steep.
I think it is: $295.64/month
http://bitcoinasichosting.com/pricing
PMed you. I will send you a hosting quote. These units eat a ton of juice and need good cooling.
Cheers,
Dalkore
Cheers,
Dalkore
$68 month for $7 your cost in electricity? No thank you. That's like a 900% mark up, I am in the wrong business.
Is my math wrong? That seems a bit steep.
PMed you. I will send you a hosting quote. These units eat a ton of juice and need good cooling.
Cheers,
Dalkore
Cheers,
Dalkore
Quote
Your are going to likely go to need two 240V 45AMP circuits installed. A whole house surge protector is recommended also, as 240V surge protectors for high AMP devices are much more expensive than using a single whole house protector. You would likely need 200AMP mains service to support this along with your normal needs, which not all house have. Best bet is going to be calling up a electrician and them come out to give a quote.
That sounds like the best solution. I will give a few calls to some electricians and let you guys know what the outcome will be.
Anyone an idea what this could cost ?
Since you are asking these question, I would call a electrician. If you screw up you can burn down your house.
Quote
Several? Your going to have issues, A single CT needs 2 separate 15A 120v breakers to function, unless you have spare 20/30A breakers for stove/dryer etc.
I thought this is gonna happen, I hope i do not have to convince my friends to babysit the miners.
Do you think it would be very difficult /expensive to install the right breakers ? Obviously done by an "electricity expert".
Your are likely going to need two 240V 45AMP circuits installed. A whole house surge protector is recommended also, as 240V surge protectors for high AMP devices are much more expensive than using a single whole house protector. You would likely need 200AMP mains service to support this along with your normal needs, which not all house have. Best bet is going to be calling up a electrician and them come out to give a quote.
Jump to: