Since Nicehash is no longer letting us mine to it without an account, I have been trying to make Unmineable work with Awesome Miner. It would be really nice if Unmineable was supported by Awesome Miner.
Good point - I will investigate. 
Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners (Read 703060 times)
November 18, 2024, 07:49:21 AM
November 14, 2024, 05:42:12 PM
Since Nicehash is no longer letting us mine to it without an account, I have been trying to make Unmineable work with Awesome Miner. It would be really nice if Unmineable was supported by Awesome Miner.
November 14, 2024, 11:16:29 AM
Version 10.2.1 (Development preview of 11.0)
ASIC mining
- Add monitoring support for IceRiver ASIC miners running the custom firmware PbFarmer
Features
- Filter expressions for miner list in heat map
Corrections
- Correction to text size when using scaling in Windows
ASIC mining
- Add monitoring support for IceRiver ASIC miners running the custom firmware PbFarmer
Features
- Filter expressions for miner list in heat map
Corrections
- Correction to text size when using scaling in Windows
November 11, 2024, 03:06:29 PM
Version 10.2 (Development preview of 11.0)
Important node
- This release and future releases will only run on 64-bit editions of Windows 10, Windows 11 and Windows Server 2012 or later. Remote Agent and Awesome Miner Server can also run on Linux.
ASIC mining
- Improved support for Goldshell E-DGM1
Features
- Awesome Miner Server can run on Linux
- Awesome Miner Server will now run as a service on Windows. Running the Awesome Miner application with both the user interface and server at the same time is no longer supported. The Awesome Miner application can be used in client mode to connect to the local Awesome Miner Server.
- Rule limits can be configured to be considered per rule or per miner
- Added translation for Brazilian Portuguese
User interface
- Improved Quick Access Toolbar support
- General user interface improvements and corrections
For more information about the Client-Server concept, please see this guide
Important node
- This release and future releases will only run on 64-bit editions of Windows 10, Windows 11 and Windows Server 2012 or later. Remote Agent and Awesome Miner Server can also run on Linux.
ASIC mining
- Improved support for Goldshell E-DGM1
Features
- Awesome Miner Server can run on Linux
- Awesome Miner Server will now run as a service on Windows. Running the Awesome Miner application with both the user interface and server at the same time is no longer supported. The Awesome Miner application can be used in client mode to connect to the local Awesome Miner Server.
- Rule limits can be configured to be considered per rule or per miner
- Added translation for Brazilian Portuguese
User interface
- Improved Quick Access Toolbar support
- General user interface improvements and corrections
For more information about the Client-Server concept, please see this guide
November 06, 2024, 08:17:42 AM
...so I'm guessing it's having the same issue xmrig is having and nothing you can do .
The most recent XmRig version has finally resolved the API monitoring issues. It's included in the latest software definition update. Please give it a try.Thank you I saw that it works great .
November 04, 2024, 02:57:18 AM
...so I'm guessing it's having the same issue xmrig is having and nothing you can do .
The most recent XmRig version has finally resolved the API monitoring issues. It's included in the latest software definition update. Please give it a try. October 15, 2024, 09:00:00 AM
Couple things that still haven't been added to AM that it could really benefit from.
A way for AM to access a basic external API and retrieve/send data to use in variables. Very important for triggers or automating work. AM has it's own API, but can't communicate with external ones.
A 'WAIT' event for Triggers in rules. This allows you to set an amount of time in which rules need to be true (or false) before it triggers. Right now there is no way to do this and it just triggers.
Thanks for the feedback. Both requests make sense.A way for AM to access a basic external API and retrieve/send data to use in variables. Very important for triggers or automating work. AM has it's own API, but can't communicate with external ones.
A 'WAIT' event for Triggers in rules. This allows you to set an amount of time in which rules need to be true (or false) before it triggers. Right now there is no way to do this and it just triggers.
1) Getting data from extenal APIs typically requires some processing of the result, for example processing a JSON result set. It would be possible to do something custom with the C# scripting feature we have today.
Sending HTTP POST requests from Awesome Miner is possible via the Webhook rule action. Variables can be used here as well.
2) Good point. A workaround today would be to make use of variables that you increase like a counter or reset based on certain trigger conditions. You can then have another rule looking if the variable value is above for example 100, indicating that the conditions has been true for a period of time. Yes, it's a bit complicated but it's possible today.
October 11, 2024, 10:53:00 PM
Couple things that still haven't been added to AM that it could really benefit from.
A way for AM to access a basic external API and retrieve/send data to use in variables. Very important for triggers or automating work. AM has it's own API, but can't communicate with external ones.
A 'WAIT' event for Triggers in rules. This allows you to set an amount of time in which rules need to be true (or false) before it triggers. Right now there is no way to do this and it just triggers.
A way for AM to access a basic external API and retrieve/send data to use in variables. Very important for triggers or automating work. AM has it's own API, but can't communicate with external ones.
A 'WAIT' event for Triggers in rules. This allows you to set an amount of time in which rules need to be true (or false) before it triggers. Right now there is no way to do this and it just triggers.
October 08, 2024, 07:14:44 AM
Awesome Miner version 10.1.3
Important note
- Future versions of Awesome Miner and Remote Agent will no longer support Windows 7, Windows 8 and Windows 8.1. Windows 7 is no longer supported by Microsoft since January 2020. Windows 8 and 8.1 are no longer supported by Microsoft since January 2023.
- Future versions of Awesome Miner and Remote Agent will run on Windows 10, Windows 11 and Windows Server 2012 or later. Only 64-bit editions will be supported. Remote Agent will continue to support Linux.
- This release will still run on older versions of Windows but it's recommended to plan for an upgrade of Windows
Awesome Miner Antminer firmware
- Improved integration in Awesome Miner for configuration of auto switching presets
ASIC mining
- Improved detection of failed hash boards and failed fans on Avalon ASIC miners
- BraiinsOS+ 1.2.0 compatibility with better support for applying pools changes
- Initial support for Antminer L9
Mining software
- Lolminer 1.91
- Nanominer 3.9.3
- Rigel 1.19.1
- SrbMiner-Multi 2.6.8
- TeamBlackMiner 2.27
Corrections
- Correction to the ASIC Tools menu not showing correctly in the Main toolbar
Important note
- Future versions of Awesome Miner and Remote Agent will no longer support Windows 7, Windows 8 and Windows 8.1. Windows 7 is no longer supported by Microsoft since January 2020. Windows 8 and 8.1 are no longer supported by Microsoft since January 2023.
- Future versions of Awesome Miner and Remote Agent will run on Windows 10, Windows 11 and Windows Server 2012 or later. Only 64-bit editions will be supported. Remote Agent will continue to support Linux.
- This release will still run on older versions of Windows but it's recommended to plan for an upgrade of Windows
Awesome Miner Antminer firmware
- Improved integration in Awesome Miner for configuration of auto switching presets
ASIC mining
- Improved detection of failed hash boards and failed fans on Avalon ASIC miners
- BraiinsOS+ 1.2.0 compatibility with better support for applying pools changes
- Initial support for Antminer L9
Mining software
- Lolminer 1.91
- Nanominer 3.9.3
- Rigel 1.19.1
- SrbMiner-Multi 2.6.8
- TeamBlackMiner 2.27
Corrections
- Correction to the ASIC Tools menu not showing correctly in the Main toolbar
October 01, 2024, 04:30:56 AM
Does AM support the AMD Ryzen 9 9950X it doesn't show power usage or temperature with any of the miners I tried but does show hash rate and coins per day. .
SO my question is , is it AM or the Miners ?.
the two I tried were SRBMine 2.6,6 and xmrig-6.22.0 with the upload tool in AM .
No Biggie if AM doesn't support the AMD Ryzen 9 9950X , just asking.
I mine mostly Qubic now with Remote desktop thu AM.
and I also noticed it's still @ SRBMine 2.6.4 , so I'm guessing it's having the same issue xmrig is having and nothing you can do .
I've not been able to verify with the Ryzen 9000-series yet so it's likely not supported yet.SO my question is , is it AM or the Miners ?.
the two I tried were SRBMine 2.6,6 and xmrig-6.22.0 with the upload tool in AM .
No Biggie if AM doesn't support the AMD Ryzen 9 9950X , just asking.
I mine mostly Qubic now with Remote desktop thu AM.
and I also noticed it's still @ SRBMine 2.6.4 , so I'm guessing it's having the same issue xmrig is having and nothing you can do .
I've just pushed a mining software definition update to include the latest SrbMiner-Multi and more. It's only XmRig that we keep an older version of now due to monitoring issues in XmRig itself.
September 30, 2024, 09:22:47 AM
Does AM support the AMD Ryzen 9 9950X it doesn't show power usage or temperature with any of the miners I tried but does show hash rate and coins per day. .
SO my question is , is it AM or the Miners ?.
the two I tried were SRBMine 2.6,6 and xmrig-6.22.0 with the upload tool in AM .
No Biggie if AM doesn't support the AMD Ryzen 9 9950X , just asking.
I mine mostly Qubic now with Remote desktop thu AM.
and I also noticed it's still @ SRBMine 2.6.4 , so I'm guessing it's having the same issue xmrig is having and nothing you can do .
SO my question is , is it AM or the Miners ?.
the two I tried were SRBMine 2.6,6 and xmrig-6.22.0 with the upload tool in AM .
No Biggie if AM doesn't support the AMD Ryzen 9 9950X , just asking.
I mine mostly Qubic now with Remote desktop thu AM.
and I also noticed it's still @ SRBMine 2.6.4 , so I'm guessing it's having the same issue xmrig is having and nothing you can do .
September 18, 2024, 03:36:18 PM
Awesome Miner version 10.1.2
Important note
- Future versions of Awesome Miner and Remote Agent will no longer support Windows 7, Windows 8 and Windows 8.1. Windows 7 is no longer supported by Microsoft since January 2020. Windows 8 and 8.1 are no longer supported by Microsoft since January 2023.
- Future versions of Awesome Miner and Remote Agent will run on Windows 10, Windows 11 and Windows Server 2012 or later. Only 64-bit editions will be supported. Remote Agent will continue to support Linux.
- This release will still run on older versions of Windows but it's recommended to plan for an upgrade of Windows
Mining software
- CpuMiner-Opt 24.5
- Lolminer 1.90
Corrections
- Correction to benchmark
Important note
- Future versions of Awesome Miner and Remote Agent will no longer support Windows 7, Windows 8 and Windows 8.1. Windows 7 is no longer supported by Microsoft since January 2020. Windows 8 and 8.1 are no longer supported by Microsoft since January 2023.
- Future versions of Awesome Miner and Remote Agent will run on Windows 10, Windows 11 and Windows Server 2012 or later. Only 64-bit editions will be supported. Remote Agent will continue to support Linux.
- This release will still run on older versions of Windows but it's recommended to plan for an upgrade of Windows
Mining software
- CpuMiner-Opt 24.5
- Lolminer 1.90
Corrections
- Correction to benchmark
September 17, 2024, 06:58:21 AM
is there any chance to add own API Access to miners that are not supported yet?
Thanks for the question. This is unfortunately not supported. Please also note that ASIC miners may have their own authentication concepts, request tokens and other concepts that makes it more complex than just picking a few properties from a JSON response.you got PM already but the FW i talk about is able to give me API token
September 17, 2024, 06:20:35 AM
is there any chance to add own API Access to miners that are not supported yet?
Thanks for the question. This is unfortunately not supported. Please also note that ASIC miners may have their own authentication concepts, request tokens and other concepts that makes it more complex than just picking a few properties from a JSON response. September 15, 2024, 07:18:28 AM
is there any chance to add own API Access to miners that are not supported yet?
September 13, 2024, 05:54:28 PM
Hey Patrik,
1) I just wanted to use the Rigel Miner for dual mining, without ZIL. Any combination I tried AM just uses the single mining config instead of dual mining config:
Command line parameters: -a fishhash -o stratum+tcp://de.ironfish.herominers.com:1145 -u xx+xx -p x --api-bind 0.0.0.0:4029 --no-watchdog
In the performance tab AM already prints the MH for Ironfish and a 0 for the second coin. In the pools tab below he prints pool 1 Herominers and pool 2 the second pool, but with a "Disabled". Maybe this helps.
Can you check that please? In the old versions 9.x it worked, I think... Always used it with ZIL, never had that problem.
I noticed that the dual combinations have been reduced in more recent versions. I've pushed a definition update where Awesome Miner will list a bit fewer dual algorithms. However, there seems to be some dual combinations that are working and some that isn't.1) I just wanted to use the Rigel Miner for dual mining, without ZIL. Any combination I tried AM just uses the single mining config instead of dual mining config:
Command line parameters: -a fishhash -o stratum+tcp://de.ironfish.herominers.com:1145 -u xx+xx -p x --api-bind 0.0.0.0:4029 --no-watchdog
In the performance tab AM already prints the MH for Ironfish and a 0 for the second coin. In the pools tab below he prints pool 1 Herominers and pool 2 the second pool, but with a "Disabled". Maybe this helps.
Can you check that please? In the old versions 9.x it worked, I think... Always used it with ZIL, never had that problem.
Can you please try with EtcHash + Blake3 (Alephium) for example just to make sure the dual concept works in general?
Hey Patrik,
I updated the definition update and already made my text. But after stop/start a few times, it works now. Every time
Tested with ETC+Add and IRON+Add and on different rigs. Everything is fine.So, if it was on my side: I'm sorry! If it was the update: Great job and thanks
September 12, 2024, 04:58:57 AM
Hey Patrik,
1) I just wanted to use the Rigel Miner for dual mining, without ZIL. Any combination I tried AM just uses the single mining config instead of dual mining config:
Command line parameters: -a fishhash -o stratum+tcp://de.ironfish.herominers.com:1145 -u xx+xx -p x --api-bind 0.0.0.0:4029 --no-watchdog
In the performance tab AM already prints the MH for Ironfish and a 0 for the second coin. In the pools tab below he prints pool 1 Herominers and pool 2 the second pool, but with a "Disabled". Maybe this helps.
Can you check that please? In the old versions 9.x it worked, I think... Always used it with ZIL, never had that problem.
I noticed that the dual combinations have been reduced in more recent versions. I've pushed a definition update where Awesome Miner will list a bit fewer dual algorithms. However, there seems to be some dual combinations that are working and some that isn't.1) I just wanted to use the Rigel Miner for dual mining, without ZIL. Any combination I tried AM just uses the single mining config instead of dual mining config:
Command line parameters: -a fishhash -o stratum+tcp://de.ironfish.herominers.com:1145 -u xx+xx -p x --api-bind 0.0.0.0:4029 --no-watchdog
In the performance tab AM already prints the MH for Ironfish and a 0 for the second coin. In the pools tab below he prints pool 1 Herominers and pool 2 the second pool, but with a "Disabled". Maybe this helps.
Can you check that please? In the old versions 9.x it worked, I think... Always used it with ZIL, never had that problem.
Can you please try with EtcHash + Blake3 (Alephium) for example just to make sure the dual concept works in general?
September 11, 2024, 04:38:07 PM
Hey Patrik,
1) I just wanted to use the Rigel Miner for dual mining, without ZIL. Any combination I tried AM just uses the single mining config instead of dual mining config:
Command line parameters: -a fishhash -o stratum+tcp://de.ironfish.herominers.com:1145 -u xx+xx -p x --api-bind 0.0.0.0:4029 --no-watchdog
In the performance tab AM already prints the MH for Ironfish and a 0 for the second coin. In the pools tab below he prints pool 1 Herominers and pool 2 the second pool, but with a "Disabled". Maybe this helps.
Can you check that please? In the old versions 9.x it worked, I think... Always used it with ZIL, never had that problem.
2) And a strange bug. In the newest AM version, if I right click on any column to open the menu, I only gets a white box with a red cross inside. No text.
The only color scheme which works is the "Blue". All others are broken. I'm on Win10 latest build, restarted everything a few times, nothing helped. Only the "Blue" scheme.
Hello.1) I just wanted to use the Rigel Miner for dual mining, without ZIL. Any combination I tried AM just uses the single mining config instead of dual mining config:
Command line parameters: -a fishhash -o stratum+tcp://de.ironfish.herominers.com:1145 -u xx+xx -p x --api-bind 0.0.0.0:4029 --no-watchdog
In the performance tab AM already prints the MH for Ironfish and a 0 for the second coin. In the pools tab below he prints pool 1 Herominers and pool 2 the second pool, but with a "Disabled". Maybe this helps.
Can you check that please? In the old versions 9.x it worked, I think... Always used it with ZIL, never had that problem.
2) And a strange bug. In the newest AM version, if I right click on any column to open the menu, I only gets a white box with a red cross inside. No text.
The only color scheme which works is the "Blue". All others are broken. I'm on Win10 latest build, restarted everything a few times, nothing helped. Only the "Blue" scheme.
I will investigate point #1. For point #2, can you please upgrade to the latest version? We made a change in the new version that hopefully resolved this problem.
Hey Patrik,
the menus are visible again in all schemes, thanks
September 11, 2024, 08:32:18 AM
Hey Patrik,
1) I just wanted to use the Rigel Miner for dual mining, without ZIL. Any combination I tried AM just uses the single mining config instead of dual mining config:
Command line parameters: -a fishhash -o stratum+tcp://de.ironfish.herominers.com:1145 -u xx+xx -p x --api-bind 0.0.0.0:4029 --no-watchdog
In the performance tab AM already prints the MH for Ironfish and a 0 for the second coin. In the pools tab below he prints pool 1 Herominers and pool 2 the second pool, but with a "Disabled". Maybe this helps.
Can you check that please? In the old versions 9.x it worked, I think... Always used it with ZIL, never had that problem.
2) And a strange bug. In the newest AM version, if I right click on any column to open the menu, I only gets a white box with a red cross inside. No text.
The only color scheme which works is the "Blue". All others are broken. I'm on Win10 latest build, restarted everything a few times, nothing helped. Only the "Blue" scheme.
Hello.1) I just wanted to use the Rigel Miner for dual mining, without ZIL. Any combination I tried AM just uses the single mining config instead of dual mining config:
Command line parameters: -a fishhash -o stratum+tcp://de.ironfish.herominers.com:1145 -u xx+xx -p x --api-bind 0.0.0.0:4029 --no-watchdog
In the performance tab AM already prints the MH for Ironfish and a 0 for the second coin. In the pools tab below he prints pool 1 Herominers and pool 2 the second pool, but with a "Disabled". Maybe this helps.
Can you check that please? In the old versions 9.x it worked, I think... Always used it with ZIL, never had that problem.
2) And a strange bug. In the newest AM version, if I right click on any column to open the menu, I only gets a white box with a red cross inside. No text.
The only color scheme which works is the "Blue". All others are broken. I'm on Win10 latest build, restarted everything a few times, nothing helped. Only the "Blue" scheme.
I will investigate point #1. For point #2, can you please upgrade to the latest version? We made a change in the new version that hopefully resolved this problem.
September 11, 2024, 08:31:09 AM
Awesome Miner version 10.1.1
Important note
- Future versions of Awesome Miner and Remote Agent will no longer support Windows 7, Windows 8 and Windows 8.1. Windows 7 is no longer supported by Microsoft since January 2020. Windows 8 and 8.1 are no longer supported by Microsoft since January 2023.
- Future versions of Awesome Miner and Remote Agent will run on Windows 10, Windows 11 and Windows Server 2012 or later. Only 64-bit editions will be supported. Remote Agent will continue to support Linux.
- This release will still run on older versions of Windows but it's recommended to plan for an upgrade of Windows
Features
- Miner graph improved to display values based on the location of the mouse pointer
Mining software
- Rigel 1.19.0
- SrbMiner-Multi 2.6.4
Corrections
- Correction to a scenario where the miner list wasn't displayed correctly
Important note
- Future versions of Awesome Miner and Remote Agent will no longer support Windows 7, Windows 8 and Windows 8.1. Windows 7 is no longer supported by Microsoft since January 2020. Windows 8 and 8.1 are no longer supported by Microsoft since January 2023.
- Future versions of Awesome Miner and Remote Agent will run on Windows 10, Windows 11 and Windows Server 2012 or later. Only 64-bit editions will be supported. Remote Agent will continue to support Linux.
- This release will still run on older versions of Windows but it's recommended to plan for an upgrade of Windows
Features
- Miner graph improved to display values based on the location of the mouse pointer
Mining software
- Rigel 1.19.0
- SrbMiner-Multi 2.6.4
Corrections
- Correction to a scenario where the miner list wasn't displayed correctly
Jump to: