Pages:
Author

Topic: How can I remotely power cycle my modem/router? (Read 22544 times)

hero member
Activity: 756
Merit: 500
Call your cable co... they can take care of the modem at least and half the time the router will kick in when the modem comes back up.
newbie
Activity: 24
Merit: 0
you can program rules, for example shutdown 2 minuts and rearmed, in this case no need internet  Grin
hero member
Activity: 752
Merit: 500
i have belkin wemo swich 49$ work fine

Hows it work with no internet?
That's pretty cool too.  I live in an apartment complex.  Maybe I can tap a neighbors wifi to get this to work.  But I can't depend upon it. I may consider one of these for security purposes.  Thanks!
legendary
Activity: 2912
Merit: 1060
i have belkin wemo swich 49$ work fine

Hows it work with no internet?
newbie
Activity: 24
Merit: 0
i have belkin wemo swich 49$ work fine
hero member
Activity: 752
Merit: 500
Maybe use one of those timers which people use to autmatically power the lights on and off to scare the thiefs? and then just set it like a real short off period and you should be all set!
you know, that's actually a really good idea. Thanks!
hero member
Activity: 812
Merit: 1000
I <3 VW Beetles
Maybe use one of those timers which people use to autmatically power the lights on and off to scare the thiefs? and then just set it like a real short off period and you should be all set!
legendary
Activity: 2912
Merit: 1060
A pstn gateway would work
sr. member
Activity: 336
Merit: 250
What model of modem/router do you have? If oyu put DDWRT on it you can (from memory) schedule power cycles when internet times out or set times.

I remember it being handy when I was in a shitty area where dropouts were common (damn kookaburras on the phone wires haha)
sorry, I went in vacation out if the country and lost track of my own thread.  But as soon as I got back I bought a new netgear WNDR4500.  It's fast as hell!!  I get 115mb/s on my iMac wireless.  My comcast contract is for only 25mb/s.

All good - you can look into the X10 gear for remote power control.

http://www.smarthome.com/_/X10_Compatible/_/23X/land.aspx

Kinda pricey but cool if you are planning on home automation already.

Unfortunately DD-WRT is still a work in progress for your modem so any scheduling options are not applicable.
hero member
Activity: 752
Merit: 500
What model of modem/router do you have? If oyu put DDWRT on it you can (from memory) schedule power cycles when internet times out or set times.

I remember it being handy when I was in a shitty area where dropouts were common (damn kookaburras on the phone wires haha)
sorry, I went in vacation out if the country and lost track of my own thread.  But as soon as I got back I bought a new netgear WNDR4500.  It's fast as hell!!  I get 115mb/s on my iMac wireless.  My comcast contract is for only 25mb/s.
sr. member
Activity: 336
Merit: 250
What model of modem/router do you have? If oyu put DDWRT on it you can (from memory) schedule power cycles when internet times out or set times.

I remember it being handy when I was in a shitty area where dropouts were common (damn kookaburras on the phone wires haha)
legendary
Activity: 1274
Merit: 1000
Call your power company and cancel service, once they disconnect your house, call back and reactivate service.
hero member
Activity: 826
Merit: 1000
°^°
what are you doing with your stuff? our FBF 7050 runs 24/7 since almost 8 years  Grin
legendary
Activity: 2912
Merit: 1060
You do understand that there's no way to get data if your modem isn't working? Your remote switch will need a 3g modem.
hero member
Activity: 752
Merit: 500
my miner went idol

American Idol? 

Idle is the word you're looking for.  Any router worth using will restart the connection if it dies.
LOL!  I suck at spelling.  I have a Linksys WRT160N.  It was the best when it came out.  I guess I'll have to reinvest.  Any suggestions on a model that will restart?
hero member
Activity: 1246
Merit: 501
my miner went idol

American Idol? 

Idle is the word you're looking for.  Any router worth using will restart the connection if it dies.
vip
Activity: 756
Merit: 503
Maybe use an electronic timer that will switch power off/on for 1sec every X period of time. It could also be done with a pi that ping the Internet and if it fails then switch the modem/router off/on. I would probably simply change the router if a firmware upgrade don't fix the problem.
hero member
Activity: 752
Merit: 500
Today, while away from home, my miner went idol because my internet connection timed out. There's nothing wrong with my service.  My modems need power cycled every so often.  Although it's been happening more lately.  I need to power cycle my modem and router.  Is there such a device that will do this for you if the internet connection goes down?  The device would have to power cycle the router first then the modem.  Then wait for a successful connection.  Any ideas?  Thx!

Remotely power cycle your modem/router is possible. You simple select remote access in your modem/router setting. But I will not recommend you to do this. Because this is a security risk. If you can remotely access your modem/router. So can others, who managed to guess your username and password.

I think a better option, is to update your modem/router firmware. This might help. Or if your modem/router is over 2 years old, it might be time to get a new one.
I'll check when I get home today. I'm freaking out because I had a Lowes delivery guy over yesterday and I mentioned I worked nights.  Then for the first time ever, my miner connected to my pc goes idol.  My Mac is offline too.  I'm hoping there's a device that can remotely power cycle another device.
member
Activity: 84
Merit: 10
Today, while away from home, my miner went idol because my internet connection timed out. There's nothing wrong with my service.  My modems need power cycled every so often.  Although it's been happening more lately.  I need to power cycle my modem and router.  Is there such a device that will do this for you if the internet connection goes down?  The device would have to power cycle the router first then the modem.  Then wait for a successful connection.  Any ideas?  Thx!

Remotely power cycle your modem/router is possible. You simple select remote access in your modem/router setting. But I will not recommend you to do this. Because this is a security risk. If you can remotely access your modem/router. So can others, who managed to guess your username and password.

I think a better option, is to update your modem/router firmware. This might help. Or if your modem/router is over 2 years old, it might be time to get a new one.
Pages:
Jump to: