How can I see the temperature of the GPUs when headless?

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: bubischolz on February 27, 2017, 02:21:39 PM

Hi,
I am running 5 rigs (each with 6* RX 480 8GB XFX XXX). I am running all of them headless with Teamviewer, for which I had to make the onboard graphic my primary source (and disabled rendering of the gpu) .

But when I access the rig now none of the software (f.e. GPU-Z) can show me the temperature of the GPUs. Actually I cannot even access the AMD settings/Wattman etc., or control anything without plugging a monitor in.

In my specific setup plugging in a montitor in all rigs everytime I want to look&change something is a big effort. I read about dummy plugs that I could buy to fake a monitor. But even that is not an option right now for me (living on the ass of the world they will not arrive soon) and I am going on a long trip in 2 weeks.

So is there any other possibility to access those settings when no display is plugged in?

BTW the Motherboard is H81 Pro BTC 2.0

you can with https://bitcointalksearch.org/topic/awesome-miner-powerful-windows-gui-to-manage-and-monitor-up-to-200000-miners-676942 Awesome miner on remote PC's, all mine that are remote in my house are headless but one , i only use monitors on them if I update the card drivers but you can access them on any browser but it only works on win PC ... one of my rigs has the same Mother board...you might need a dumbly plug https://www.amazon.com/CompuLab-4K-Display-Emulator-fit-Headless/dp/B00JKFTYA8 i think it's called . i use RDT if I need to do some thing on a PC, don't care much for team viewer it not to bad to use,it is actually nice but i can't get use to it ...

bubischolz

newbie

Activity: 23

Merit: 0

Quote from: meeow on February 27, 2017, 04:43:41 PM

Claymore miner's temp monitor should still be functional. At least, I can see the temps in the cli output when I use chrome rdp.

Even in claymore I see the temps only when a display is plugged in.

bubischolz

newbie

Activity: 23

Merit: 0

thanks guys. I also tried a long time, so i give up now

and get dummy plugs when i am back.

And just to be double sure and to understand:
I plug a monitor in now, change the settings (f.e. fan speeds/core voltage etc. in AMD settings), then - even when I boot later without a display - those settings still apply, right? I am just wondering because if the AMD settings don´t start in headless mode how can those settings be applied.

meeow

member

Activity: 72

Merit: 11

Quote from: bubischolz on February 27, 2017, 02:21:39 PM

Hi,
I am running 5 rigs (each with 6* RX 480 8GB XFX XXX). I am running all of them headless with Teamviewer, for which I had to make the onboard graphic my primary source (and disabled rendering of the gpu) .

But when I access the rig now none of the software (f.e. GPU-Z) can show me the temperature of the GPUs. Actually I cannot even access the AMD settings/Wattman etc., or control anything without plugging a monitor in.

In my specific setup plugging in a montitor in all rigs everytime I want to look&change something is a big effort. I read about dummy plugs that I could buy to fake a monitor. But even that is not an option right now for me (living on the ass of the world they will not arrive soon) and I am going on a long trip in 2 weeks.

So is there any other possibility to access those settings when no display is plugged in?

BTW the Motherboard is H81 Pro BTC 2.0

Claymore miner's temp monitor should still be functional. At least, I can see the temps in the cli output when I use chrome rdp.

RentGPU

sr. member

Activity: 661

Merit: 258

Quote from: bubischolz on February 27, 2017, 02:21:39 PM

Hi,
I am running 5 rigs (each with 6* RX 480 8GB XFX XXX). I am running all of them headless with Teamviewer, for which I had to make the onboard graphic my primary source (and disabled rendering of the gpu) .

But when I access the rig now none of the software (f.e. GPU-Z) can show me the temperature of the GPUs. Actually I cannot even access the AMD settings/Wattman etc., or control anything without plugging a monitor in.

In my specific setup plugging in a montitor in all rigs everytime I want to look&change something is a big effort. I read about dummy plugs that I could buy to fake a monitor. But even that is not an option right now for me (living on the ass of the world they will not arrive soon) and I am going on a long trip in 2 weeks.

So is there any other possibility to access those settings when no display is plugged in?

BTW the Motherboard is H81 Pro BTC 2.0

Trust this, i have a long time trying the same to view temps,voltages...etc without the need to connect the monitor to the gpus with no hope ,you MUST connect the monitor or a dummy plug to the gpu inorder to have access to gpu data , maybe someone have a good idea to do it.....maybe Roll Eyes

felixbrucker

hero member

Activity: 700

Merit: 500

Quote from: suggsy89 on February 27, 2017, 03:22:01 PM

You need at least one monitor or dummy plug per rig if using the same GPU's

Without this the cards are not "connected to the system" so you will not see temperatures or be able to make changes to core voltages etc.

i noticed some interesting thing here: my 7XXX cards work if you select "connect to vga anyways" in display properties (and so do all newer cards in that rig after enabling it with that trick), whereas my 2XX cards dont offer to even try vga connectivity (when clicking "detect")

not sure why though, they are using same drivers

suggsy89

full member

Activity: 142

Merit: 100

You need at least one monitor or dummy plug per rig if using the same GPU's

Without this the cards are not "connected to the system" so you will not see temperatures or be able to make changes to core voltages etc.

bubischolz

newbie

Activity: 23

Merit: 0

Hi,
I am running 5 rigs (each with 6* RX 480 8GB XFX XXX). I am running all of them headless with Teamviewer, for which I had to make the onboard graphic my primary source (and disabled rendering of the gpu) .

But when I access the rig now none of the software (f.e. GPU-Z) can show me the temperature of the GPUs. Actually I cannot even access the AMD settings/Wattman etc., or control anything without plugging a monitor in.

In my specific setup plugging in a montitor in all rigs everytime I want to look&change something is a big effort. I read about dummy plugs that I could buy to fake a monitor. But even that is not an option right now for me (living on the ass of the world they will not arrive soon) and I am going on a long trip in 2 weeks.

So is there any other possibility to access those settings when no display is plugged in?

BTW the Motherboard is H81 Pro BTC 2.0

Topic: How can I see the temperature of the GPUs when headless? (Read 1281 times)