Topic: How are 4gb cards still able to pull 24-27mhs from mining ETH today? (Read 488 times)

Ive tested using RX560 4gb = 13.60mhs  (corrected as it finished tuning)
Ive tested using RX550 4gb = 11.21mhs

Thats the smallest/olderst RX cards i still have.

Thanks for all the help.
I’ve got 25+ on h110 and 22+ on socket 775

What a cheap good cheap mobo that you suggest?

Did you test rx560 too? Are they worth it?

Ps: I love mmpos so far, it’s very light and good os. I’m running it live from usb without any problems. I’ll soon switch to it

Yes give it a few minutes and watch the screen will do a base line tune 4 parts then tune each gpu then fine tune.  Hash will go up and down and when it complete tuning to will pick the most efficient.

Make sure card is in the slot (not on riser) for max effect.  Should end up 25+mhs.

Keep it running for a while, it needs to auto-tune.

unfortunately, i'm getting 0 hashrate in zombie mode, is there something wrong here:

...
|           Made by Lolliedieb, February 2021             |
+---------------------------------------------------------+

Setup Miner...
Device 0:
    Name:    Radeon RX 580 Series
    Address: 1:0
    Vendor:  Advanced Micro Devices (AMD)
    Memory:  4081 MByte (4062 MByte free)
    --zombie-tune auto
    --4g-alloc-size parameter not set
    Max epoch (approx): 381
    Active:  true (Selected Algorithm: ETHash)

Connecting to pool...
Connected to eth-eu2.nanopool.org:9433  (TLS enabled)
Error: Handshake failed with message short read
Lost connection to stratum server eth-eu2.nanopool.org:9433 or server not reachable.
Trying to connect in 1 second
Connected to eth-eu2.nanopool.org:9433  (TLS enabled)
TLS Handshake success
Set Ethash stratum mode: Ethereum Proxy
Authorized worker: xxxx
New job received: 0xf8d278 Epoch: 399 Target: 000000006df37f67
-------------------------------------------------------
         Generating light cache for epoch 399
-------------------------------------------------------
Start Mining...
New job received: 0xf8d278 Epoch: 399 Target: 000000006df37f67
New job received: 0x4cf352 Epoch: 399 Target: 000000006df37f67
New job received: 0x1ae452 Epoch: 399 Target: 000000006df37f67
New job received: 0x6005fe Epoch: 399 Target: 000000006df37f67
-------------------------------------------------------
     Done (3836 ms), size of new DAG: 4216 MByte

GPU 0: insufficient memory for DAG epoch 399.
GPU 0: will be in Zombie mode with reduced hashrate.
New job received: 0xe97f2b Epoch: 399 Target: 000000006df37f67
New job received: 0xfc6940 Epoch: 399 Target: 000000006df37f67




lolminer running params are here:
./lolMiner --algo ETHASH --pool ssl://eth-eu2.nanopool.org:9433 --user 0xxx

obviously it is better to use fewer cards but at full capacity than all the cards with less yield, i have to try this type of mining the 2 most performing 4g cards on eth and the others on rvn, maybe this way the earnings go up

Thanks for the info, I’ll give it a try today 🙏🏻

Yes eth for the 4gb cards direct in board (1 or 2) then the ones on risers go on rvn or whatever else is best.
For dual mining or triple mining or even quad mining i run mmpos (mmpos.eu)
For some dual mining i run ethos (which is very old but still works well on older cards
For two rigs they are just ubuntu current version.  Dual mining is as easy as using the screen command to have several screen to run from.  Google screen command in linux for syntax and usage.  

I use the -devices= option in lolminer and teamredminer to select the cards for each miner regardless of linux version used.

Using the ctrl-a+d keystrokes you can switch back to main screen and the sub screen keeps running.  Use screen -list to see all sub screens...and screen -r miner0 or screen -r miner1 to go from main screen to miner0 or miner1....where miner0 = the screen - list # or name. 

what linux os did you used? Did you be able to run eth + rvn on same machine? could you pelase explain more?

https://www.reddit.com/r/gpumining/comments/lwh3un/4gb_fury_radeon_pro_duo_25mhs_per_cardmore_if_i/

I played with this myself and did some fun stuff.

The Radeon Pro Duo, which is 2x Fury 4GB card in one with a X99 Board and 6850X(lots of PCI-E lanes). It's possible to have these Dual GPUs still do 25-27mh/s on ETH. Each GPU gest x8 PCI-E lane and only using 1x PCI-E x16 lane.

Theorically using Zombie Mode, X99 board with PLCX chip(lots of PCI-E lanes) and Dual GPU, I can make a rig of 5 RadeonPro Duos and have a 10-gpu 4GB rig at near full ETH speeds.

My 2970wx does 3 at full speed.  I do not recommend using this combo...but i had an extra x399 and TR2 so why not.

WRX-80 to the rescue 

Yes this is correct, even if there was a motherboard which had 6x of the x16 connectors, it would not have enough lanes which is a limiting factor of the motherboard chipset and CPU.

This is why if you got 1 GPU and plug it into the x16 slot, it uses 16 lanes. However if you got 2 GPUs, then both of them run at 8 lanes each. The first GPU downgrades into 8x. Most people don't realise that just because its a different slot doesn't mean the lanes are indepedant. The lanes are shared between the slots.

I realised this when I would fill up an entire motherboard full of GPUs and one of them wouldn't work. Upon investigation it turns out that the lanes are shared and most of the x1 are disabled if others are filled. Hence why you should always read the instruction manual which has a diagram for all the available lanes.

Actually Even mining boards with a single long slot work fine.  i have done this on H81 and even TB85.  1 4gb in gpu 0 slot mining eth.  The other gpus on another coin on risers.  Running the one card on eth pays more than running it on any other coin currently.  The other slower cards are better on other coins than the reduced speed due to dag on eth. 

There is a problem. If there are 6 video cards on the farm, then only 1 or 2 will give a hash rate above 20 megahash, and the other 4 will mine at 8 megahash.
It is possible to configure 2 miners in Hive OS and select 2 video cards for mining Ethereum  and 4 for mining RVN, but I have not tried it

4 video cards will give 100 megahash, if you have such a motherboard, but I do not have such motherboards. I use cheaper mobo.

Or just mine RVN without all that hassle

maybe the hashrate is a bit lower in lolminer's zombie mode but it still a great solution to be able to go on, continue mining for all those who do not want or cannot change their video cards

This is only possible if you already have a motherboard that has several PCI-e x16 connectors. However, buying a dedicated motherboard is not good because the price of a motherboard with 7 PCI-e x16 connectors is over 400 euros. Also the processor must support a lot of PCI-e lines, e.g. i7 or i9 with 40 PCI-e lines (e.g. socket 2066 etc.). You know that the processor for that socket is extremely expensive. However, even then you will not achieve full speed on all graphics cards but only for two and a half speeds for the third (2 x 16 + 1 x 8 = 40 PCI lines).

Only Linux... Windows no space in memory Ram