Pages:
Author

Topic: How to solo mine CHN Coin? - page 2. (Read 13223 times)

member
Activity: 83
Merit: 10
May 05, 2013, 11:01:06 AM
#82
Hi i just mined in solo mode by following this instructions.
I have to show you guys something so weird, i just found 383 Blocks with my 2000khs rig.





After a few minutes, the CNC wallet crash and star loading blocks again. it seems i lose all the coins and the registrers of transactions.
I almost cry when i see all those coins and blocks.
I so sad Sad
member
Activity: 113
Merit: 20
May 05, 2013, 09:53:27 AM
#81
how come when i solo mine i dont see any accepted/rejected shares or any U:/wu: numbers
but as soon as i connect to a pool i get it up. its otherwise hashing away as normal and it keeps detecting new blocks?

only seems to happen with chn coins as far as i can see.


You don't have shares when you solo mine.

You either find a block or you don't.

ah, could swear i saw shares when solo mining another alt coin. i guess i was wrong.
thanks!
legendary
Activity: 1526
Merit: 1002
Waves | 3PHMaGNeTJfqFfD4xuctgKdoxLX188QM8na
May 05, 2013, 08:59:13 AM
#80
how come when i solo mine i dont see any accepted/rejected shares or any U:/wu: numbers
but as soon as i connect to a pool i get it up. its otherwise hashing away as normal and it keeps detecting new blocks?

only seems to happen with chn coins as far as i can see.


You don't have shares when you solo mine.

You either find a block or you don't.
member
Activity: 113
Merit: 20
May 05, 2013, 08:56:11 AM
#79
how come when i solo mine i dont see any accepted/rejected shares or any U:/wu: numbers
but as soon as i connect to a pool i get it up. its otherwise hashing away as normal and it keeps detecting new blocks?

only seems to happen with chn coins as far as i can see.
erk
hero member
Activity: 826
Merit: 500
May 05, 2013, 03:34:36 AM
#78
Good BYE CNC, Dontmine me is about to get 51%
"Registration has been temporarily closed due to the large hash rate on this server relative to the total hash power of the network.
It will reopen when the pool/network hash rate (50.54%) drops below 35%


Thank you for your support!"

http://cnc.dontmine.me/register

Looks like it will be a while: 

Net Hash: 2509.29 MH/s   
   
Pool Hash: 1045.63 MH/s
full member
Activity: 168
Merit: 100
May 05, 2013, 03:20:08 AM
#77
Hi all i have finally worked out how to get the cgminer solo mining with a pool as back-up to be honest i can not remember why it just became a challenge lol
is it still solo mining?
Why is it now saying "Stratum from pool 1 detected new block" ? instead of "New block detected on network"
what is the meaning of "Block change for http://127.0.0.1:port detection via http://pool.what.ever:port stratum"
Thanks noel
member
Activity: 112
Merit: 10
May 05, 2013, 01:28:45 AM
#76
also how does the whole reward thing work? If I find a block do only I have the option of solving it? Or is it a race on who solves it first.

Does it mean if I'm outpowered I will always lose?
member
Activity: 112
Merit: 10
May 05, 2013, 01:24:54 AM
#75
There is a lot of hashing power on that coin right now.  I wish I could answer all your questions... but I need some rest.  Just keep mining!

kk goodnight!

if you're solo mining, there is a very high rate of invalids/stales/discarded shares .

This is because there are a few pools out there who are mining the same blocks as you are, so you may be able to actually solve a block, but if that same block has already been solved by the network, it becomes invalid.

It's a race at the moment to get as many blocks solved, there are a few pools out there who you're competing with Smiley

yeah I tried using a pool but got nowhere near the payout as I did solo mining
legendary
Activity: 1596
Merit: 1010
May 05, 2013, 01:14:02 AM
#74
There is a lot of hashing power on that coin right now.  I wish I could answer all your questions... but I need some rest.  Just keep mining!

kk goodnight!

if you're solo mining, there is a very high rate of invalids/stales/discarded shares .

This is because there are a few pools out there who are mining the same blocks as you are, so you may be able to actually solve a block, but if that same block has already been solved by the network, it becomes invalid.

It's a race at the moment to get as many blocks solved, there are a few pools out there who you're competing with Smiley
member
Activity: 112
Merit: 10
May 05, 2013, 01:03:26 AM
#73
There is a lot of hashing power on that coin right now.  I wish I could answer all your questions... but I need some rest.  Just keep mining!

kk goodnight!
member
Activity: 112
Merit: 10
May 05, 2013, 12:52:35 AM
#72
well actually im about 65% rejects, I meant discarded shares, discarded shares are like 95%
member
Activity: 112
Merit: 10
May 05, 2013, 12:49:07 AM
#71
jimmy what are your rejected stale rates Im getting about 99% can you post your cgminer.conf?

Are you solo mining or pool mining?

im back to solo, but both solo and pool mining I am getting 99% rejected, with solo mining before I found a 3 blocks in about 4-6 hours so it seems to be working im assuming.

With solo mining you will get rejects if the share is below the target.  So, the rejects should be Rejected sde3df3ed 126K/526K - I've gotten three in the past couple of hours.  You can also get rejected if your solution isn't as fast to the network as someone else's solution.  There are other factors which get technical.  If you are getting blocks, then it's working.

maybe because of my high hashrate its going through a lot of targets that are lower? could this be a possibility? Another question how many accepts are you getting?
legendary
Activity: 1960
Merit: 1022
May 05, 2013, 12:37:53 AM
#70
Good BYE CNC, Dontmine me is about to get 51%
"Registration has been temporarily closed due to the large hash rate on this server relative to the total hash power of the network.
It will reopen when the pool/network hash rate (50.54%) drops below 35%


Thank you for your support!"

http://cnc.dontmine.me/register
member
Activity: 112
Merit: 10
May 05, 2013, 12:32:45 AM
#69
jimmy what are your rejected stale rates Im getting about 99% can you post your cgminer.conf?

Are you solo mining or pool mining?

im back to solo, but both solo and pool mining I am getting 99% rejected, with solo mining before I found a 3 blocks in about 4-6 hours so it seems to be working im assuming.
member
Activity: 112
Merit: 10
May 05, 2013, 12:19:19 AM
#68
jimmy what are your rejected stale rates Im getting about 99% can you post your cgminer.conf?
full member
Activity: 210
Merit: 100
May 05, 2013, 12:06:50 AM
#67
Download the client & create a chncoin.conf file in your %appdata%\Roaming\Chncoin folder with the following info :

rpcuser=username
rpcpassword=password
rpcallowip=127.0.0.1
rcpallowip=192.168.1.*
rpcport=8108
port=8106
daemon=1
server=1
gen=0


save this file, then restart the chncoin client.

then point your miner to localhost:8108 -u username -p password

Thanks boing. How can I do it with Debian?
full member
Activity: 210
Merit: 100
May 05, 2013, 12:05:09 AM
#66
I guess some people don't understand what "mining" means in cryptocurrencies.

Think of it as there is a block of dirt and somewhere in that dirt is a bag full of coins.

The size of the block of dirt is depend on the difficulty of the coin.  Higher difficulty = bigger block of dirt.

Now Everyone "mining" is currently digging away at that block of dirt looking for the bag of coins.

The higher the hash rate the faster you dig.

Once someone finds the bag, game over and everyone moves on to the next block of dirt.

Solo mining is just yourself digging away and maybe you find the bag.  If you stop or someone else finds the bag game over and move on to the next block.

Pool mining is a bunch of people digging away at the block and sharing the reward base on how much effort you put in.



Couldn't be better explained.
member
Activity: 112
Merit: 10
May 04, 2013, 09:47:35 PM
#65
are you guys getting high discard rates? im getting like 99%
member
Activity: 112
Merit: 10
May 04, 2013, 07:30:15 PM
#64
I guess some people don't understand what "mining" means in cryptocurrencies.

Think of it as there is a block of dirt and somewhere in that dirt is a bag full of coins.

The size of the block of dirt is depend on the difficulty of the coin.  Higher difficulty = bigger block of dirt.

Now Everyone "mining" is currently digging away at that block of dirt looking for the bag of coins.

The higher the hash rate the faster you dig.

Once someone finds the bag, game over and everyone moves on to the next block of dirt.

Solo mining is just yourself digging away and maybe you find the bag.  If you stop or someone else finds the bag game over and move on to the next block.

Pool mining is a bunch of people digging away at the block and sharing the reward base on how much effort you put in.



so should I mine my machines on the same username? or 3 different usernames when solo mining?
newbie
Activity: 42
Merit: 0
May 04, 2013, 07:21:54 PM
#63
I guess some people don't understand what "mining" means in cryptocurrencies.

Think of it as there is a block of dirt and somewhere in that dirt is a bag full of coins.

The size of the block of dirt is depend on the difficulty of the coin.  Higher difficulty = bigger block of dirt.

Now Everyone "mining" is currently digging away at that block of dirt looking for the bag of coins.

The higher the hash rate the faster you dig.

Once someone finds the bag, game over and everyone moves on to the next block of dirt.

Solo mining is just yourself digging away and maybe you find the bag.  If you stop or someone else finds the bag game over and move on to the next block.

Pool mining is a bunch of people digging away at the block and sharing the reward base on how much effort you put in.

Pages:
Jump to: